- Nov 1, 2014
- 1,826
- 1,186
Any stand-alone ONVIF NVR with people, vehicle and animal AI detection?
- Thread starter TechBill
- Start date
- Nov 1, 2014
- 1,826
- 1,186
- Nov 1, 2014
- 1,826
- 1,186
I tried intrusion first and no trigger on video timeline in NVR then I tried trip wire .. still no trigger on video timeline so I watch the video while a friend walk around and it not flashing red or anything even when he enter the intrusion box or cross the trip wire..
I am sure I missed a setting somwhere .. The new GUI is really confusing compare to the old one .. I did make sure on NVR to mark all detection or trip under camera chanell 24/7 setting but still seeing nothing mark when I search for any triggers in NVR.
Am I missing a setting somewhere?
Also, is there a way to make drawing video box bigger when drawing a rule in it?
I am sure I missed a setting somwhere .. The new GUI is really confusing compare to the old one .. I did make sure on NVR to mark all detection or trip under camera chanell 24/7 setting but still seeing nothing mark when I search for any triggers in NVR.
Am I missing a setting somewhere?
Also, is there a way to make drawing video box bigger when drawing a rule in it?
- Nov 1, 2014
- 1,826
- 1,186
Would you take a look at my previous thread? I am scratching my head on this one. He did get a notificaiton once saying Motion Detected: Human but it still not marking the search playback video timelime with colored bars. Thw older cameras flags it fine in timebar.
Did You selected in Storage->schedule for this camera/channel General + Motion + Intelligent/IVS for all hours/days?
Something like:
Something like:
- Nov 1, 2014
- 1,826
- 1,186
Yes I did that part the other day. Also, there another setting where I need to check radio button dots so I did that part too. One where we select which camera resolution to record and snapshots.
Did You configured the IVS wizard on camera to the end?
It has many steps / pages.. Did You selected & drawed rules?
Put screen shot of configured IVS menu here...
It has many steps / pages.. Did You selected & drawed rules?
Put screen shot of configured IVS menu here...
- Nov 1, 2014
- 1,826
- 1,186
- Nov 1, 2014
- 1,826
- 1,186
- Nov 1, 2014
- 1,826
- 1,186
You didn't put this screenshot here
I was in proxess to do this but got interrupted by a call and accidently press post or something .. redoing the rules and Ill post in a minute
- Nov 1, 2014
- 1,826
- 1,186
Attachments
Yes...
1. go to AI -> AI search -> IVS, select channel / camera and click search...
You should see here thumbnails with IVS events, clickable to videos...
2. go to SEARCH, select channel / camera and You should see clickable blue marks on timeline...
if both works ok, then everything is setup ok... if not - something missing...
1. go to AI -> AI search -> IVS, select channel / camera and click search...
You should see here thumbnails with IVS events, clickable to videos...
2. go to SEARCH, select channel / camera and You should see clickable blue marks on timeline...
if both works ok, then everything is setup ok... if not - something missing...
- Nov 1, 2014
- 1,826
- 1,186
- Nov 1, 2014
- 1,826
- 1,186
I am seeing yellow mark instead of blue .. nothing on blue. .. I know yellow is only motion detection I uncheck the yellow but no blue .. strange when i uncheck the yellow it all became black bars ..