U-Boot 2010.06-svn4911 (Nov 10 2017 - 13:59:00)
I2C: ready
DRAM: 118 MiB
gBootLogPtr:00b80008.
spinor flash ID is 0x1940ef
partition file version 2
rootfstype squashfs root /dev/mtdblock5
gParameter[0]:node=bootargs, parameter=console=ttyS0,115200 mem=130M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc.
TEXT_BASE:01000000
Net: Detected MACID:00:40:7f:bb:3d:a1
PHY:0x001cc816,addr:0x00
s3l phy RTL8201 init
MMC: sdmmc init
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'upgrade_info_7db780a713a4.txt'.
Download to address: 0x5000000
Downloading: *#################################################
done
Bytes transferred = 480 (1e0 hex)
CRC number are not the same, our CRC = 1871791624, CRC from file = 4050037456
Crc check error!
PreProcess data error!
Init error!
Using ambarella mac device
TFTP from server 192.168.254.254; our IP address is 192.168.1.251; sending through gateway 192.168.1.1
Download Filename 'failed.txt'.
Download to address: 0x2000000
Downloading: *#
done
Support backupVer:255
state:ff,err_count:03
SPI probe: 32768 KiB W25Q256FV at 0:0 is now current device
Wrong Image Format for bootm command
ERROR: can't get kernel image!
try:kload 0x2000000 succeed!
## Booting kernel from Legacy Image at 02000000 ...
Image Name: Linux-3.10.73
Created: 2020-02-19 4:09:56 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1570160 Bytes = 1.5 MiB
Load Address: 00208000
Entry Point: 00208000
Verifying Checksum ... OK
Loading Kernel Image ...OK
OK
partition file version 2
rootfstype squashfs root /dev/mtdblock5
fail to load bootargsParameters.txt
fail to load bootargsParameters.txt file
Adjust Memory Allocation, dram_size=0x8200000, dsp_ram.start=0x8400000, dsp_ram.size=0x17c00000
crashflasg:1, logmagic:54410011.
Starting kernel ...
Booting Linux on physical CPU 0x0
Initializing cgroup subsys cpu
Linux version 3.10.73 (jenkins@9f58fe5ba4e0) (gcc version 5.2.1 20151005 (Linaro GCC 5.2-2015.11-2) ) #2 PREEMPT Wed Feb 19 12:09:42 CST 2020
CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7d
CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Ambarella S3L (Flattened Device Tree), model: Ambarella S3L Olive Board
os ----- 200000 , 8200000
logmem start:837e000, size:80000.
network type:1.
init gLogRamRes: start=0x837e000;size=0x80000
Memory policy: ECC disabled, Data cache writeback
Ambarella: AHB = 0xe0000000[0xe0000000],0x01000000 0
Ambarella: APB = 0xe8000000[0xe8000000],0x01000000 0
Ambarella: PPM = 0x00000000[0xdfe00000],0x00200000 9
Ambarella: AXI = 0xf0000000[0xf0000000],0x00030000 0
Ambarella: DRAMC = 0xdffe0000[0xef000000],0x00020000 0
Ambarella: DBGBUS = 0xec000000[0xec000000],0x00200000 0
Ambarella: DBGFMEM = 0xee000000[0xee000000],0x01000000 0
Ambarella: IAVMEM = 0x08400000[ ],0x17c00000
Ambarella: FBMEM = 0x00000000[ ],0x00000000
CPU: All CPU(s) started in SVC mode.
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 33020
Kernel command line: console=ttyS0,115200 mem=130M root=/dev/mtdblock5 rootfstype=squashfs init=/linuxrc
PID hash table entries: 1024 (order: 0, 4096 bytes)
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 130MB = 130MB total
Memory: 127032k/127032k available, 6088k reserved, 0K highmem
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
vmalloc : 0x88800000 - 0xff000000 (1896 MB)
lowmem : 0x80000000 - 0x88200000 ( 130 MB)
modules : 0x7f000000 - 0x80000000 ( 16 MB)
.text : 0x80008000 - 0x803afcf0 (3744 kB)
.init : 0x803b0000 - 0x803cc39c ( 113 kB)
.data : 0x803ce000 - 0x803f87a0 ( 170 kB)
.bss : 0x803f87a0 - 0x8041c670 ( 144 kB)
NR_IRQS:240
sched_clock: 32 bits at 90MHz, resolution 11ns, wraps every 47721ms
Console: colour dummy device 80x30
console [ttyS0] enabled
Calibrating delay loop... 812.64 BogoMIPS (lpj=4063232)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
Setting up static identity map for 0x802cfa80 - 0x802cfab4
devtmpfs: initialized
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
DMA: preallocated 256 KiB pool for atomic coherent allocations
L310 cache controller enabled
l2x0: 8 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32020000, Cache size: 131072 B
ambarella-pinctrl e8009000.pinctrl: Ambarella pinctrl driver registered
ambarella-gpio gpio.0: Ambarella GPIO driver registered
bio: create slab <bio-0> at 0
ambarella-dma e0005000.dma: Ambarella DMA Engine
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Switching to clocksource ambarella-cs-timer
NET: Registered protocol family 2
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP: reno registered
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
squashfs: version 4.0 (2009/01/31) Phillip Lougher
jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 248
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
e8005000.uart: ttyS0 at MMIO 0xe8005000 (irq = 61) is a ambuart
ambarella-uart e0032000.uart: Serial[1] use txdma
ambarella-uart e0032000.uart: Serial[1] use rxdma
e0032000.uart: ttyS1 at MMIO 0xe0032000 (irq = 80) is a ambuart
Ambarella read-only mtdblock
mtd .name = amba_spinor, .size = 0x2000000 (32MiB) .erasesize = 0x00010000 (64KiB) .numeraseregions = 0
16 ofpart partitions found on MTD device amba_spinor
Creating 16 MTD partitions on "amba_spinor":
0x000000000000-0x000000040000 : "MinBoot"
0x000000080000-0x0000000c0000 : "U-Boot"
0x0000000c0000-0x0000000e0000 : "hwid"
0x0000000e0000-0x0000000f0000 : "partition"
0x000001040000-0x000001200000 : "Kernel"
0x000001b80000-0x000001fd0000 : "romfs"
0x000001200000-0x000001880000 : "web"
0x0000000f0000-0x000001000000 : "user"
0x000001a70000-0x000001aa0000 : "updateflag"
0x000001aa0000-0x000001b10000 : "config"
0x000001880000-0x0000018a0000 : "product"
0x0000018a0000-0x000001970000 : "custom"
0x000001000000-0x000001040000 : "half-boot"
0x000001b10000-0x000001b80000 : "backup"
0x000001970000-0x000001a70000 : "data"
0x000001fd0000-0x000002000000 : "dgs"
winbond flash, rdsr3:e0
SPI NOR Controller probed
PPP generic driver version 2.4.2
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-ambarella: AMBARELLA-EHCI Host Controller driver
ambarella-ehci e0018000.ehci: EHCI Host Controller
ambarella-ehci e0018000.ehci: new USB bus registered, assigned bus number 1
ambarella-ehci e0018000.ehci: irq 66, io mem 0xe0018000
ambarella-ehci e0018000.ehci: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.10.73 ehci_hcd
usb usb1: SerialNumber: AmbUSB
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
mousedev: PS/2 mouse device common for all mice
Netfilter messages via NETLINK v0.30.
nf_conntrack version 0.5.0 (1984 buckets, 7936 max)
ctnetlink v0.93: registering with nfnetlink.
xt_time: kernel timezone is -0000
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: bic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
sit: IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
ThumbEE CPU extension supported.
VFS: Mounted root (squashfs filesystem) readonly on device 31:5.
devtmpfs: mounted
Freeing unused kernel memory: 112K (803b0000 - 803cc000)
mount: mounting /dev/mtdblock10 on /mnt/pd/ failed: Invalid argument
dh_keyboard:0
libphy: Ambarella MII Bus: probed
ambarella-eth e000e000.ethernet: Ethernet PHY[0]: 0x001cc816!
ambarella-eth e000e000.ethernet: MAC Address[00:40:7f:bb:3d:a1].
[m
[m[0;32;32m[OSA-DRV] OSA Build on Apr 29 2020 at 08:00:43.
[m[0;32;32m[OSA-DRV] SVN NUM: 13056.
[m[0;32;32m[OSA-DRV] Char device create OK !
[m
[0;35m[OSA-DRV] Monitor Task pid=112 tid=112
[m
[m
[m[0;32;32m[LOG-DRV] LOG Build on Apr 29 2020 at 07:59:53.
[m[0;32;32m[LOG-DRV] SVN NUM: 11751.
[m[0;32;32m[LOG-DRV] ramStart:0x837e000;ramSize:0x80000;select:1
[m[0;32;32m[OSA-DRV] Char device create OK !
[m[0;32;32m[LOG-DRV] coreId = 0, logLevel = 2
[m[0;32;32m[LOG-DRV] coreId = 1, logLevel = 2
[m[0;32;32m[LOG-DRV] coreId = 2, logLevel = 2
[m[0;32;32m[LOG-DRV] coreId = 3, logLevel = 2
[m[0;32;32m[LOG-DRV] coreId = 4, logLevel = 2
[m[0;32;32m[LOG-DRV] coreId = 5, logLevel = 2
[m[0;32;32m00:00:02|[DH_Binder] Binder.ko Build on Feb 27 2020 at 04:37:49.
[m[0;32;32m00:00:02|[DH_Binder] SVN NUM: 3518.
[m[0;32;32m00:00:02|[DH_Binder] NameServer Initial OK !
[m[0;32;32m00:00:02|[DH_Binder] Create binder memory pool(size:1044480) OK!
[m[0;32;32m00:00:02|[DH_Binder] Create binder memory pool(size:1044480) OK!
[m[0;32;32m00:00:02|[DH_Binder] Binder Initial OK !
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[DH_Binder] SR driver initial OK !
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[DH_Binder] NS driver initial OK !
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[DH_Binder] Binder driver initial OK !
[m[0;32;32m00:00:02|[SPF] SPF Build on Jul 26 2019 at 09:37:54.
[m[0;32;32m00:00:02|[SPF] SVN NUM: 15605.
[m[0;32;32m00:00:02|[SPF] SIL initial OK !
[m[0;32;32m00:00:02|[SPF] SPF initial ok !
