I just completed an upgrade to Hikvision 9632 NVR. I have 20 Hikvision cameras on a 48 port POE switch. Noticing a peculiar issue with 4 cameras: 3 of them are Hikvision 2342W and one is a 2142FWD. All have firmware 5.4.1. On playback the event line is solid green but playback is perfect otherwise even frame by frame. I tried to lower motion sensitivity on the NVR but the settings do not stick and no change- solid green. I accessed the cameras directly via the web interface and on live view the main stream image flashes rapidly. Sub stream image is OK. Using web interface set the motion sensing to lowest sensitivity and no change. Have tried rebooting cameras and flashed one of the cameras to a later build of 5.4.1-no change and also reset to factory default. Max bit rate is set like the other cameras in the recommended range and fps is set 8-12. 9632 has latest firmware.
Thanks for any suggestions.
Thanks for any suggestions.