Continuous recording not showing alerts in Playback

[Eric]

So I have my NVR (LTN8708-P8) set to record continuously 24/7 and also have "Enable Motion Detection" and "Enable Dynamic Analysis for Motion" checked.

However when I view my playback history, it only shows the blue continuous bar and shows me no signs of motion/alarms. What am I doing wrong?

 

[fenderman]

@Eric, if you set it to continuous, you can only see the motion alerts via the NVR itself. Not via the web interface...not sure why they did this.

 

[Eric]

Ouch! That's going to be a problem. I guess back to the drawing board then. Thanks for the quick reply!

 

[Michelin Man]

I really wish Hikvision would include this in the web interface/iVMS-4500.

I'm sure I'm not the only one who runs a headless NVR.

 

[Eric]

I'm sure I'm not the only one who runs a headless NVR.

That's exactly my setup as well. I'll have to hook up the NVR to a monitor again but I don't recall seeing motion alerts on the NVR either, but I could be mistaken.

Point is I'd rather not have to be required to have a monitor, keyboard, and mouse hooked up to my system in order to use it when the web interface is available as well. :rolleyes-new:

 

[Michelin Man]

I did know before I bought the NVR people were saying you sorta 'need' to have a mouse and monitor on the NVR. I was hoping they would have fixed it by now lol..

I'm not sure if it's firmware dependent for the motion detection to show up on the NVR itself, I don't have a spare screen to plug in so I can't check mine.

 

[Fruit]

Try to use IVMS4200's event search to view when the motion happened even on continuous (depending on the version of ivms4200, the one i have recently automatically shows List of Events on the right when I do playback). this is from the user manual of ivms 4200 v 2.3.1.3 build20150416

 

[vegas]

I just tried that and nothing....