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[SPF] SPF Proc Create OK!!!
[m[0;32;32m00:00:02|[SPF] SPF driver initial ok !
[m[0;32;32m00:00:02|[prc] PRC Driver Build on Jul 26 2019 at 09:36:49.
[m[0;32;32m00:00:02|[prc] SVN NUM: 17110.
[m[0;32;32m00:00:02|[prc] Start to init module!
[m[0;32;32m00:00:02|[SPF] Dai 2 register OK !
[m[0;32;32m00:00:02|[prc] Success to init module!
[m[0;32;32m00:00:02|[pdc]
PDC Build on Feb 19 2020 at 04:03:25.
[m[0;32;32m00:00:02|[pdc] SVN NUM: 11738.
[m[0;36m00:00:02|[pdc] BASE_LINE: 240
[m[0;32;32m00:00:02|[pdc] OSA_kProcCreate OK
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;36m00:00:02|[pdc] PDC_PartionInit ok!!
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[pdc] defog = 0
[m[0;36m00:00:02|[pdc] binderFlag: 0x3, funcap: 0x18518b,0x1070200,0x0,0x0
[m[0;32;34m00:00:02|[pdc] videoOut Channel is 0
[m[0;32;32m00:00:02|[pdc] Find Product: IPC-HDW4830EM.
[m[0;32;32m00:00:02|[pdc] Config size 8296 !
[m[0;36m00:00:02|[pdc] SenCfg Match OK,pCfgParams->pCfg: 7f1a7524
[m[1;37m00:00:02|[pdc] SenExtCfg not match
[m[0;36m00:00:02|[pdc] SenCfgSize: 220 Bytes
[m[0;36m00:00:02|[pdc] SenCfgSize: 220 Bytes
[m[0;32;32m00:00:02|[pdc] Init spiBus0 Successed!
[m[0;32;32m00:00:02|[pdc] Init spiBus2 Successed!
[m[0;32;32m00:00:02|[pdc] Init I2CBus0 Successed!
[m[0;32;32m00:00:02|[pdc] Init I2CBus3 Successed!
[m[0;32;32m00:00:02|[pdc] PDC_MODULE_RESET_STATE
[m[0;32;32m00:00:02|[pdc] Reboot system counter 1!
[m[0;32;32m00:00:02|[pdc] ircut types = [1]
[m[0;32;32m00:00:02|[pdc] ircut types = [5]
[m[0;32;32m00:00:02|[pdc] ircut types = [6]
[m[0;32;32m00:00:02|[pdc] ircut types = [7]
[m[0;32;32m00:00:02|[pdc] ircut types = [8]
[m[0;32;32m00:00:02|[pdc] ircut types = [2]
[m[0;32;32m00:00:02|[pdc] ircut[0] = 1
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;36m00:00:02|[pdc] PDC_pinInit As Usual!
[m[0;36m00:00:02|[pdc] Get reset pin: 22 OK !
[m[0;32;32m00:00:02|[pdc] Get comPort Cfg ok changeGio=65535 !0sa
[m[0;32;32m00:00:02|[pdc] PDC_comInit OK!
[m[0;32;32m00:00:02|[pdc] codecMask 00000080
[m[0;32;32m00:00:02|[SPF] codecType 128 register OK !
[m[0;32;32m00:00:02|[pdc] NAU8810 Proc Add File ok!
[m[1;37m00:00:02|[pdc] In pdc: 0x2
[m[0;32;32m00:00:02|[SPF] Set logicChn OK !
[m[0;32;32m00:00:02|[pdc] PDC_MODULE_SENSOR
[m[0;36m00:00:02|[pdc] Try RtcDev: SocRtc
[m[0;32;32m00:00:02|[prc] PRC_rtcCreate OK
[m[0;32;32m00:00:02|[pdc] phyaddr = 83fe000, memLen = 2000
[m[0;32;32m00:00:02|[pdc] DDRdata crc incorrect, Load from sramFile
[m[0;32;32m00:00:02|[pdc] phyaddr = 83fe000, memLen = 2000
[m[0;32;32m00:00:02|[pdc] DDRdata crc incorrect, Load from sramFile
[m[0;32;32m00:00:02|[pdc] A B OK
[m[0;32;32m00:00:02|[pdc] Both of Chief and Backup File CRC check OK!
[m[0;32;32m00:00:02|[pdc] phyaddr = 83fe000, memLen = 2000
[m[0;32;32m00:00:02|[pdc] DDRdata crc incorrect, Load from sramFile
[m[0;32;32m00:00:02|[pdc] Both of Chief and Backup File CRC check OK!
[m[0;32;32m00:00:02|[pdc] phyaddr = 83fe000, memLen = 2000
[m[0;36m00:00:02|[pdc] Choose RtcType: 5 -> SocRtc
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;36m00:00:02|[pdc] OSA_kProcAddFile:pdcRtc OK!
[m[0;32;32m00:00:02|[pdc] smartIr light count:1
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;36m00:00:02|[pdc] OSA_kProcAddFile:pdcSmartIR OK!
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[pdc] WDT proc Add OSA_kProcAddFile ok!
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[pdc] ADC init ok, id: 1 !
[m[0;32;32m00:00:02|[pdc] sclGpio = [0], sdaGpio = [0]
[m[0;36m00:00:02|[pdc] PDC_keyAdcInit OK
[m[0;32;32m00:00:02|[pdc] keyGpio : 22, pKeyItemTmp: 86ba76a0
[m[0;36m00:00:02|[pdc] OSA_kProcAddFile:pdcKey OK!
[m[0;32;32m00:00:02|[pdc] key num = 1
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[pdc] SramFile init ok !
[m[0;32;32m00:00:02|[pdc] Both of Chief and Backup File CRC check OK!
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:02|[pdc] PDC Driver Initial OK !
[m[0;35m00:00:02|[OSA-DRV] recordTsk Task pid=123 tid=123
[m5jffs2: notice: (80) check_node_data: wrong data CRC in data node at 0x00041efc: read 0x71976cd5, calculated 0x8da4c86.
CATEGORY = 2
IPC Device
insmod: can't insert '/usr/lib/modules/crypt.ko': unknown symbol in module, or unknown parameter
[m
[m[0;32;32m[OSA-APP] OSA Build on Apr 29 2020 at 08:00:36.
[m[0;32;32m[OSA-APP] SVN NUM: 13016.
[m[0;32;32m[libpdi] libpdi.so Build on Feb 19 2020 at 04:03:18.
[m[0;32;32m[libpdi] SVN NUM: 55595.
[m[0;32;32m[libpdi] PDI product has 1 configs!!!
[0;32;32m00:00:04|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[0;32;32m00:00:04|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[m[0;3net eth0: adv: sym 1, asym: 1
2;32m[libpdi] Senet eth0: lp: sym: 0, asym: 0
nsor has 1 sensor(s)
[m[0;32;32m[libpdi] PDI product Init OK!
[m[0;32;32m[libpdi] PDI hwid Get OK!
[m[0;32;32m[libpdi] PDI run in netinit
[0;32;32m00:00:04|[prc] PRC_rtcCreate OK
[m[m[1;33m[libpdi] WARN : TwoEyesCom Dev not exists,status = -1
[m[0;32;32m[libpdi] partionNum=16
[m[0;32;32m[libpdi] Get fpga upgrade cfg failed, use default
[0;32;32m00:00:04|[pdc] FlashTotalSize = 0x2000000
[m[0;32;32m00:00:04|[pdc] The cmd 3221510149 is invalid
[m[m[0;32;32m[libpdi] Get bootsupportswitchpart failed.
[m[0;32;32m[libpdi] Support backup partition !!!
[m[0;32;32m[libpdi] Flashtype = 0x3,patSize = 0x40000,rwSize = 0x10000,ersSize = 0x10000
[m[0;32;32m[libpdi] gFlashCtrlObj.isSupportSwitchPart:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootFromBack:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootVersion:2
[m[1;33m[libpdi] WARN : Heat Dev not exists,status = -1
[m[1;33m[libpdi] WARN : Device has no crypt chip!
[m[0;32;32m[libpdi] phyaddr= 0x83fe000, memLen= 0x2000
[0;32;32m00:00:04|[pdc] Both of Chief and Backup File CRC check OK!
[m[m[1;33m[libpdi] WARN (PDI_mcuCreate|934): Can't open /dev/pdcMcu
[m[0;32;32m[libpdi] PDI_mcuCreate fail
[m[0;32;32m[libpdi] can't find commLen cfg
[m[0;32;32m[libpdi] PDI run in netinit
[m[0;32;32m[libpdi] PDI_eventInit Wrapper OK!!!
[m[0;32;32m[libpdi] run with no coprocessor!
[m
[Systools]: Build on Feb 19 2020 at 04:03:40.
[Systools]:SVN NUM: 54713.
init eth0 to default
[0;36m00:00:04|[libpdi] NET_disableRoute = 0
[meth0:
MAC: <00:40:7f:bb:3d:a1>
[0;36m00:00:04|[libpdi] set eth0 as defaultEth
[mIP: <172.31.100.50> netmask: <255.255.255.0>
phyAddr=0x0
6IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
6netinit uses obsolete (PF_INET,SOCK_PACKET)
Gateway: <172.31.100.1>
[0;32;32m00:00:04|[libpdi] SetGateWay success
[m[0;32;32m00:00:04|[libpdi] hMcu is null
[m[0;32;32m00:00:04|[pdc] SramFile_devRelease OK!
[m[m
[m[0;32;32m[OSA-APP] OSA Build on Apr 29 2020 at 08:00:36.
[m[0;32;32m[OSA-APP] SVN NUM: 13016.
[m[0;32;32m[libpdi] libpdi.so Build on Feb 19 2020 at 04:03:18.
[m[0;32;32m[libpdi] SVN NUM: 55595.
[m[0;32;32m[libpdi] PDI product has 1 configs!!!
[0;32;32m00:00:04|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[0;32;32m00:00:04|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[m[0;32;32m[libpdi] Sensor has 1 sensor(s)
[m[0;32;32m[libpdi] PDI product Init OK!
[m[0;32;32m[libpdi] PDI hwid Get OK!
