Dahua Firmware
- Thread starter frankred
- Start date
fenderman
Staff member
- Joined
- Mar 9, 2014
- Messages
- 36,906
- Reaction score
- 21,282
If its not here https://www.ipcamtalk.com/showthread.php/13183-Firmware-for-newer-dahua-cams-as-well-as-detailed-specs-available-here
you will need to get it from the seller.
you will need to get it from the seller.
The following may help.
Go to this site: ftp://ftp.asm.cz/Dahua/kamerove_systemy/_Firmware/04IPC/
Download the Excel file, second on the list.
Check the list for your camera, download file(s), good luck!
Go to this site: ftp://ftp.asm.cz/Dahua/kamerove_systemy/_Firmware/04IPC/
Download the Excel file, second on the list.
Check the list for your camera, download file(s), good luck!
+1 for the FTP site. They have many different firmware versions for most Dahua models ... just not the Chinese versions as far as I have been able to tell. They are a true boon to the community.
fenderman
Staff member
- Joined
- Mar 9, 2014
- Messages
- 36,906
- Reaction score
- 21,282
Do we know who runs the site?
All I can say is it is some place in the Czech Republic... looks like a camera seller.
I've just received three HDW4431C-A cameras that I ordered last week. Two of them have this firmware:
Software Version 2.420.0000.17.R, build : 2016-03-13
WEB Version 3.2.1.331232
ONVIF Version 2.4.2
And the third has this:
Software Version2.420.0000.21.R, Build Date: 2016-07-24
WEB Version3.2.1.364036
ONVIF Version2.42
I see that on the above-mentioned FTP site, there are these firmware files:
DH_IPC-HX4XXX-Eos_Eng_P_Stream3_V2.460.0000.4.R.20160621
General_IPC-HX4XXX-Eos_Eng_P_Stream3_V2.460.0000.4.R.20160621
Is the HDW4431C-A classified under or belong to the IPC-HX4XXX-Eos line? Would one of the above be the correct file to use to update all 3 of my cameras?
What is the difference between the DH vs General bios types?
Software Version 2.420.0000.17.R, build : 2016-03-13
WEB Version 3.2.1.331232
ONVIF Version 2.4.2
And the third has this:
Software Version2.420.0000.21.R, Build Date: 2016-07-24
WEB Version3.2.1.364036
ONVIF Version2.42
I see that on the above-mentioned FTP site, there are these firmware files:
DH_IPC-HX4XXX-Eos_Eng_P_Stream3_V2.460.0000.4.R.20160621
General_IPC-HX4XXX-Eos_Eng_P_Stream3_V2.460.0000.4.R.20160621
Is the HDW4431C-A classified under or belong to the IPC-HX4XXX-Eos line? Would one of the above be the correct file to use to update all 3 of my cameras?
What is the difference between the DH vs General bios types?
The spreadsheets included on the ftp site have a list of every supported model number and it tells you which firmware file applies to each.
As far as I have been able to tell, DH firmware puts the Dahua logo in the corner of the web interface, while General firmware puts some generic text there. I have not noticed any other differences.
As far as I have been able to tell, DH firmware puts the Dahua logo in the corner of the web interface, while General firmware puts some generic text there. I have not noticed any other differences.
You need to be sure choosing the right one! I had tried to install for my cam this one: ftp://ftp.asm.cz/Dahua/kamerove_systemy/_Firmware/04IPC/IPC-HX4XXX-Eos/DH/1606/
but with this Version i bricked my cam. I was hard to find out to resolve the bootloop and flashed the 1601er Version from telnet which is now working again. You have only 5-10 sec. to stop sonia with the newer cams, so it´s really tricky
I have learned to be patient, when installing new images, better to test it from telnet, because only here you can see if the image is working. The config tool doesn´t proof the compatibility!
I have mailed them, that the firmware is broken, but unfortunately they didn´t removed it.
but with this Version i bricked my cam. I was hard to find out to resolve the bootloop and flashed the 1601er Version from telnet which is now working again. You have only 5-10 sec. to stop sonia with the newer cams, so it´s really tricky
I have learned to be patient, when installing new images, better to test it from telnet, because only here you can see if the image is working. The config tool doesn´t proof the compatibility!
I have mailed them, that the firmware is broken, but unfortunately they didn´t removed it.
There is also on dahua a firmware update server, but i found only Chinese versions http://download.dahuatech.com/kit.php
but where do they hide the english ones?
but where do they hide the english ones?
nayr
IPCT Contributor
English firmware's are on the DahuaWiki, http://dahuawiki.com/USA/IPCamera/
Chinese language firmware can also be modified w/English translations.
Chinese language firmware can also be modified w/English translations.
Dear Nayr, I need your help! I'm looking for the firmware for the camera IPC-HDW4433C-A, it's in Chinese, I need Russian! You can give the firmware to my mail Churiloff@inbox.ru
Thank you!
Thank you!
alastairstevenson
Staff member
This firmware for model HDW4431C-A, and I have a newer model than HDW4433C-A! She has a firmware version above that her original firmware https://www.dahuatech.com/download/1428.html
I'm afraid that there will be a brick if I ask for it with an old firmware! What do you think?
I'm afraid that there will be a brick if I ask for it with an old firmware! What do you think?
alastairstevenson
Staff member
Sure - but if invalid, the update attempt should block installation. Hopefully ...
It does have RU language files.
Someone can sell me the firmware for my cameras in Russian? I'm ready to pay for it! Maybe there is a person who will be able to change the language on my registrars, I'm also ready to consider it! Please, who can help me write to my e-mail Churiloff@inbox.ru
Thank you!
Thank you!