Auto tracking ptz ip camera and MINI PTZ IP Camera Update file

[vasycara]

Http// port 80 Can not be changed.

View attachment 14329View attachment 14330

Try http port 1025

 

[chicca01]

No good.

 

[vasycara]

View attachment 14333No good.

try http port 1025
then seek ip cam http://192.168.2.99:1025

 

[chicca01]

try http port 1025
then seek ip cam http://192.168.2.99:1025

Thanks a lot man.
What is the next thing I need to do

 

[chicca01]

And Here is nothing to find.

 

[vasycara]

click search.

 

[chicca01]

I press search. wait a few minutes.

No camera to find

 

[vasycara]

try of power, power on.
In SADP appears ip cam?

 

[chicca01]

If I restart the camera in SADP he is found.
but the http port 1025 in SADP jumps back to 80

 

[vasycara]

If I restart the camera in SADP he is found.
but the http port 1025 in SADP jumps back to 80

Accesses Ip cam in Internet Explorer with the password of admin and there you can do firmware updates.
Attention if firmware is not good, ip cam can be brick.
I do not have this ip cam, I have huisun mini PTZ.

 

[Bigboboz]

Auto tracking ptz ip camera and MINI PTZ IP Camera Update file

CMOS IMX222 and IMX322 does not matter Upgrade file . Upgrade only to upgrade the ROM chip. Chip must be S2L, models must ( YC-110AR, YC-110AR-AU,YC-HD785R-20X,YC-HD785R-20XA) . Upgrade recommendations directly connected to the computer upgrade. Network can not be interrupted.

My model name doesn't show up in the batch tool or in the IE configuration. Batch tool does state the Chip as Am_S2Lm. I bought this one
https://www.aliexpress.com/snapshot/7989738777.html?orderId=77472280378516&productId=32583148851

So it looks like it's the right model but annoying the model name doesn't show. Anyone else not seeing their model name show up?

 

[cball]

Mine doesn't show up ether.
I was able to update but Auto tracking functionality still doesn't show up.
I'm out of town, so I can't post details.

 

[chicca01]

Accesses Ip cam in Internet Explorer with the password of admin and there you can do firmware updates.
Attention if firmware is not good, ip cam can be brick.
I do not have this ip cam, I have huisun mini PTZ.

.

 

[cuistots]

Hello,
I met the same problem, but I solved him by disconnecting the camera then to delete the plug- in under Internet Explorer and
I have him to reinstall, and the icon of the auto tracking is reappeared.

 

[cball]

Now I'm home.
Here are my settings (notice that the model field is blank):


The model field was blank before updating as well and is also blank when entering with telnet.
Here is how my PTZ looks like.



Maybe @YUNCHCCTV may help?

 

[Bigboboz]

Thanks. I'll roll the dice and give it a go. The batch tool says I have the right chip...

 

[alastairstevenson]

Model is blank in the configuration generally.
It's not too hard to back up the entire flash as a fallback : https://www.ipcamtalk.com/showthrea...kup-the-system?p=113623&viewfull=1#post113623

 

[CodeGreen]

I would suggest using a computer that is hardlined to the router and not over wifi when updating

 

[YUNCHCCTV]

Now I'm home.
Here are my settings (notice that the model field is blank):
View attachment 14401

The model field was blank before updating as well and is also blank when entering with telnet.
Here is how my PTZ looks like.

View attachment 14402

Maybe @YUNCHCCTV may help?

auto tracking ptz ip camera ? mini ptz ip Camera ?

 

[cball]

auto tracking ptz ip camera ? mini ptz ip Camera ?

http://s.click.aliexpress.com/e/ciQKU6za

Ordert on Jun 27, 2016