[m[0;32;32m[libpdi] PDI run in netinit6
[0;32;32m00:00:04|[prc] PRC_rtcCreate OK
[m[m[1;33m[libpdi] WARN : TwoEyesCom Dev not exists,status = -1
[m[0;32;32m[libpdi] partionNum=16
[m[0;32;32m[libpdi] Get fpga upgrade cfg failed, use default
[0;32;32m00:00:04|[pdc] FlashTotalSize = 0x2000000
[m[0;32;32m00:00:04|[pdc] The cmd 3221510149 is invalid
[m[m[0;32;32m[libpdi] Get bootsupportswitchpart failed.
[m[0;32;32m[libpdi] Support backup partition !!!
[m[0;32;32m[libpdi] Flashtype = 0x3,patSize = 0x40000,rwSize = 0x10000,ersSize = 0x10000
[m[0;32;32m[libpdi] gFlashCtrlObj.isSupportSwitchPart:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootFromBack:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootVersion:2
[m[1;33m[libpdi] WARN : Heat Dev not exists,status = -1
[m[1;33m[libpdi] WARN : Device has no crypt chip!
[m[0;32;32m[libpdi] phyaddr= 0x83fe000, memLen= 0x2000
[0;32;32m00:00:04|[pdc] Both of Chief and Backup File CRC check OK!
[m[m[1;33m[libpdi] WARN (PDI_mcuCreate|934): Can't open /dev/pdcMcu
[m[0;32;32m[libpdi] PDI_mcuCreate fail
[m[0;32;32m[libpdi] can't find commLen cfg
[m[0;32;32m[libpdi] PDI run in netinit6
[m[0;32;32m[libpdi] PDI_eventInit Wrapper OK!!!
[m[0;32;32m[libpdi] run with no coprocessor!
[m
[Systools]: Build on Feb 19 2020 at 04:03:40.
[Systools]:SVN NUM: 54713.
IPV6: only init eth0
[0;36m00:00:04|[libpdi] NET_disableRoute = 0
[m"netinit6 help" for help
eth0:
MAC: <00:40:7f:bb:3d:a1>
[0;32;32m00:00:04|[libpdi] hMcu is null
[m[0;32;32m00:00:04|[pdc] SramFile_devRelease OK!
[m[m
[m[0;32;32m[OSA-APP] OSA Build on Apr 29 2020 at 08:00:36.
[m[0;32;32m[OSA-APP] SVN NUM: 13016.
[m[0;32;32m[libpdi] libpdi.so Build on Feb 19 2020 at 04:03:18.
[m[0;32;32m[libpdi] SVN NUM: 55595.
[m[0;32;32m[libpdi] PDI product has 1 configs!!!
[0;32;32m00:00:04|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[0;32;32m00:00:04|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[m[0;32;32m[libpdi] Sensor has 1 sensor(s)
[m[0;32;32m[libpdi] PDI product Init OK!
[m[0;32;32m[libpdi] PDI hwid Get OK!
[m[0;32;32m[libpdi] PDI run in syshelper
[0;32;32m00:00:04|[prc] PRC_rtcCreate OK
[m[m[1;33m[libpdi] WARN : TwoEyesCom Dev not exists,status = -1
[m[0;32;32m[libpdi] partionNum=16
[m[0;32;32m[libpdi] Get fpga upgrade cfg failed, use default
[0;32;32m00:00:04|[pdc] FlashTotalSize = 0x2000000
[m[0;32;32m00:00:04|[pdc] The cmd 3221510149 is invalid
[m[m[0;32;32m[libpdi] Get bootsupportswitchpart failed.
[m[0;32;32m[libpdi] Support backup partition !!!
[m[0;32;32m[libpdi] Flashtype = 0x3,patSize = 0x40000,rwSize = 0x10000,ersSize = 0x10000
[m[0;32;32m[libpdi] gFlashCtrlObj.isSupportSwitchPart:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootFromBack:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootVersion:2
[m[1;33m[libpdi] WARN : Heat Dev not exists,status = -1
[m[1;33m[libpdi] WA
[0;32;32m00:00:05|[prc] Set WdtTimeout To WdtTimeoutMax:47721, instead !
[mRN : Device has no crypt chip!
[m[0;32;32m[libpdi] phyaddr= 0x83fe000, memLen= 0x2000
[0;32;32m00:00:05|[pdc] Both of Chief and Backup File CRC check OK!
[m[m[1;33m[libpdi] WARN (PDI_mcuCreate|934): Can't open /dev/pdcMcu
[m[0;32;32m[libpdi] PDI_mcuCreate fail
[0;32;32m00:00:04|[SEN-DRV] Sensor Build on Jul 25 2019 at 09:50:19.
[m[0;32;32m00:00:05|[SEN-DRV] SVN NUM: 23023.
[m[1;33m00:00:05|[SEN-DRV] WARN (SEN_drvInit|85): get PDC_MODULE_SENSOREXT cfg failed
[m[0;32;32m00:00:05|[SEN-DRV] pInfo->nAdjSensorNum=0
[m[0;32;32m00:00:05|[SEN-DRV] pObj->sensorType= 80
[m[0;32;32m00:00:05|[SEN-DRV] call SEN_drvCoreGetClkSrcObj(2, 0)
[m[0;32;32m00:00:05|[SEN-DRV] SetSensorId 80,0
[m[1;33m00:00:05|[pdc] WARN (PDC_hwidSetSensorId|8325): Get sensorExt cfg failed!
[m[0;32;32m00:00:05|[SEN-DRV] Sensor 80 Init OK. type:2
[m[0;32;32m00:00:05|[OSA-DRV] Char device create OK !
[m[m[0;32;32m[libpdi] can't find commLen cfg
[m[0;32;32m[libpdi] PDI run in syshelper
[m[0;32;32m[libpdi] PDI_eventInit Wrapper OK!!!
[m[0;32;32m[libpdi] run with no coprocessor!
[m
[Systools]: Build on Feb 19 2020 at 04:03:40.
[Systools]:SVN NUM: 54713.
[0;32;32m00:00:05|[IVF-Drv] IVF Driver(SVN:15738) Build on Apr 29 2020 at 08:02:04.
[m[0;32;31m00:00:05|[IVF-Drv] ERROR (IVF_drvInit|694): Invalid data struct defined(72:368:48)!
[mFail to get env coremnt!
Syshelper: WdtSatrtTime = 60(s), appauto = 1, hctosystime = 1500
[0;32;32m00:00:05|[OSA-DRV] Char device create OK !
[m[0;32;32m00:00:05|[IVF-Drv] [Linux-KERNEL][IVF_platResInit]dspGrade:0, dspSums:1
[m[0;32;32m00:00:05|[IVF-Drv] IVF Driver install successfull!
[m[0;32;32m00:00:05|[systools] appauto 's flag = 1
[m[0;32;32m00:00:05|[systools] please wait sonia to send net info
[m[0;32;32m23:16:29|[systools] syshelper rtc clock to sys,time:2022-10-04 23:16 mktime:1664925389 tv_sec:1664925389 tv_usec:000011
[m[0;32;32m23:16:29|[AmbaVideo] AmbaVideo Build on Feb 19 2020 at 04:03:15.
[m[0;32;32m23:16:29|[AmbaVideo] SVN NUM: 24525.
[m[0;32;32m23:16:29|[AmbaVideo] config chan num:1
[m5Vout notice: vout0:0 probed!
5Vout notice: vout1:1 probed!
[0;32;32m23:16:29|[AmbaVideo] ambpriv_dsp_device = 87bf08c0
[m6Amber VIN: vin0: probed!
6Amber VIN: vin1(virtual): probed!
[0;32;32m23:16:29|[AmbaVideo] sensor:80
[m6Amber VIN: IMX274 init(8-lane lvds)
5Vout notice: CVBS:0@1 probed!
5Vout notice: DBus-All:1@0 probed!
6amba_debug_init 248:248.
[: 1: unknown operand
cap_fast =
[0;32;32m23:16:29|[sdcard] SD/SDIO/MMC Driver (sdcard.ko) SVN_NUM : 21354
[m[0;32;32m23:16:29|[sdcard] Version: 2.0.00, Build Date: Feb 19 2020, Time: 04:03:56
[m[0;32;32m23:16:29|[sdcard] SD Memory Card Power En Gpio = 109, Detect Gpio = 65535, hostId = 0
[m[0;32;32m23:16:29|[sdcard] Not Support Wifi Card !
[m[0;32;32m23:16:29|[sdcard] host0 MMC_CAP_NEEDS_POLL
[m[0;32;32m23:16:29|[sdcard] SD Clock: base[48MHz], min[195312Hz], max[50000000Hz].
[mnet eth0: lp: sym: 0, asym: 0
libphy: e000e000.etherne:00 - Link is Up - 100/Full
6IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
ambarella-sd e0002000.sdmmc0: 1 slots @ 50000000Hz
[0;32;32m23:16:30|[sdcard] SD Clock: base[48MHz], min[195312Hz], max[50000000Hz].
[mambarella-sd e001f000.sdmmc2: 1 slots @ 50000000Hz
map_size = 0x500000, nr_item = 3
addr_offset = 0x00000000, filename = orccode.bin
addr_offset = 0x00300000, filename = orcme.bin
addr_offset = 0x003a0000, filename = default_binary.bin
mmap returns 0x769dc000
loading /usr/lib/firmware/orccode.bin...addr = 0x769dc000, size = 0x1ad455
loading /usr/lib/firmware/orcme.bin...addr = 0x76cdc000, size = 0x3392c
loading /usr/lib/firmware/default_binary.bin...addr = 0x76d7c000, size = 0x619c0
===============================================
ucode (S3L) version = 2018/7/19 281966.281888
===============================================
hwid_value =IPC-HDW4830EM:01:02:05:50:21:00:01:0E:01:00:04:2D0:00:00:00:00:00:01:00:00:200
product_name =IPC-HDW4830EM
lens_type =0
fvideo_chip = 80
[0;32;32m23:16:31|[pdc] Get sensorExt cfg failed, so get sensor cfg! [m[0;32;32m23:16:31|[pdc] Get sensorExt cfg failed, so get sensor cfg! [m[0;32;32m23:16:31|[pdc] FlashTotalSize = 0x2000000 [m[0;32;32m23:16:31|[pdc] The cmd 3221510149 is invalid [m[0;32;32m23:16:31|[pdc] Both of Chief and Backup File CRC check OK! [m[0;32;32m23:16:31|[libpdi] hMcu is null [m[m [m[0;32;32m[OSA-APP] OSA Build on Apr 29 2020 at 08:00:36. [m[0;32;32m[OSA-APP] SVN NUM: 13016. [m[0;32;32m[libpdi] libpdi.so Build on Feb 19 2020 at 04:03:18. [m[0;32;32m[libpdi] SVN NUM: 55595. [m[0;32;32m[libpdi] PDI product has 1 configs!!!
