BI camera settings / Options settings

[DanLins]

I've got IP addresses and ports matching in both the general settings/Web Server and the Camera/video settings and still cannot connect to my Avacom H5080W.

Find/Inspect under camera configuration returns:
Opening port 81...
HTTP Get / request...
Redirected to 192.168.1.103:81
OK
ONVIF GetSystemDateAndTime
HTTP 12152
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done

I'm still getting the Cam1: No signal error message. Camera was working fine earlier today. Firewall is not blocking, and router is properly configured to pass on port 81.

Any ideas what I should check next? This is not the first time this camera has acted up like this, but Fenderman was able to help last month.

Thanks,

Dan

 

[gwminor48]

Is it wired or wireless?

 

[DanLins]

Cat5

 

[DanLins]

Actual message is, "Error: 8000274d (refused; check IP address and port) 0"

 

[fenderman]

did you check

Actual message is, "Error: 8000274d (refused; check IP address and port) 0"

Check them

 

[DanLins]

Checked and rechecked and rechecked. Don't know about the Discovery/ONVIF port, however: it is set at 8999 for some reason, but may not matter(?).

The webserver address is NOT the same as the camera, but I don't understand how to change it, since it appears to be an un-editable field.

 

[fenderman]

Checked and rechecked and rechecked. Don't know about the Discovery/ONVIF port, however: it is set at 8999 for some reason, but may not matter(?).

The webserver address is NOT the same as the camera, but I don't understand how to change it, since it appears to be an un-editable field.

The webserver WAN address is not editable because it is you WAN address...

 

[fenderman]

select your camera from the dropdown list

 

[DanLins]

Did that. The dropdown list has Avacom H50xx, with a media/video/RSTP port of 554.

No joy.

 

[DanLins]

Rebooted router and computer, still no good.

 

[fenderman]

Rebooted router and computer, still no good.

are you able to access the camera via browser?

 

[DanLins]

Yep, at 192.168.1.100

 

[DanLins]

Got it ! It was that 554 port that was the problem.

Thanks (again), Fenderman.

Dan