Best deal on Imporx (Huisun) v2!

atom said:
You should only need to set each preset in the browser, then they will just work in BI without having to do the BI part of your process above.
Click to expand...

lololol, yup Thank You got it now. Set a few more presets using just the camera UI and works with out mirroring it in BI just fine. Thank You. lolol

lol pozzella! Yup, camera did not reboot doing it with just camera ui. So much easier and faster this way. :)
 
Monica sent fw but I'm not sure if it's the latest?
8366005305971d3c8efdeae21ae028f7.jpg


Sent from my QTAQZ3 using Tapatalk
 
Looks like it. Can you share?
 
hmm.. i upgraded but now i cant access it from tinycam pro or ivms4500.i get this error when trying to install web plugin.sadp tool sees it.i can login with web browser.cant see video from web browser though.

Untitled.jpg
 
Last edited by a moderator:
:rolleyes:nm i checked tutorial again.says to reboot computer.webplugin installed fine.now apps can see it local
 
Hm, my v2 (4x) didn't take this file. "Equipment upgrade unsuccessfully" at around 80%. What does it say in the instructions?
 
Last edited by a moderator:
Last edited by a moderator:
w1zofaz said:
Yup, I think it is a voltage thing. I just checked the voltage using the camera UI (night time with IR's on) and it is polling about 10.5 - 10.8 volts. Happily all seems to be working now. But if I ever get another one of these cameras I will go ahead and get the higher voltage power supply.
Click to expand...

+1 @pozello - post #494. Specifically it's a voltage drop thing. See Wikipedia definition of the PoE standard and the power available AT the device: https://en.m.wikipedia.org/wiki/Power_over_Ethernet

Generally, voltage drop problems are addressed by lowering the resistance of the circuit, i.e., shortening the length of the circuit, increasing the wire size (cat6 vs cat5), and/or using pure copper instead of CCA Ethernet cable.

Increasing the voltage of the power supply will work provided it is within the range of the device's voltage specification. Generally, here in the U.S., the UL Standard specifies electrical devices should be able to be operated within plus or minus 10% of it's listing.

I do not have a PoE+ switch and because of my reading of all the posters on this wonderful website regarding issues with this camera's PoE, I decided to power my camera with a separate 12 volt, 2amp power wart that is less than 10 feet from the camera. Of course this means you need and electrical outlet nearby. In my case, my camera has been working problem free for 4+ months (fingers crossed) :)
 
Last edited by a moderator:
vabch22 said:
Hey guys, looking at picking one of these up to try. What is the difference between the model w/ the black face and white face? I thought both were 2nd gen, but maybe only the black faced one is? Which is the best one to get or are they the same minus the enclosure? Thanks

http://www.aliexpress.com/store/pro...m-and-Audio-with-POE/1248007_32647537962.html

http://www.aliexpress.com/store/pro...-10X-with-POE-IR-80m/1248007_32649759690.html
Click to expand...


The black face is the newer generation 2 version.
 
w1zofaz said:
Yup, I think it is a voltage thing. I just checked the voltage using the camera UI (night time with IR's on) and it is polling about 10.5 - 10.8 volts. Happily all seems to be working now. But if I ever get another one of these cameras I will go ahead and get the higher voltage power supply.
Click to expand...

Where in the camera's UI does it show voltage? I'm not seeing it in mine.
 
which browser are u guys using to view huisun webpage? i was using ie tab in chrome but video no loonger shows.
 
Not sure if it's a version issue, but IE8 was from over 5yrs ago. Can you upgrade to IE11? Or try FF.
 
  • Like
Reactions: mando209
For the record, mine is polling 11.7-11.8 during the day, IR off, no PTZ movement.
 
Last edited by a moderator:
You must log in or register to reply here.
Top Bottom