[m[0;32;32m[libpdi] Sensor has 1 sensor(s) [m[0;32;32m[libpdi] PDI product Init OK! [m[0;32;32m[libpdi] PDI hwid Get OK! [m[0;32;32m[libpdi] PDI run in gethwid
[m[1;33m[libpdi] WARN : TwoEyesCom Dev not exists,status = -1 [m[0;32;32m[libpdi] partionNum=16 [m[0;32;32m[libpdi] Get fpga upgrade cfg failed, use default [m[0;32;32m[libpdi] Get bootsupportswitchpart failed. [m[0;32;32m[libpdi] Support backup partition !!! [m[0;32;32m[libpdi] Flashtype = 0x3,patSize = 0x40000,rwSize = 0x10000,ersSize = 0x10000 [m[0;32;32m[libpdi] gFlashCtrlObj.isSupportSwitchPart:0 [m[0;32;32m[libpdi] gFlashCtrlObj.bootFromBack:0 [m[0;32;32m[libpdi] gFlashCtrlObj.bootVersion:2 [m[1;33m[libpdi] WARN : Heat Dev not exists,status = -1 [m[1;33m[libpdi] WARN : Device has no crypt chip! [m[0;32;32m[libpdi] phyaddr= 0x83fe000, memLen= 0x2000 [m[1;33m[libpdi] WARN (PDI_mcuCreate|934): Can't open /dev/pdcMcu [m[0;32;32m[libpdi] PDI_mcuCreate fail [m[0;32;32m[libpdi] can't find commLen cfg [m[0;32;32m[libpdi] PDI run in gethwid
[m[0;32;32m[libpdi] PDI_eventInit Wrapper OK!!! [m[0;32;32m[libpdi] run with no coprocessor! [m [Systools]: Build on Feb 19 2020 at 04:03:40. [Systools]:SVN NUM: 54713. hwidValue == 0
vout_support =0
cap_vout =
dspChip = 33
S3LM= 1
sysbackup_value =1
[m
[m[0;32;32m[OSA-APP] OSA Build on Apr 29 2020 at 08:00:36.
[m[0;32;32m[OSA-APP] SVN NUM: 13016.
close cvbs and vout
[m[0;32;32m[libpdi] libpdi.so Build on Feb 19 2020 at 04:03:18.
[m[0;32;32m[libpdi] SVN NUM: 55595.
[m[0;32;32m[libpdi] PDI product has 1 configs!!!
[0;32;32m23:16:31|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[0;32;32m23:16:31|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[m[0;32;32m[libpdi] Sensor has 1 sensor(s)
[m[0;32;32m[libpdi] PDI product Init OK!
[m[0;32;32m[libpdi] PDI hwid Get OK!
[m[0;32;32m[libpdi] PDI run in backupd
[m[1;33m[libpdi] WARN : TwoEyesCom Dev not exists,status = -1
[m[0;32;32m[libpdi] partionNum=16
[m[0;32;32m[libpdi] Get fpga upgrade cfg failed, use default
[0;32;32m23:16:31|[pdc] FlashTotalSize = 0x2000000
[m[0;32;32m23:16:31|[pdc] The cmd 3221510149 is invalid
[m[m[0;32;32m[libpdi] Get bootsupportswitchpart failed.
[m[0;32;32m[libpdi] Support backup partition !!!
[m[0;32;32m[libpdi] Flashtype = 0x3,patSize = 0x40000,rwSize = 0x10000,ersSize = 0x10000
[m[0;32;32m[libpdi] gFlashCtrlObj.isSupportSwitchPart:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootFromBack:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootVersion:2
[m[1;33m[libpdi] WARN : Heat Dev not exists,status = -1
[m[1;33m[libpdi] WARN : Device has no crypt chip!
[m[0;32;32m[libpdi] phyaddr= 0x83fe000, memLen= 0x2000
[0;32;32m23:16:31|[pdc] Both of Chief and Backup File CRC check OK!
[m[m[1;33m[libpdi] WARN (PDI_mcuCreate|934): Can't open /dev/pdcMcu
[m[0;32;32m[libpdi] PDI_mcuCreate fail
[m[0;32;32m[libpdi] can't find commLen cfg
[m[0;32;32m[libpdi] PDI run in backupd
[m[0;32;32m[libpdi] PDI_eventInit Wrapper OK!!!
[m[0;32;32m[libpdi] run with no coprocessor!
[m
[Systools]: Build on Feb 19 2020 at 04:03:40.
[Systools]:SVN NUM: 54713.
[0;32;32m23:16:31|[systools] Boot support backup version 2
[m[0;32;32m23:16:31|[libpdi] Read: blkIndex: 0,pageIndex: 0,byteIndex: 0 ,fLag: ff
[m[0;32;32m23:16:31|[libpdi] Read: blkIndex: 0,pageIndex: 1,byteIndex: 0 ,fLag: ff
[m[0;32;32m23:16:31|[libpdi] Read: blkIndex: 0,pageIndex: 2,byteIndex: 0 ,fLag: ff
[m[0;32;32m23:16:31|[libpdi] Read: blkIndex: 0,pageIndex: 3,byteIndex: 0 ,fLag: ff
[m[0;32;32m23:16:31|[systools] Do not need backup!!!
[m[0;32;32m23:16:31|[libpdi] hMcu is null
[mstart sshd
audioin = 1
sensor_id 80
/usr/local/etc/sshd_config line 20: Deprecated option KeyRegenerationInterval
/usr/local/etc/sshd_config line 21: Deprecated option ServerKeyBits
/usr/local/etc/sshd_config line 33: Deprecated option RSAAuthentication
/usr/local/etc/sshd_config line 40: Deprecated option RhostsRSAAuthentication
wifi = 0
------cap_wifi = 0
cp: can't stat '/usr/data/osd.bmp': No such file or directory
cp: can't stat '/var/tmp/product/ProductTransform': No such file or directory
cp: can't stat '/var/tmp/product/CustomTemplate': No such file or directory
cp: can't stat '/var/tmp/product/CustomPathSensitive': No such file or directory
cp: can't stat '/var/tmp/product/ProductPathSensitive': No such file or directory
cp: can't stat '/var/tmp/product/DefaultAccount': No such file or directory
product=IPC-HFW4830E
cp: can't stat '/var/tmp/product/IPC-HFW4830E/*': No such file or directory
Default manual len in manual
manual
IPC-HDW4830EM
cp: can't stat '/mnt/web/osd.bmp': No such file or directory
cp: can't stat '/var/tmp/osd.bmp': No such file or directory
cap_dsp = DSP
appauto=1
[m
[m[0;32;32m[OSA-APP] OSA Build on Apr 29 2020 at 08:00:36.
[m[0;32;32m[OSA-APP] SVN NUM: 13016.
[m[0;32;32m[libpdi] libpdi.so Build on Feb 19 2020 at 04:03:18.
[m[0;32;32m[libpdi] SVN NUM: 55595.
[m[0;32;32m[libpdi] PDI product has 1 configs!!!
[0;32;32m23:16:38|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[0;32;32m23:16:38|[pdc] Get sensorExt cfg failed, so get sensor cfg!
[m[m[0;32;32m[libpdi] Sensor has 1 sensor(s)
[m[0;32;32m[libpdi] PDI product Init OK!
[m[0;32;32m[libpdi] PDI hwid Get OK!
[m[0;32;32m[libpdi] PDI run in sonia
[m[0;32;32m[libpdi] >>logChn[0]:phyChip[0]:33, phyChn[0]:2
[m[0;32;32m[libpdi] Vin has 1 Cfg(s)
[m[0;32;32m[libpdi] Vout has 1 Cfg(s)
[m[1;33m[libpdi] WARN : TwoEyesCom Dev not exists,status = -1
[m[0;32;32m[libpdi] partionNum=16
[m[0;32;32m[libpdi] Get fpga upgrade cfg failed, use default
[0;32;32m23:16:38|[pdc] FlashTotalSize = 0x2000000
[m[0;32;32m23:16:38|[pdc] The cmd 3221510149 is invalid
[m[m[0;32;32m[libpdi] Get bootsupportswitchpart failed.
[m[0;32;32m[libpdi] Support backup partition !!!
[m[0;32;32m[libpdi] Flashtype = 0x3,patSize = 0x40000,rwSize = 0x10000,ersSize = 0x10000
[m[0;32;32m[libpdi] gFlashCtrlObj.isSupportSwitchPart:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootFromBack:0
[m[0;32;32m[libpdi] gFlashCtrlObj.bootVersion:2
[m[1;33m[libpdi] WARN : Heat Dev not exists,status = -1
[m[1;33m[libpdi] WARN : Device has no crypt chip!
[m[0;32;32m[libpdi] phyaddr= 0x83fe000, memLen= 0x2000
[0;32;32m23:16:38|[pdc] Both of Chief and Backup File CRC check OK!
[m[m[1;33m[libpdi] WARN (PDI_mcuCreate|934): Can't open /dev/pdcMcu
[m[0;32;32m[libpdi] PDI_mcuCreate fail
[m[0;32;32m[libpdi] can't find commLen cfg
[m[0;32;32m[libpdi] PDI_eventInit OK!!!
[m[0;32;32m[libpdi] run with no coprocessor!
[m[32;40m[23:16:39 info Infra 320 Unknown:0][*] 0.0.0.0 Built in 0/ 0/ 0 [*]
[0mReflector::register: type=CDefaultOsdBuilder
[32;40m[23:16:41 info Infra 320 Unknown:0]Some [Manager] files are not commit to SVN server. It compied wtih local modified files.
[0m[32;40m[23:16:41 info Infra 320 Unknown:0]Some [Infra2] files are not commit to SVN server. It compied wtih local modified files.
