CPU going to 100% overnight

Below is my settings for the NTP and one of my cameras. Make sure your cameras are pointed to the BI machine's NIC address for the camera NIC.

1586899911175.png

1586899945163.png
 
I have a BI system that has two NICS 192.168.1.235 192.168.2.235

time2.jpg
 
okay thanks guys, it's working now,I was pointing the camera to the time server instead of the IP address of the PC..
 
okay now that I have this working I want to turn my Windows firewall back on and just allow the cameras through to get the time.
So I turned on Windows firewall and allowed nettime.exe and nettimeservice.exe,but that doesn't seem to be working, is there something else I should be allowing through?
 
Put the IP of your time server, BI server, in the cameras setting. Make sure that port 123 is open through Windows.
 
You must log in or register to reply here.
Top Bottom