Oops, that is a flaw. I'll put it on my issue tracker.
If you click one of the handles, the video frame for that position will load in the video player so you can read its timestamp in the video area.
Blue Iris UI3
- Thread starter bp2008
- Start date
Oops, that is a flaw. I'll put it on my issue tracker.
If you click one of the handles, the video frame for that position will load in the video player so you can read its timestamp in the video area.
TheWaterbug
Getting comfortable
I’m consistently impressed at how rapidly you respond!
TheWaterbug
Getting comfortable
Would reverse playback be possible in timeline view, even of multiple cameras. Would this be ridiculously CPU-intensive? What if i only displayed I-frames?
This is already possible. It is less performant than normal playback of course because video files are inefficient to play in reverse, but in my experience it still works quite well. You won't see the reverse playback option or other playback-related things while viewing live video, but the option will appear if you scroll to any point in history.
TheWaterbug
Getting comfortable
Ah, I knew I'd seen it somewhere in the past, but I could never find it again. Until now. Thanks!
I'm going to use this all the time, now that I know where it is.
One modest suggestion--add an explicit button for reverse, perhaps something like this:
This would make the feature a lot more discoverable.
Also in Sthlm.Limit to camera groups was checked, removed it then it works
Thanks for the help!
@TheWaterbug I agree a visual button for reverse playback would be nice.
In the meantime, just in case you did not know, try some relevant hotkeys (aka keyboard shortcuts).
I find that hotkeys is alot faster than clicking some visual icons/buttons during playback.
The hotkey for toggling reverse playback is the backspace (tested to work in a recent UI3 release)
TheWaterbug
Getting comfortable
looney2ns
IPCT Contributor
Read the ui3 help, it's talked about there.
Strange, UI3 not working today???
As part of my daily routine, I log onto UI3 and take a look at anything that transpired overnight, especially after midnight. I have done this daily for the past 18 months. Going to check my BI PC console which is in my shop to see what has changed.
ETA
Not a BI issue, had a strange PC crash apparently, nothing recorded last night after 10:30 P.M. PC was on but no Windows 10 display at all. Had to hard boot and it came back on and I relaunched BI.
Very odd, no power failure, hand built PC has been on 24/7 for 2 years with not one hiccup.
I do not have BI running as a service so that would have been a good test
As part of my daily routine, I log onto UI3 and take a look at anything that transpired overnight, especially after midnight. I have done this daily for the past 18 months. Going to check my BI PC console which is in my shop to see what has changed.
ETA
Not a BI issue, had a strange PC crash apparently, nothing recorded last night after 10:30 P.M. PC was on but no Windows 10 display at all. Had to hard boot and it came back on and I relaunched BI.
Very odd, no power failure, hand built PC has been on 24/7 for 2 years with not one hiccup.
I do not have BI running as a service so that would have been a good test
Last edited:
biggen
Known around here
- May 6, 2018
- 2,704
- 3,088
I updated my original post on the last page, not a BI issue.
Not a BI issue, had a strange PC crash apparently, nothing recorded last night after 10:30 P.M. PC was on but no Windows 10 display at all. Had to hard boot and it came back on and I relaunched BI.
Very odd, no power failure, hand built PC has been on 24/7 for 2 years with not one hiccup.
I do not have BI running as a service so that would have been a good test.
Not a BI issue, had a strange PC crash apparently, nothing recorded last night after 10:30 P.M. PC was on but no Windows 10 display at all. Had to hard boot and it came back on and I relaunched BI.
Very odd, no power failure, hand built PC has been on 24/7 for 2 years with not one hiccup.
I do not have BI running as a service so that would have been a good test.
@bp2008 No rush. When I playback a clip in Clips tab, the playback includes my overlays (overlays have been enabled in camera config).
However, when I playback same triggered event in Timeline tab, the overlays are not there.
UI3 version 223, Blue Iris version: 5.6.2.1
Any chance we can support overlays in Timeline tab for single camera playback? and possibly during group playback?
However, when I playback same triggered event in Timeline tab, the overlays are not there.
UI3 version 223, Blue Iris version: 5.6.2.1
Any chance we can support overlays in Timeline tab for single camera playback? and possibly during group playback?
Attachments
Last edited:
Can anyone tell me how I go about troubleshooting to fix incredibly slow seek times when using the timeline on mobile?
My BI server is connected to a 50 mbit upload connection, and yet I continuously get 'the video stream was lost, attempting to reconnect' error.
How can I make this faster?
P.S. viewing individual clips from the clips tab seems to work just fine.
My BI server is connected to a 50 mbit upload connection, and yet I continuously get 'the video stream was lost, attempting to reconnect' error.
How can I make this faster?
P.S. viewing individual clips from the clips tab seems to work just fine.
Flintstone61
Known around here
Mobile isn't related to your 50 Mbit service,,,it's affected by the Cell networks in the area you're using your phone.
The Condo has some weak Cell service areas...where checking BI server via mobile at home is slow or impossible.
But at home,,,,the Condo BI server works great on Mobile...because my cell service is great.
How to Check the Actual Signal Strength on Your iPhone - iGeeksBlog
The Condo has some weak Cell service areas...where checking BI server via mobile at home is slow or impossible.
But at home,,,,the Condo BI server works great on Mobile...because my cell service is great.
How to Check the Actual Signal Strength on Your iPhone - iGeeksBlog
Sounds like BI is having trouble serving the timeline video at all. Does it work okay when you are on local wifi or a wired LAN? Or on a different device?