[0m[32;40m[23:16:41 info Infra 320 Unknown:0]check include version:Infra
[0m[32;40m[23:16:41 info Infra 320 Unknown:0]URL: http://yfsvn.dahuatech.com/svnpl/Renascence/Include/Trunk/Component 721228
[0m[32;40m[23:16:41 info Infra 320 Unknown:0]URL: http://yfsvn.dahuatech.com/svnpl/Renascence/Include/Trunk/Infra 790011
[0m[32;40m[23:16:41 info Infra 320 Unknown:0]URL: http://yfsvn.dahuatech.com/svnpl/Renascence/Include/Trunk/Memory 733517
[0m[32;40m[23:16:41 info Infra 320 Unknown:0]URL: http://yfsvn.dahuatech.com/svnpl/Renascence/Infra/Trunk/Include/MiniInfra 791859
[0m[32;40m[23:16:41 info Infra 320 Unknown:0]URL: http://yfsvn.dahuatech.com/svnpl/Renascence/Include/Trunk/Utils 752500
[0m[0;32;32m[libvsf] libvsf.a svn num: 24526 Last Build:Feb 19 2020 04:04:24
[0;32;32m23:16:42|[Binder-Lib] libbinder.so Build on Feb 27 2020 at 04:37:47.
[m[0;32;32m23:16:42|[Binder-Lib] SVN NUM: 3518.
[m[0;35m23:16:42|[libvsf] ***************VSF FRAMEWORK***********
[m[0;32;32m23:16:42|[libvsf]
[m[0;32;32m23:16:42|[libvsf] /usr/bin/sonia Build on Feb 19 2020 at 04:04:24.
[m[0;32;32m23:16:42|[libvsf] SVN NUM: 24526.
[m[0;32;32m23:16:42|[libvsf] VSF_cfgGetFisheyeCaps: product line 2, model 289; Fish eye type 0, lens mounts 0, corrections 0, DPTZ commands 0.
[m[0;32;32m23:16:42|[libvsf] Initialized server config. Product line 2, model 289. Supporting mask 0x8103019
[m[0;32;32m23:16:42|[libvsf] VSF_shmInit succeed
[m[0;35m23:16:42|[libvsf] Node VSF_Node_0x05010000 created
[m[0;32;32m23:16:42|[libvsf] VSF_ctrlInit succeed
[m[0;32;32m23:16:42|[AEW] AEWB ALG Build on Jul 25 2019 at 09:48:55.
[m[0;32;32m23:16:42|[AEW] SVN NUM: 62486.
[m[0;32;32m23:16:42|[AEW] AMBA LIB: Version:2.5.15 modTime:0x20171212
[m[0;32;32m23:16:42|[AEW] the aew cfg ver: 1.032
[m[0;32;32m23:16:42|[AEW] the aew cfg date time is: 2020-02-19 12:04:03
[m[0;32;32m23:16:42|[AEW] the aew cfg subVer is: 62707.000
[m[0;32;32m23:16:42|[AEW] the aew cfg chipName is:
[m[0;32;32m23:16:42|[AEW] the aew cfg pdtName is: IPC-HF4830E
[m[0;32;32m23:16:42|[AEW] OK, use cfg:/var/tmp/3A/aew_para.bin
[m[0;32;32m23:16:42|[AEW] the aew cfg ver: 1.032
[m[0;32;32m23:16:42|[AEW] the aew cfg date time is: 2020-02-19 12:04:03
[m[0;32;32m23:16:42|[AEW] the aew cfg subVer is: 62707.000
[m[0;32;32m23:16:42|[AEW] the aew cfg chipName is:
[m[0;32;32m23:16:42|[AEW] the aew cfg pdtName is: IPC-HF4830E
[m[0;32;32m23:16:42|[AEW] OK, use cfg:/var/tmp/aew_para.bin
[m[0;32;32m23:16:42|[AEW] the aew cfg ver: 1.032
[m[0;32;32m23:16:42|[AEW] the aew cfg date time is: 2020-02-19 12:04:03
[m[0;32;32m23:16:42|[AEW] the aew cfg subVer is: 62707.000
[m[0;32;32m23:16:42|[AEW] the aew cfg chipName is:
[m[0;32;32m23:16:42|[AEW] the aew cfg pdtName is: IPC-HF4830E
[m[0;32;32m23:16:42|[AEW] OK, use cfg:/var/tmp/3A/aew_para.bin
[m[0;32;32m23:16:42|[AEW] between 2A and sonia msg creat OK
[m[0;32;32m23:16:42|[H3A] H3A Build on Apr 29 2020 at 08:01:33.
[m[0;32;32m23:16:42|[H3A] SVN NUM: 46237.
[m[mFail to get env icrtype!
[0;32;32m23:16:42|[libpdi] [ICR]isReverse = 0
[m[0;32;32m23:16:42|[libpdi] [ICR]aewType = 2
[m[0;32;32m23:16:42|[libpdi] [ICR]nDevNum = 1
[m[0;36m23:16:42|[pdc] needReverse = 0
[m[0;32;32m23:16:42|[pdc] ....turn into DAY mode....
[m[0;32;32m23:16:42|[libpdi] aDex = 1.000000
[m[0;32;32m23:16:42|[libpdi] bDex = 0.000000
[m[0;32;32m23:16:42|[ICR] ICR Build on Feb 19 2020 at 04:03:59.
[m[0;32;32m23:16:42|[ICR] SVN NUM: 52999.
[m[0;32;32m23:16:42|[ICR] icr is created successful!
[m[0;32;32m23:16:42|[ICR] adc is created successful!
[m[0;32;32m23:16:42|[ICR] adc type: 4.
[m[0;32;32m23:16:42|[ICR] adc state get successful!
[m[0;32;32m23:16:42|[ICR] adcState=300300, c2bAdcThr=a000000, realDncMode=0
[m[0;32;32m23:16:42|[ICR] the icr cfg ver: 1.006
[m[0;32;32m23:16:42|[ICR] the icr cfg date time is: 2020-02-19 12:04:00
[m[0;32;32m23:16:42|[ICR] the icr cfg subVer is: 52999.000
[m[0;32;32m23:16:42|[ICR] the icr cfg chipName is: s3l
[m[0;32;32m23:16:42|[ICR] the icr cfg pdtName is: imx274
[m[0;32;32m23:16:42|[ICR] OK, use icr cfg:/var/tmp/3A/icr_para.bin
[m[0;32;32m23:16:42|[AE] SmartIR Build on Feb 19 2020 at 04:04:04.
[m[0;32;32m23:16:42|[AE] SVN NUM: 56476.
[m[0;32;31m23:16:42|[OSA-APP] ERROR (OSA_fileOpen|216): Open failed
[m[0;32;31m23:16:42|[AE] ERROR (APP_commCfgReadCheckParam|89): Open /var/tmp/ir_lens_para.bin file failed
[m[0;32;32m23:16:42|[AE] APP_commCfgReadCheckParam /var/tmp/ir_lens_para.bin failed!
[m[0;32;32m23:16:42|[AE] APP_commCfgLoad /var/tmp/ir_lens_para.bin failed!
[m[0;32;31m23:16:42|[OSA-APP] ERROR (OSA_fileOpen|216): Open failed
[m[0;32;31m23:16:42|[AE] ERROR (APP_commCfgReadCheckParam|89): Open /var/tmp/0/ir_lens_para.bin file failed
[m[0;32;32m23:16:42|[AE] APP_commCfgReadCheckParam /var/tmp/0/ir_lens_para.bin failed!
[m[0;32;32m23:16:42|[AE] Use default zoomPrioFarLightOnPosThr = 365
[m[0;32;31m23:16:42|[libpdi] ERROR (PDI_irisInit|272): Can't open /dev/pdcIris
[m[0;32;31m23:16:42|[libpdi] ERROR (PDI_irisCreate|646): PDI_irisInit err!
[mcreate iris handle failed
[0;32;31m23:16:42|[libpdi] ERROR (PDI_irisInit|272): Can't open /dev/pdcIris
[m[0;32;31m23:16:42|[libpdi] ERROR (PDI_irisCreate|646): PDI_irisInit err!
[m[0;32;31m23:16:42|[AEW] ERROR (Drv_aewIrisAdaptorCreate|44): PDI_irisCreate Failed!
[m[0;32;31m23:16:42|[AEW] ERROR (DRV_aeCreate|61): create iris handle failed,file: ../src/algae_adaptor/s3l/drv_aew_ae_adaptor.c func: DRV_aeCreate
[m[0;32;32m23:16:42|[AE] Eyebot AE Build on Feb 19 2020 at 04:04:03.
[m[0;32;32m23:16:42|[AE] SVN NUM: 56476.
[m[0;32;32m23:16:42|[AE] the cfg ver: 1.006
[m[0;32;32m23:16:42|[AE] the cfg date time is: 2020-02-19 12:04:06
[m[0;32;32m23:16:42|[AE] the cfg subVer is: 56476.000
[m[0;32;32m23:16:42|[AE] the cfg chipName is: s3l
[m[0;32;32m23:16:42|[AE] the cfg pdtName is: imx274
[m[0;32;32m23:16:42|[AE] OK, use cfg:/var/tmp/3A/ae_eyeBot_para.bin
[m[0;32;31m23:16:42|[OSA-APP] ERROR (OSA_fileOpen|216): Open failed
[m[0;32;31m23:16:42|[AE] ERROR (APP_commCfgReadCheckParam|89): Open /var/tmp/ae_eyeBot_lens_para.bin file failed
[m[0;32;32m23:16:42|[AE] APP_commCfgReadCheckParam /var/tmp/ae_eyeBot_lens_para.bin failed!
[m[0;32;32m23:16:42|[AE] APP_commCfgLoad /var/tmp/ae_eyeBot_lens_para.bin failed!
[m[0;32;31m23:16:42|[OSA-APP] ERROR (OSA_fileOpen|216): Open failed
[m[0;32;31m23:16:42|[AE] ERROR (APP_commCfgReadCheckParam|89): Open /var/tmp/0/ae_eyeBot_lens_para.bin file failed
[m[0;32;32m23:16:42|[AE] APP_commCfgReadCheckParam /var/tmp/0/ae_eyeBot_lens_para.bin failed!
[m[0;32;32m23:16:42|[pdc] Get motor cfg failed !
[m[0;32;32m23:16:42|[libpdi] pLensType = 5
[m[0;32;32m23:16:42|[AEW] lensType = 5, it's not Hall Lens
[m[0;32;32m23:16:42|[AE] PID DC IRIS Build on Feb 19 2020 at 04:04:04.
