I have a few Chinese firmware cameras (DS-2CD3935FWD-IWS) running what I assume is some kind of weird firmware that I haven't been able to find a CN version anywhere beside the provider (V5.4.5_170218).
I then have an English firmware NVR (DS-7608NI-I2).
These cameras work via RTSP however I would rather use just standard PnP with them, of course this results in a language mismatch. Is there any possible way of getting these to work together? I have tried reflashing just about every 'potential' firmware I can to the camera, and they all seem to brick it aside from the supplier firmware.
I also can't seem to change the supplier firmware language with hiktools due to the value of it.
Magic number : 0x484B3230
iHeaderCheckSum : 0x00002549 [9545]
iHeadTotalLen : 0x0000006C [108]
iFileNum : 0x00000000 [0]
iLanguage : 0x01AD713B [28143931]
iDeviceClass : 0x00000001
iOEMCode : 0xFFFFFFFF
iFirmwareVer : 0xFFFFFFFF
iFeature: 0xFFFFFFFF
Calculated CheckSum : 0x00002549 [9545]
Any thoughts of how to get this working, or if it is even possible?
I then have an English firmware NVR (DS-7608NI-I2).
These cameras work via RTSP however I would rather use just standard PnP with them, of course this results in a language mismatch. Is there any possible way of getting these to work together? I have tried reflashing just about every 'potential' firmware I can to the camera, and they all seem to brick it aside from the supplier firmware.
I also can't seem to change the supplier firmware language with hiktools due to the value of it.
Magic number : 0x484B3230
iHeaderCheckSum : 0x00002549 [9545]
iHeadTotalLen : 0x0000006C [108]
iFileNum : 0x00000000 [0]
iLanguage : 0x01AD713B [28143931]
iDeviceClass : 0x00000001
iOEMCode : 0xFFFFFFFF
iFirmwareVer : 0xFFFFFFFF
iFeature: 0xFFFFFFFF
Calculated CheckSum : 0x00002549 [9545]
Any thoughts of how to get this working, or if it is even possible?