Blue Iris and Swann DVR8-4400

[fenderman]

So I need to find out my dvr's specific rtsp port number? I figured that since blueiris scans and connects to the dvr then it would populate the necessary fields correctly. I'll check out the sticky and see what i can find. thanks

yes, log in a see for yourself

 

[hekg]

So i've logged into the dvr and searched every screen for an rstp port reference but don't see anything. Just the media port that appears on the IP setup screen of 34567.

 

[dsk96m]

My thing is getting the url correct I think. I dont know

 

[hekg]

The video in the troubleshooting section here is a good place to start. Get that onvif app and find your rtsp url with that. I'm going to try it as soon as I get home to see if I can get the url for my DVR. Thanks for the heads-up fenderman.

 

[hekg]

Not sure if you resolved your issue but I found out that the urls that I needed to plug into blueiris for each analog camera were:
/user=admin_password=yourpassword_channel=1_stream=0.sdp
/user=admin_password=yourpassword_channel=2_stream=0.sdp
/user=admin_password=yourpassword_channel=3_stream=0.sdp

Worked great for me. Now I can see my analog and digital IP cams in blueiris.
cheers

 

[Vader]

Not sure if you resolved your issue but I found out that the urls that I needed to plug into blueiris for each analog camera were:
/user=admin_password=yourpassword_channel=1_stream=0.sdp
/user=admin_password=yourpassword_channel=2_stream=0.sdp
/user=admin_password=yourpassword_channel=3_stream=0.sdp

Worked great for me. Now I can see my analog and digital IP cams in blueiris.
cheers

is there any chance you could post a screen shot of configuration page?

 

[hekg]

Here you go

 

[andymar]

I have the same system is there any way I view this on windows 10 mobile

 

[steve491]

Here are screenshots of both my dvr's settings and the blueiris settings.

Your IP is not complete in the screen shot.!