[m[0;32;32m23:16:42|[AE] SVN NUM: 56476.
[m[0;32;32m23:16:42|[AEW] aewb creat over
[m[0;35m23:16:42|[libvsf] Node VSF_Node_0x01010000 created
[m[0;32;32m23:16:42|[libvsf] VSF_aewInit
[m[0;35m23:16:42|[libvsf] Node VSF_Node_0x09010000 created
[m[0;32;32m23:16:42|[libvsf] LANG is not SimpChinese
[m[0;32;32m23:16:42|[libvsf] VSF_drvSysInit
[m[0;32;32m23:16:42|[libvsf] VSF_drvVinInit
[m[0;32;32m23:16:42|[libvsf] VSF_drvVoutInit
[m[0;32;32m23:16:42|[libvsf] VSF_drvEncInit
[m[0;32;32m23:16:42|[libvsf] VSF_drvStrmInit
[m[0;32;32m23:16:42|[libvsf] VSF_drvPmInit
[m[0;32;32m23:16:42|[libvsf] VSF_drvOsdInit
[m[0;32;32m23:16:42|[libvsf] VSF_drvYuvInit
[m[0;32;32m23:16:42|[libvsf] VSF_drvRoiInit
[m[0;32;32m23:16:42|[libvsf] i = 1 width 720 height 576
[m[0;32;32m23:16:42|[libvsf] nPrdtLineId = 2, nSensorId = 80, nHwVersionId = 0
[m[0;32;32m23:16:42|[libvsf] numStream: 3
[m[0;32;32m23:16:42|[libvsf] VIN channel0 create done
[m[0;32;32m23:16:42|[libvsf] start to enter idle
[mConnection established with kernel.
[0;32;32m23:16:42|[libvsf] VSF_drvEncGotoIdle done
[m[0;32;32m23:16:42|[libvsf]
Find Vin Source imx274 [m[0;32;32m23:16:42|[libvsf] it supports:
[m[0;32;32m23:16:42|[libvsf] 3840x2160P 30 RGB 12bits 16:9 AUTO rev[0]
[m[0;32;32m23:16:42|[libvsf] 3840x2160P 30 RGB 12bits 16:9 AUTO rev[0]
[m[0;32;32m23:16:42|[libvsf] 2688x1520P 30 RGB 12bits 16:9 AUTO rev[0]
[m[0;32;32m23:16:42|[libvsf] 1920x1080P 60 RGB 12bits 16:9 AUTO rev[0]
[m[0;35m23:16:42|[AmbaVideo] imx274->lane_num:6
[m[0;32;32m23:16:42|[libvsf] Active src 0's mode is:
[m[0;32;32m23:16:42|[libvsf] 3840x2160P 15 RGB 12bits 16:9 AUTO rev[0]
[m[0;32;32m23:16:42|[libvsf] init_vin done
[m[0;32;32m23:16:42|[libvsf] Buffer Resource Limit mode=0 [3840 2160] [704 576] [1280 720] [320 240]
[m[0;32;32m23:16:42|[libvsf] stream Resource Limit [3840 2160] [704 576] [1280 720] [3840 2160]
[m[0;32;32m23:16:42|[libvsf] mode = 0, rotate_enable = 0, iso_type = 2, debug_enable = 0, rawEn = 0
[m[0;32;DSP DRAM Used: 72 MB, Limited: 345 MB.
32m23:16:42|[libvsf] encode Set fmt type 1 width 3840 height 2160 source 0 id 0
[m[0;32;32m23:16:42|[libvsf] encode Set fmt type 1 width 704 height 576 source 1 id 1
[m[0;32;32m23:16:42|[libvsf] encode Set fmt type 1 width 1280 height 720 source 2 id 2
[m[0;32;32m23:16:42|[libvsf] encode Set fmt type 2 width 3840 height 2160 source 0 id 3
[m[0;32;32m23:16:42|[AEW] ../src/s3l/alg_mutualS3l.c::ALG_Mutual_Get_3A_LoopMode:493 LoopMode=1
[m[0;32;32m23:16:42|[AEW] get amba sensor id=12308
[m[0;32;32m23:16:42|[AEW] get amba vin_mode=43, vin_fpDSP DRAM Used: 231 MB, Limited: 345 MB.
s=34133333
[m[0;32;32m23:16:42|[AEW] get the product info: sensor id is 80, product type is 289.
[m[0;32;32m23:16:42|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;32;32m23:16:42|[libpdi] pIcrAewType = 2
[m[0;32;32m23:16:42|[AEW] File[../src/s3l/mw_sensor_param.c] Line[179], icrAewType=2
[m[0;32;32m23:16:42|[AEW] Global_GetMwSensorParam()->sensor_id is 80
wb_param is cfg_wb_bg_param!
[m[0;32;32m23:16:42|[AEW] lensType = 0
[m[0;32;32m23:16:42|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;32;32m23:16:42|[AEW] ====Global_GetWmSysRes()->isp_pipeline=2====
[m>>> pipline:2, hdr_mode:0, method:0, expo_num:1, raw_pitch:0
>>> main:size 3840x2160, raw:3840x2160, resolution:12
[0;32;32m23:16:42|[AEW] get amba sensor id=12308
[m[0;32;32m23:16:42|[AEW] get amba vin_mode=43, vin_fps=34133333
[m[0;32;32m23:16:42|[AEW] get the product info: sensor id is 80, product type is 289.
[m[0;32;32m23:16:42|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;32;32m23:16:42|[libpdi] pIcrAewType = 2
[m[0;32;32m23:16:42|[AEW] File[../src/s3l/mw_sensor_param.c] Line[179], icrAewType=2
[m[0;32;32m23:16:42|[AEW] Global_GetMwSensorParam()->sensor_id is 80
wb_param is cfg_wb_bg_param!
[m[0;32;32m23:16:42|[AEW] lensType = 0
[m[0;32;32m23:16:42|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;32;32m23:16:43|[AEW] ====Global_GetWmSysRes()->isp_pipeline=2====
[m>>> load_cc_bin_customer_loop:579 load cc binary done.
>>> enable_cc_customer_loop:532 enable cc binary done.
[0;32;32m23:16:43|[AEW] ../src/s3l/alg_mutualS3l.c::ALG_Mutual_Get_3A_LoopMode:493 LoopMode=1
[m>>> AAA start done!
[1;33m23:16:43|[libvsf] WARN (VSF_drvEncEnablePreview|1186): set lite store parame is fail
[m[0;32;32m23:16:43|[libvsf] enable preview done
[m[0;35m23:16:43|[OSA-APP] smartH26x_Tsk Task pid=320 tid=328
[m[0;32;32m23:16:43|[pdc] Get motor cfg failed !
[m[0;32;32m23:16:43|[libpdi] pLensType = 5
[m[0;35m23:16:43|[libvsf] streamId:0, old:0x0, fps:0, new:3840x2160,15
[m[0;35m23:16:43|[libvsf] vin:15,3840,2160, sensor:15,3840,2160
[m[0;32;32m23:16:43|[libvsf] start to enter idle
[m[0;32;32m23:16:43|[AEW] ../src/s3l/alg_mutualS3l.c::ALG_Mutual_Get_3A_LoopMode:493 LoopMode=1
[m>>> AAA stop done!
[0;32;32m23:16:43|[libvsf] VSF_drvEncGotoIdle done
[m[0;32;32m23:16:43|[libvsf] encode Set fmt type 1 width 3840 height 2160 source 0 id 0
[m[0;32;32m23:16:43|[libvsf] encode Set snap fmt type 2 width 3840 height 2160 source 0 id 3
[m[0;32;32m23:16:43|[AEW] ../src/s3l/alg_mutualS3l.c::ALG_Mutual_Get_3A_LoopMode:493 LoopMode=1
[m[0;32;32m23:16:43|[AEW] get amba sensor id=12308
[m[0;32;32m23:16:43|[AEW] get amba vin_mode=43, vin_fps=34133333
[m[0;32;32m23:16:43|[AEW] get the product info: sensor id is 80, product type is 289.
[m[0;32;32m23:16:43|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;32;32m23:16:43|[libpdi] pIcrAewType = 2
[m[0;32;32m23:16:43|[AEW] File[../src/s3l/mw_sensor_param.c] Line[179], icrAewType=2
[m[0;32;32m23:16:43|[AEW] Global_GetMwSensorParam()->sensor_id is 80
wb_param is cfg_wb_bg_param!
[m[0;32;32m23:16:43|[AEW] lensType = 0
[m[0;32;32m23:16:43|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;3DSP DRAM Used: 72 MB, Limited: 345 MB.
2;32m23:16:43|[AEW] ====Global_GetWmSysRes()->isp_pipeline=2====
[m>>> pipline:2, hdr_mode:0, method:0, expo_num:1, raw_pitch:0
>>> main:size 3840x2160, raw:3840x2160, resolution:12
[0;32;32m23:16:43|[AEW] get amba sensor id=12308
[m[0;32;32m23:16:43|[AEW] get amba vin_mode=43, vin_fps=34133333
[m[0;32;32m23:16:43|[AEW] get the product info: sensor id is 80, product type is 289.
[m[0;32;32m23:16:43|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;32;32m23:16:43|[libpdi] pIcrAewType = 2
[m[0;32;32m23:16:43|[AEWDSP DRAM Used: 231 MB, Limited: 345 MB.
] File[../src/s3l/mw_sensor_param.c] Line[179], icrAewType=2
[m[0;32;32m23:16:43|[AEW] Global_GetMwSensorParam()->sensor_id is 80
wb_param is cfg_wb_bg_param!
[m[0;32;32m23:16:43|[AEW] lensType = 0
[m[0;32;32m23:16:43|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;32;32m23:16:43|[AEW] ====Global_GetWmSysRes()->isp_pipeline=2====
[m>>> load_cc_bin_customer_loop:579 load cc binary done.
>>> enable_cc_customer_loop:532 enable cc binary done.
[0;32;32m23:16:43|[AEW] ../src/s3l/alg_mutualS3l.c::ALG_Mutual_Get_3A_LoopMode:493 LoopMode=1
[m>>> AAA start done!
