Terrible just terrible. Now you need to figure out who made the mistake dahua or hik. Buy both and start taking measurements.That's disappointing that the specs are wrong.
How are the specs wrong? Field of View is determined by focal length and sensor size. The two cameras you are comparing do not have similar sensors. There are some great interactive calculators out there to use for this...
Looks great, thanks! Here it is after downloading from Flickr (not sure if Flickr lowers quality).some daytime videos here:
IPCT 4k
[(not sure if/how flickr munges them...)
FrontEastOverview is the Dahau 1831. Camera1 is the new IPCT with goofy dahua-like model number HFW5831RE-I
I'm not doubting you, I'm trying to troubleshoot. I told you I will take care of you no matter what. The reason why I said make sure your power adapters are 12V 2a is because none of mine that I have laying around at my house are.View attachment 38880 Yes, Mike. I have tried 4 different 12V 2a positive tip ac/dc wall wart power adapters that all power my other cams just fine.
I'm not sure you're doing yourself any favors by doubting me in a public forum (granted, your forum, but still).
I wanted to like this cam, but it just plain doesn't work on 12v.
While I'd most likely only use it with PoE, I'd expect 12v input to work on any new cam...
I will initiate Amazon return process. You and they can figure it out. No need to replace it. thanx.
Sounds good. PM me your address, going to send you some IPCT goods for your troubles.i understand. i troubleshoot things for a living myself. no hard feelings.
I'm sure it's just a fluke QA oversight. Amazon return initiated.
Pray tell why not. There are lots of folks here who dont know what they are doing. For example in your other posts you didnt even know the sensor size of a camera. You may or may not be one of them. Mike was clear that it would be replaced and you are within your right to return it to amazon. These are hikvisions, we know they are reliable. Your experience not withstanding.View attachment 38880 Yes, Mike. I have tried 4 different 12V 2a positive tip ac/dc wall wart power adapters that all power my other cams just fine.
I'm not sure you're doing yourself any favors by doubting me in a public forum (granted, your forum, but still).
I wanted to like this cam, but it just plain doesn't work on 12v.
While I'd most likely only use it with PoE, I'd expect 12v input to work on any new cam...
I will initiate Amazon return process. You and they can figure it out. No need to replace it. thanx.
For anyone wondering, the DS-1280ZJ-XS & CBXS mounts should work for this camera. I'm using this one from Amazon: https://www.amazon.com/gp/product/B071F3TXQT/ref=oh_aui_search_asin_title?ie=UTF8&psc=1
nice. you have the IR on in that shot?
looks like some IR reflections off snow or dust floating by.
IR probably not needed, so you might eliminate those by disabling it...
Not mine, but found on YT.
I plan on posting some videos as soon as the snow meltsAnyone have some night time video of this camera?