Adding Nvidia GPU to Blue Iris and Code Project AI Install

Awesome. I have tons of white light. Not your big box store stuff, either. Commercial floods running off RAB motion sensors.

Is there a decent primer type document on how to configure all of this stuff? I don't want to bother you guys with all of these questions before I get some more base background knowledge.

Seems like it could get complicated between hardware AI vs software. I've seen a lot of posts here where people refer to recording 24/7 on substreams, with it set up to record full-resolution mainstreams if motion is detected. Also wondering how easy it is to search for incidents when using a mix of hardware and Code Project based AI.

Even something on best practices to get me started would be appreciated.
 
Ookie said:
Good info, thanks for posting. Which Meshify did you go with? I'm between either Meshify 2 or Meshify 2 Compact. Seems like the compact still has more than enough space, as it's still a mid tower.

Good info on the 10XX series issues. Just realized that you posted it already above and I missed it. Guys are saving my tail left and right here, I really appreciate it. I'm wondering if I perhaps go with wittaj's suggestion. Get a 14th gen i9 and try to run everything off CPU until the product matures.
Click to expand...
I went with the Meshify 2. Barely can fit all the HDDs and large motherboard in this case.

I have a 12 gen i9 with plenty of power, but still am enjoying the GPU for AI.
 
You must log in or register to reply here.
Top Bottom