I've got IP addresses and ports matching in both the general settings/Web Server and the Camera/video settings and still cannot connect to my Avacom H5080W.
Find/Inspect under camera configuration returns:
Opening port 81...
HTTP Get / request...
Redirected to 192.168.1.103:81
OK
ONVIF GetSystemDateAndTime
HTTP 12152
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
I'm still getting the Cam1: No signal error message. Camera was working fine earlier today. Firewall is not blocking, and router is properly configured to pass on port 81.
Any ideas what I should check next? This is not the first time this camera has acted up like this, but Fenderman was able to help last month.
Thanks,
Dan
Find/Inspect under camera configuration returns:
Opening port 81...
HTTP Get / request...
Redirected to 192.168.1.103:81
OK
ONVIF GetSystemDateAndTime
HTTP 12152
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done
I'm still getting the Cam1: No signal error message. Camera was working fine earlier today. Firewall is not blocking, and router is properly configured to pass on port 81.
Any ideas what I should check next? This is not the first time this camera has acted up like this, but Fenderman was able to help last month.
Thanks,
Dan