Hi,
I have about 10 IP cameras running on BI now, including one with hikvision. Today I added Hikvision DS-2CD2032F-I to my network. I manage to stream using VLC from the BI computer without trouble through any of the following paths:
rtsp://username
assword@192.168.1.210/
rtsp://username
assword@192.168.1.210:554/
even with any path addition added at the end
For the past 10 cameras, transplanting this to BI works immediately, but it does not work for this camera.
I have looked at ispy database site, tried them all pretty much, upgraded my camera firmware and still have nothing.
In BI, if i use rtsp,
likewise if I use the rtsp address discovered by the find/inspect button: 192.168.1.210/Streaming/Channels/101
or even using HTTP
I get a no signal message on the screen. BUT interestingly, a bit rate of about 500 kB/s.
I am on 4.5.7.0. Has anyone figured out a working address port path combination for this camera? Any help will be greatly appreciated. Thanks!
I have about 10 IP cameras running on BI now, including one with hikvision. Today I added Hikvision DS-2CD2032F-I to my network. I manage to stream using VLC from the BI computer without trouble through any of the following paths:
rtsp://username
rtsp://username
even with any path addition added at the end
For the past 10 cameras, transplanting this to BI works immediately, but it does not work for this camera.
I have looked at ispy database site, tried them all pretty much, upgraded my camera firmware and still have nothing.
In BI, if i use rtsp,
![rtsp.png](/data/attachments/19/19361-f33029434458020cec810479b8004415.jpg)
likewise if I use the rtsp address discovered by the find/inspect button: 192.168.1.210/Streaming/Channels/101
or even using HTTP
![http find inspect.png](/data/attachments/19/19363-472d58e30f0b4c9081485351ac6c66e1.jpg)
I get a no signal message on the screen. BUT interestingly, a bit rate of about 500 kB/s.
![cam - general.png](/data/attachments/19/19362-1dfaec434b08e2104987919a95f978c8.jpg)
I am on 4.5.7.0. Has anyone figured out a working address port path combination for this camera? Any help will be greatly appreciated. Thanks!