Blue iris Web server and google wifi

A

ABnSultan

n3wb
Mar 4, 2018
23
5
Hello i have been trying for the past couple days on a way to be able to access my blue iris remotely but no luck :(

here's my set up
Modem --> google wifi --> PC which run blue iris
Jtr659B.png


so i did double port forwarding
mwgw1Zv.png


and here's the my pc on google wifi port forward
2eWu3vW.png


when i type on my browser the wan ip (2.88.XXX.XXX:8081) it connects fine but when i'm on my 4G it shows errors

also i want to mention even with the double port forwarding and firewall turned off i get the error
dBUV4HY.png
f859baa1-2faa-4209-a028-083b57ae3d30


i spent so many days trying to figure it out but i no longer have any idea what to do :(
please help me.
 

Attachments

  • portForward.png
    portForward.png
    7 KB · Views: 6
  • Screenshot_20180304-221719.png
    Screenshot_20180304-221719.png
    167.2 KB · Views: 6
  • portForward1.png
    portForward1.png
    213.9 KB · Views: 7
  • portforward2.png
    portforward2.png
    33.8 KB · Views: 7
Open Port Check Tool - Test Port Forwarding on Your Router

Test 8081 and make sure you are seeing that as open.

Edit. Nkt sure why tapatalk the pictures show up all blurry.

But regardless is there a reason you dont either bridge or enable dmz to give the google wifi router the direct wan? Are you setting your goggle wifi wan ip as static and using that when port forwarding in the router/modem combo?


I can lend a hand with teamviewer etc if needed, you can also use logmein hamachi and setup a vpn that way. Works pretty well in places that need it and its free for 5 devices. Or if it has open vpn that will work too.



Sent from my SM-J727P using Tapatalk
 
awahl101 said:
Open Port Check Tool - Test Port Forwarding on Your Router

Test 8081 and make sure you are seeing that as open.

Edit. Nkt sure why tapatalk the pictures show up all blurry.

But regardless is there a reason you dont either bridge or enable dmz to give the google wifi router the direct wan? Are you setting your goggle wifi wan ip as static and using that when port forwarding in the router/modem combo?


I can lend a hand with teamviewer etc if needed, you can also use logmein hamachi and setup a vpn that way. Works pretty well in places that need it and its free for 5 devices. Or if it has open vpn that will work too.
Click to expand...

the reason why i can't do that is because the ISP will give you a pre-config modem which you can't modify it
and if you factory reset, the internet won't work :(

pIlRavQ.png
 

Attachments

  • stc modem.png
    stc modem.png
    125.1 KB · Views: 4
looks similar to how google fiber works based on what I have seen in the pfsense world. pppoe and vlans for it to work. regardless when you forward in that router/modem to the wan ip of your google wifi router then port forward accordingly the port does not open?


i run hamachi at my fathers as he has satellite internet where you are behind a nat, works as well as it can via satellite.



Sent from my SM-J727P using Tapatalk
 
You must log in or register to reply here.
Top Bottom