[1;33m23:16:43|[libvsf] WARN (VSF_drvEncEnablePreview|1186): set lite store parame is fail
[m[0;32;32m23:16:43|[libvsf] enable preview done
[m[1;33m23:16:43|[libvsf] WARN (VSF_drvSmartEncSetH26xParam|2478): stream 0 smart encode is not enabled
[m[0;32;32m23:16:43|[libvsf] source buffer config: buffer 1, size 704x576, input 3840,2160 (0,0)
[m[0;32;32m23:16:43|[libvsf] encode Set fmt type 1 width 704 height 576 source 1 id 1
[m[0;32;32m23:16:43|[libvsf] source buffer config: buffer 2, size 1280x720, input 3840,2160 (0,0)
[m[0;32;32m23:16:43|[libvsf] encode Set fmt type 1 width 1280 height 720 source 2 id 2
[m[0;32;32m23:16:43|[libvsf] encode Set fmt type 2 width 3840 height 2160 source 0 id 3
[m[0;32;32m23:16:43|[libvsf] VSF_algEncInit
[m[0;32;32m23:16:43|[libvsf] overlay: offset = 0x8a00000, virt:0x714ee000, size = 0x200000
[m[0;35m23:16:43|[libvsf] OSD mem addr 0x714f2000, size 2080768; max OSD count 5; mem free ticks 15; osdMemReduce 0.dspSum 1,isMulChipOsd 0
[m[0;35m23:16:43|[OSA-APP] malgFree Task pid=320 tid=329
[m[0;32;32m23:16:43|[libvsf] Initializing OSD module done.
[m[0;32;32m23:16:43|[libvsf] stream_matrix_num = 2, single_matrix_size = 0x20000!
[m[0;35m23:16:43|[OSA-APP] roiTsk Task pid=320 tid=330
[m[0;32;32m23:16:43|[libvsf] VSF_algRoiInit
[m[0;32;32m23:16:43|[libvsf] VSF_algPmInit
[m[0;32;32m23:16:43|[libvsf] VSF_algDptzInit
[m[0;35m23:16:43|[libvsf] Packet phyaddr:0x8400000, virtaddr:0x6f4af000, size:0x600000
[m[1;33m23:16:43|[libvsf] WARN : not support appStrmId Id 3
[m[0;32;32m23:16:43|[libvsf] VSF_algPktInit
[m[0;35m23:16:43|[OSA-APP] heartB_Tsk Task pid=320 tid=333
[m[0;32;32m23:16:43|[libvsf] VSF_encInit
[m[0;35m23:16:43|[OSA-APP] debug Task pid=320 tid=335
[m[0;32;32m23:16:43|[libvsf] VSF_dbgInit
[m[0;32;32m23:16:44|[libvsf] isSupportVad 1
[m[0;32;32m23:16:44|[libvsf] yuvParam.intelliPoolNum 0
[m[0;35m23:16:44|[libvsf] Node VSF_Node_0x06010000 created
[m[0;32;32m23:16:44|[libvsf] VSF_dtcInit
[m[0;32;32m23:16:44|[libivf] IVF library(SVN:15738) Build on Apr 29 2020 at 16:02:02.
[m[0;32;32m23:16:44|[IVF-Drv] Process ['sonia':320] open IVF driver!
[m[0;32;32m23:16:44|[libivf] [Linux-USER][IVF_platResInit]dspGrade:0, dspSums:1
[m[0;32;32m23:16:44|[pdc] Get motor cfg failed !
[m[0;32;32m23:16:44|[libpdi] pLensType = 5
[m[0;32;32m23:16:44|[libiva] [ANLS_cfgGetChannelInfo] prodName IPC-HDW4830EM
[m[0;32;32m23:16:44|[libiva] [ANLS_cfgGetChannelInfo] prodName IPC-HDW4830EM
[m[0;35m23:16:44|[libivf] IVF_entryProces(0) Task pid=320 tid=337
[m[0;35m23:16:44|[libivf] IVF_entryProces(1) Task pid=320 tid=339
[m[0;35m23:16:44|[libivf] IVF_entryProces(3) Task pid=320 tid=340
[m[0;32;32m23:16:44|[libiva] [ANLS_cfgGetChannelInfo] prodName IPC-HDW4830EM
[m[0;32;32m23:16:44|[libiva] [ANLS_cfgGetChannelInfo] prodName IPC-HDW4830EM
[m[0;32;32m23:16:44|[libvsf] before ITS_intelliRemoteInit
[m[0;35m23:16:44|[libivf] IVF_nodeTskRun Task pid=320 tid=338
[m[0;32;32m23:16:44|[libdsp] RIS_intelliRemoteInit start !!!
[m[0;32;32m23:16:44|[libiva] [ANLS_cfgGetChannelInfo] prodName IPC-HDW4830EM
[m[0;32;32m23:16:44|[libdsp] RIS_intelliRemoteInit done !!!
[m[0;35m23:16:44|[libdsp] ITS_intelliCapRun(0) Task pid=320 tid=341
[m[0;35m23:16:44|[libdsp] ITS_intelliCapRun(1) Task pid=320 tid=342
[m[0;32;32m23:16:44|[libiva] [ANLS_cfgGetChannelInfo] prodName IPC-HDW4830EM
[m[0;32;32m23:16:44|[libiva] [ANLS_cfgGetChannelInfo] prodName IPC-HDW4830EM
[m[0;35m23:16:44|[libvsf] VSF_algIntelliTask Task pid=320 tid=344
[m[0;32;32m23:16:44|[libvsf] VSF_algIntelliInit
[m[0;32;34m23:16:44|[libvsf] VSF_intelliInit ~~~~~~~~~~~~~ 1786
[m[0;32;32m23:16:44|[libpdi] createVideoInput: channel(id) 0, channels: 1
[m[0;36m23:16:44|[libpdi] id:0 getConfig fun[1]: 0x18518b bnd: 0x0
[m[0;36m23:16:44|[libpdi] id:0 getConfig fun[1]: 0x1070200 bnd: 0x0
[m[0;36m23:16:44|[libpdi] getConfig fun[2]: 0x0
[m[0;36m23:16:44|[libpdi] getConfig fun[3]: 0x0
[m[0;36m23:16:44|[libpdi] bndFlag: 0x3
[m[1;33m23:16:44|[DH_Binder] WARN : Two port 0x1402aa8 - 0x1402aa4 on the same process !
[m[1;33m23:16:44|[DH_Binder] WARN : Two port 0x1402aa9 - 0x1402aa2 on the same process !
[m[0;32;32m23:16:44|[libvsf] VSF_intelliInit
[m[0;32;32m23:16:44|[libvsf] VSF_init fastEnable[0]
[m[0;32;32m23:16:44|[AEW] begin start aewb, SVN NUM=62486, build in Jul 25 2019 09:48:55......
[m>>> ======= [DONE] mw_start_aaa =======
[0;32;32m23:16:44|[AEW] amba mw aaa is started ok.
[m[0;32;32m23:16:44|[AEW] start amba mw is OK
[m[0;32;32m23:16:44|[AEW] adj_set_freeze_enable 0
[m[0;32;32m23:16:44|[AEW] ALG_aewStart:standard=0
[m[0;32;32m23:16:44|[AEW] encWidth = 3840,encHeight = 2160,realWidth = 3840,realHeight = 2160,n_x=0,n_y=0,n_r=0
[m[0;32;32m23:16:44|[AEW] ******************aeTagRatio=100, productType=289******************
[m[0;32;32m23:16:44|[pdc] Get motor cfg failed !
[m[0;32;32m23:16:44|[libpdi] pLensType = 5
[m[0;32;32m23:16:44|[AEW] ../src/alg_ldc.c::ALG_getLDCParam:552 there is no suitable param for lensType:5, sensorID:80
[m[0;32;31m23:16:44|[libpdi] ERROR (PDI_irisInit|272): Can't open /dev/pdcIris
[m[0;32;31m23:16:44|[libpdi] ERROR (PDI_irisCreate|646): PDI_irisInit err!
[mcreate iris handle failed
open_pwm_proc error
: No such file or directory
!!! [src/mw_image.c: 1050]dc_iris_enable error
[0;35m23:16:44|[libdsp] ITS_intelliCapRun(3) Task pid=320 tid=343
[m[0;32;32m23:16:44|[libiva] [ANLS_cfgGetChannelInfo] prodName IPC-HDW4830EM
[m[0;32;32m23:16:44|[libvsf] isLongExp:0, expFps=25
[m[0;32;32m23:16:44|[libvsf] VSF_COM_SET_LONG_EXP
[m[1;33m23:16:44|[libvsf] VSF_drvEncAdjustByLongExp isLongExp:0, expFps:25
[m[0;32;31m23:16:44|[AEW] ERROR (Drv_aewIrisAdaptorAdjustSize|131): hIris is NULL!
[m[0;32;31m23:16:44|[AEW] ALG_awbReset:pa_wb_gain->r=1.500000,pa_wb_gain->b=1.500000
[mALG_awbReset:currWbGain.r_gain=1536,currWbGain.b_gain=1536
[0;32;32m23:16:44|[libpdi] smartIr Type:1
[m[0;32;32m23:16:44|[AE] ledCount:1
[m[0;32;32m23:16:44|[AE] IR-is~ok~!!!!!!!!!!!-Enable OK,i_count=0,i_ircount=1
[m[0;32;32m23:16:44|[AE] aewWLCheck-ledCount=1,ledType=1,
[m[0;32;32m23:16:44|[AE] Set SD/IPC LIGHT_TYPE[1] DutyRation: 0, Frequence:50000
[m[0;32;32m23:16:44|[AE] SMARTIR:the state is inited to closed!
[m[0;32;32m23:16:44|[pdc] Get motor cfg failed !
[m[0;32;32m23:16:44|[libpdi] pLensType = 5
[m[0;32;32m23:16:44|[AEW] File[../src/alg_isp.c],Line[237] lensType=5
[m[0;32;32m23:16:44|[AEW] File[../src/alg_isp.c],Line[245] funcValue=0
[m[0;32;32m23:16:44|[AEW] File[../src/alg_isp.c],Line[246] funcLscFlag=0 ,funcGrGbFlag=0
[m[0;32;32m23:16:44|[AEW] pa_lensTypePara->grgbmismatchCorrEn = 0
[m[0;32;32m23:16:44|[AEW] restart aew time normal =100 ms
[m[0;32;32m23:16:44|[libvsf] VSF_dtcStart
[m[0;32;32m23:16:44|[libvsf] VSF_start
[mStart videoDaemon ok
[0;32;32m23:16:44|[libvsf] Detection execute cmd:0x8
[m[0;32;32m23:16:44|[AEW] start AEW is OK ......
