Connections in BI5 help

J

Jeff Erdmann

n3wb
Sep 17, 2018
22
13
California
Looking for a little guidance. I'm not a tech expert, but have read most of the wiki's and guides. When I look at the status screen in BI and go to the connections tab there have been numerous connection to my system from IP's that are not authorized and look very suspect. The locations are from various countries. I have attached screen shots from the last couple days. BI and all cameras are set up on their own VLAN. I do not have remote viewing enabled on BI. Thanks for any tips or guidance...happy to send over any necessary screenshots of setup.
 

Attachments

  • Annotation 2020-01-10 204537.png
    Annotation 2020-01-10 204537.png
    12.2 KB · Views: 14
  • Annotation 2020-01-11 085400.png
    Annotation 2020-01-11 085400.png
    29.7 KB · Views: 14
  • BI connections 2020-01-10 145532.png
    BI connections 2020-01-10 145532.png
    452.6 KB · Views: 15
  • BI screenshot 2020-01-10 141329.png
    BI screenshot 2020-01-10 141329.png
    376.6 KB · Views: 13
Jeff Erdmann said:
Looking for a little guidance. I'm not a tech expert, but have read most of the wiki's and guides. When I look at the status screen in BI and go to the connections tab there have been numerous connection to my system from IP's that are not authorized and look very suspect. The locations are from various countries. I have attached screen shots from the last couple days. BI and all cameras are set up on their own VLAN. I do not have remote viewing enabled on BI. Thanks for any tips or guidance...happy to send over any necessary screenshots of setup.
Click to expand...
This indicates that someone is landing on your blue iris webserver page. You likely port forwarded a port or went through the remote viewing setup and used upnp. Disable upnp on your router and disable all port forwarding rules.
 
Thanks...The enable web server port WAS checked..although I never went through the setup. I have unchecked that box. Any other locations within BI to check ? No port forwarding rules on router.
 

Attachments

  • Annotation 2020-01-11 092343.png
    Annotation 2020-01-11 092343.png
    42.8 KB · Views: 8
  • Annotation 2020-01-11 093826.png
    Annotation 2020-01-11 093826.png
    19 KB · Views: 8
Jeff Erdmann said:
Thanks...The enable web server port WAS checked..although I never went through the setup. I have unchecked that box. Any other locations within BI to check ? No port forwarding rules on router.
Click to expand...
Even if the web server port was checked that would not grant access from the outside you must have UPNP enabled on the router make sure it’s disabled. You will need the web server enabled if you want local access to it.
 
You must log in or register to reply here.
Top Bottom