Menu
What's new

BI crash with reolink

C

chaycock

Getting the hang of it
Joined
Oct 23, 2015
Messages
128
Reaction score
31
What exactly does the "rtsp time sync" option do?

 
I

ipcamdude22

Getting the hang of it
Joined
Dec 10, 2015
Messages
125
Reaction score
4
One of my cameras is a reolink 410 4mp. I saw the thread on direct to disc recording. I don't see the iframe setting so I don't think I have it on this camera. I enabled the timestamp through the web interface since that was suggested, anything else I should do besides the pre-trigger settings? I figure that will be a bit easier on the cpu.
Thanks
 
fenderman

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,903
Reaction score
21,275
ipcamdude22 said:
I read somewhere that the log in for BI should be the same as the log in for cameras, that is not the case is it fenderman?
Click to expand...
Not at all.. As far as I frames it may be called something else post the page with the fps settings.
 
I

ipcamdude22

Getting the hang of it
Joined
Dec 10, 2015
Messages
125
Reaction score
4
fenderman said:
Not at all.. As far as I frames it may be called something else post the page with the fps settings.
Click to expand...
It has Stream type which can be clear or fluent
Resolution (set at 720P)
Frame rate (30)
Maximum bitrate (512)
H.264 profile (Main)

that's it, also, if you use stunnel, will it work with the client app?
 
fenderman

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,903
Reaction score
21,275
ipcamdude22 said:
It has Stream type which can be clear or fluent
Resolution (set at 720P)
Frame rate (30)
Maximum bitrate (512)
H.264 profile (Main)

that's it, also, if you use stunnel, will it work with the client app?
Click to expand...
hmm..maybe its on another page.
Yes the app supports https
 
You must log in or register to reply here.
Top