Annke WZ500 info

[anetbanned]

It would appear from the pic there are several possibilities for separating that housing given the angle of the shot and no detail about what's down in the recesses. The slots on each side may well be access to a simple snap/tab fastener method that holds it together.

Are you able to log directly into the working camera(s) WebUI or is access totally dependent on the NVR interface? And out of curiosity, which Sannce NVR do you have?

I've put my WZ500 on the shelf due to the firmware being pure shit without cloud proxy connectivity. I had it working well with Blue Iris and actual direct PTZ control via mouse pointer on the image and it all went south after a reboot. Was never able to recover that capability again and haven't touched it since.

Anyone else have one of these working dependably without needing the constant P2P connection for ONVIF authentication? Everything I've tried suggests cloud connectivity is required for ONVIF authentication to allow certain levels of functionality.

Sannce seem to use generic names.
So Device name is PoE NVR, and the Device Model is 8CH-5MP

I have the camera connected via both wifi and ethernet cable.
Searched for the camera using ONVIF after setting port on both devices to 8999, and it was pretty much plug & play after that.
I can also use the wifi IP assigned to the camera to get to its web interface, using ie addon for chrome or edge in ie mode.

As for opening the top, I cant seem to find any hidden tabs...

And plugging the cable for the LEDs, well several reason depending on the person I guess.
For me I have my camera indoors, and I dont want my neighbours knowing it's there. The red IR LEDS and white LEDs would give away its location.
Also I assume even if you disable the LEDS in the webui, when the camera reboots every night, the LEDs will probably turn on for it's start-up test.
Simply pulling the cable guarantees the LEDS will never turn on for whatever reason.
If you remember how to open the white part of the housing, please let me know.

 

[brtsq]

We are taking them apart, because the firmware is not working correctly. for example, i have zero control over the white lights in my webui. And a single reboot messes up all the settings on top of that.
But i'm about to stop using the device anymore. I've opted to just buy a decent one. The "low" price isn't that low if you consider the hurdles and issues.

 

[ocenak]

Hello friends, I am sending my working link to the camera, maybe it will be useful to someone.
'ass'- your own or blank password

To reboot


To main stream


To sub stream:


led light off:

Hello and thank you for your work and share

I have a Annke camera model I51DW, and I need also to control the white led possible by the curl commands as you got it

But I try to executed this commands:

curl -s --user 'admin:' '192.161.10.241/form/IRset/IRmode=1&c2bwthr=0&bw2cthr=21&Dualenable=0&luminval=50&IRenable=0&IRdelay=3'

Changing the IP address the user and the password, but without success for now



I think that I need to adjust the commands to my camera model, can you please let me know how can I check the Curl commands that i have to execute in order to get this to work?

Thank you in advance for your support and best regards