BI camera settings / Options settings

D

DanLins

Young grasshopper
Jun 17, 2016
33
1
I've got IP addresses and ports matching in both the general settings/Web Server and the Camera/video settings and still cannot connect to my Avacom H5080W.

Find/Inspect under camera configuration returns:
Opening port 81...
HTTP Get / request...
Redirected to 192.168.1.103:81
OK
ONVIF GetSystemDateAndTime
HTTP 12152
Opening port 8999...
ONVIF GetSystemDateAndTime
HTTP 12029
Checking for common cameras...
Foscam FI86xx/98xx compatible?
Foscam FI89xx compatible?
Foscam FI9821 V2 compatible?
Foscam FI9821 media port compatible?
RTSP port open?
RTSP port detected!
Done

I'm still getting the Cam1: No signal error message. Camera was working fine earlier today. Firewall is not blocking, and router is properly configured to pass on port 81.

Any ideas what I should check next? This is not the first time this camera has acted up like this, but Fenderman was able to help last month.

Thanks,

Dan
 
Is it wired or wireless?
 
Checked and rechecked and rechecked. Don't know about the Discovery/ONVIF port, however: it is set at 8999 for some reason, but may not matter(?).

The webserver address is NOT the same as the camera, but I don't understand how to change it, since it appears to be an un-editable field.
 
DanLins said:
Checked and rechecked and rechecked. Don't know about the Discovery/ONVIF port, however: it is set at 8999 for some reason, but may not matter(?).

The webserver address is NOT the same as the camera, but I don't understand how to change it, since it appears to be an un-editable field.
Click to expand...
The webserver WAN address is not editable because it is you WAN address...
 
Did that. The dropdown list has Avacom H50xx, with a media/video/RSTP port of 554.

No joy.
 
You must log in or register to reply here.
Top Bottom