I have a NVR-87400 and all the camera's are set for a subnet of 172.16.25.x/24, my business network is 172.16.x.x/16. I can't change my business network and would like to change the subnet of the cameras to something like 192.168.1.x/24. Technical support was not very helpful as I had problems explaining that the NVR can not route packets correctly if the WAN and LAN subnet of the box overlap. I don't want to buy another box to put in front of the NVR just to translate the IP addresses, the NVR system should provide this simple option in the software. Has there been new firmware that allows this, or did I just miss it in the software UI? If anybody could help I would appreciate it.
Last edited: