I noticed that my Hikvision camera feed in Blue Iris is a little blurrier compared to looking through the camera directly. It looks much clearer in the camera than when looking through Blue Iris. Something I can do to make Blue Iris look sharp too? Sorry if this sounds confusing. I'm trying to fine tune and get things setup properly.
Also, just a tip for anyone, in Hikvision I read that adjusting the Exposure Time will help with moving objects (e.g., walking people) so they look clearer. Read that 1/30 or 1/60 is good, but trying to find out a better option.
Any help on the Blue Iris feed to make as clear as direct from camera would be greatly appreciated.
Setup:
Hikvision DS-2CD2032-I and DS-2CD2132-I
Blue Iris 4 / i5 4460 / 8GB
Also, just a tip for anyone, in Hikvision I read that adjusting the Exposure Time will help with moving objects (e.g., walking people) so they look clearer. Read that 1/30 or 1/60 is good, but trying to find out a better option.
Any help on the Blue Iris feed to make as clear as direct from camera would be greatly appreciated.
Setup:
Hikvision DS-2CD2032-I and DS-2CD2132-I
Blue Iris 4 / i5 4460 / 8GB