[m[0;32;32m23:16:44|[libpdi] getPtzType
[m[0;32;32m23:16:44|[AEW] currWdrType=0,currAeFlag=8
[m[0;35m23:16:44|[libvsf] wdrType:0
[m[0;32;32m23:16:44|[AEW] OpSetWdr set wdr type to : 0
[m[0;32;32m23:16:44|[libvsf] VSF_COM_SET_WDR_TYPE
[m[0;35m23:16:44|[AEW] ALG_CustomerLoopThread Task pid=320 tid=345
[m[0;35m23:16:44|[AEW] ALG_AutoIRThread Task pid=320 tid=346
[m[0;32;32m23:16:44|[libvsf] isLongExp:0, expFps=15
[m[0;32;32m23:16:44|[libvsf] VSF_COM_SET_LONG_EXP
[m[1;33m23:16:44|[libvsf] VSF_drvEncAdjustByLongExp isLongExp:0, expFps:15
[m[0;32;31m23:16:44|[AEW] ERROR (Drv_aewIrisAdaptorAdjustSize|131): hIris is NULL!
[m[0;35m23:16:44|[AE] ALG_AutoExposeThread Task pid=320 tid=348
[m[0;32;31m23:16:44|[AEW] ERROR (Drv_aewIrisAdaptorAdjustSize|131): hIris is NULL!
[m[0;32;31m23:16:44|[AEW] ERROR (Drv_aewIrisAdaptorAdjustSize|131): hIris is NULL!
[m[0;32;32m23:16:44|[AE] ALG_aewLightCtrMutexMap-lightsCtrlNoMutex=0,ctrlMode=3
[m[0;32;32m23:16:44|[AE] ALG_aewSmartWLIrModeMap-IrWLMode[0]=3,Mode[1]=3,lamp0=0,lamp1=0
[m[0;32;32m23:16:44|[AE] manual-ratio-IR-near=0,middle=0,far=0,WL=[0-0-0],correction0~1=[0-0]
[m[0;32;32m23:16:44|[AEW_DRV] OpStopDtc Called.
[m[0;32;32m23:16:44|[AEW_DRV] setDayNightColor Called. dncMode:0
[m[0;32;32m23:16:44|[ICR] setColor: tagDncMode:0, irCutStatus:1, colorDelayFrames:2,
[m[0;32;32m23:16:44|[ICR] setColor: tagDncMode:0, irCutStatus:1, colorDelayFrames:1,
[m[0;32;32m23:16:44|[ICR] setColor: tagDncMode:0, irCutStatus:1, colorDelayFrames:0,
[m[0;32;32m23:16:44|[ICR] setColor: tagDncMode:0, irCutStatus:3, colorDelayFrames:0,
[m[0;32;32m23:16:44|[pdc] ....turn into NIGHT mode....
[m[0;32;32m23:16:44|[libvsf] Detection execute cmd:0x8
[m[0;32;32m23:16:44|[ICR] setFilter: driver:1, icrFilterType:0, icrCutMode:1
[m[0;32;32m23:16:44|[ICR] setFilter: tagDncMode:0, irCutStatus:0, filterDelayFrames:0
[m[0;32;32m23:16:44|[ICR] ICR:the state is inited to color icr!
[m[0;32;31m23:16:44|[ICR] ERROR (ALG_icrAppSet|1000): The c2bSensitivityLevel =0 does not suppourted, use Mid Sensitivity!
[m[0;32;32m23:16:44|[ICR] sensitiveType=0,web c2bSensitivityLevel=0
[m[0;32;32m23:16:44|[ICR] c2bThrRatio =1.0000,c2bInterIndexMin=0,c2bInterIndexMax=1
[m[0;32;32m23:16:44|[ICR] b2cThrRatio =1.0000,b2cInterIndexMin=0,b2cInterIndexMax=1
[m[1;33m23:16:44|[ICR] WARN (ALG_icrAppSet|1073): ByGain: the param of day night cut is unsuitable
[m[0;32;32m23:16:44|[ICR] EvRatio=1.0000, EvRatioHdr=1.0000, aeTagRatio=1.0000, priorCutMethod=0
[m[0;32;32m23:16:44|[ICR] ByEv: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50
[m[0;32;32m23:16:44|[ICR] ByGain: c2bGainThr=0.0000, b2cGainThr=0.0000
[m[0;32;32m23:16:44|[ICR] ByHardware: c2bAdcThr=10000000, b2cAdcThr=2a000000
[m[0;32;32m23:16:44|[ICR] ByLum: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50, isIrThr=0.2500, maxIrRatio=0.1700,b2cLumRatio=0.7500
[m[0;32;32m23:16:44|[ICR] ByVolt: c2bEvThr=85, b2cEvThr=0, minc2bEvThr=10, minb2cEvThr=50, c2bVoltThr=10000000, b2cVoltThr=2a000000
[m[0;32;32m23:16:44|[ICR] ByVLE: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50, irRGain=270, irBGain=273, maxIrRatio=0.8400,b2cLumRatio=0.7500
[m[0;32;32m23:16:44|[AEW] set awb mode is OK...
[m[0;32;32m23:16:44|[AEW] pa_algColor->contrast = 50, pa_autoClrPara->crtLevel = [50, 50],
pa_algColor->saturation = 50, pa_autoClrPara->satLevel = [50, 50],
pa_algColor->brightness = 50, pa_autoClrPara->brtLevel = [50, 50],
pa_algColor->gamLevel = 50, pa_autoClrPara->gamLevel = [50, 50],
, senGain:0.000,pa_autoClrPara->minSenGain:24.000,pa_autoClrPara->maxSenGain:30.000,
[m[0;32;31m23:16:44|[AEW] Global_GetHdrPipeLine=0, lastHdrPipeLine=255
[m[0;32;32m23:16:44|[AEW] change tone
[m[0;32;32m23:16:44|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=0
[m[0;32;32m23:16:44|[AEW] Set cfa£¬sc...adj params to 1 OK!
[m[0;32;32m23:16:44|[AEW] set adj prarms is OK...
[m[0;32;32m23:16:44|[AEW] set static bpc calibration OK...
[m[0;32;32m23:16:44|[AEW] set night color mode is OK...
[m[0;32;31m23:16:44|[AEW] saturation=40,pa_algColor->saturation=50
[m[0;32;32m23:16:44|[AEW] curr sat level =40
[m[0;32;32m23:16:44|[AEW] get curvParam is error...
[m[0;32;32m23:16:44|[AEW] curr gam level =50
[m[0;32;32m23:16:44|[AEW] shparEnb: 1,sharp_ratio: 1.200000,sharp_level: 50
[m[0;32;32m23:16:44|[AEW] set sharpness & 2dnr is OK...
[m[0;32;32m23:16:44|[AEW] mwMctfLevel =6, ktnfLevel =50
[m[0;32;32m23:16:44|[AEW] ktnf enable=1
[m[0;32;32m23:16:44|[AEW] set ktnf is OK...
[m[0;32;32m23:16:44|[AEW] set vd rotate is OK...
[m[0;32;32m23:16:44|[AEW] set vstd is OK...
[m[0;32;32m23:16:44|[AEW] set 3D.bin is OK && currGammaTable = 0
[m[0;32;32m23:16:44|[AEW] currWdrType=0,currAeFlag=8
[m[0;35m23:16:44|[libvsf] wdrType:0
[m[0;32;32m23:16:44|[AEW] OpSetWdr set wdr type to : 0
[m[0;32;32m23:16:44|[libvsf] VSF_COM_FLIP_ROTATE
[m[0;32;32m23:16:44|[libvsf] same view
[m[0;32;32m23:16:44|[libvsf] set pView 0 0 0
[m[0;32;32m23:16:44|[libvsf] set Dtc pView 0 0 0
[m[0;32;32m23:16:44|[libvsf] VSF_COM_SET_WDR_TYPE
[m[0;32;31m23:16:44|[ICR] ERROR (ALG_icrAppSet|1000): The c2bSensitivityLevel =0 does not suppourted, use Mid Sensitivity!
[m[0;32;32m23:16:44|[ICR] sensitiveType=0,web c2bSensitivityLevel=0
[m[0;32;32m23:16:44|[ICR] c2bThrRatio =1.0000,c2bInterIndexMin=0,c2bInterIndexMax=1
[m[0;32;32m23:16:44|[ICR] b2cThrRatio =1.0000,b2cInterIndexMin=0,b2cInterIndexMax=1
[m[1;33m23:16:44|[ICR] WARN (ALG_icrAppSet|1073): ByGain: the param of day night cut is unsuitable
[m[0;32;32m23:16:44|[ICR] EvRatio=1.0000, EvRatioHdr=1.0000, aeTagRatio=1.0000, priorCutMethod=0
[m[0;32;32m23:16:44|[ICR] ByEv: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50
[m[0;32;32m23:16:44|[ICR] ByGain: c2bGainThr=0.0000, b2cGainThr=0.0000
[m[0;32;32m23:16:44|[ICR] ByHardware: c2bAdcThr=10000000, b2cAdcThr=2a000000
[m[0;32;32m23:16:44|[ICR] ByLum: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50, isIrThr=0.2500, maxIrRatio=0.1700,b2cLumRatio=0.7500
[m[0;32;32m23:16:44|[ICR] ByVolt: c2bEvThr=85, b2cEvThr=0, minc2bEvThr=10, minb2cEvThr=50, c2bVoltThr=10000000, b2cVoltThr=2a000000
[m[0;32;32m23:16:44|[ICR] ByVLE: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50, irRGain=270, irBGain=273, maxIrRatio=0.8400,b2cLumRatio=0.7500
[m[0;32;32m23:16:44|[ICR] state is changed to real:0, web:0
[m[0;32;32m23:16:44|[AEW_DRV] OpStopDtc Called.
[m[0;32;32m23:16:44|[ICR] nSensorId=80, icrCutMethod=0
[m[0;32;32m23:16:44|[AEW_DRV] setDayNightColor Called. dncMode:0
[m[0;32;32m23:16:44|[ICR] setColor: tagDncMode:0, irCutStatus:1, colorDelayFrames:2,
[m[0;32;32m23:16:44|[AEW] Global_GetMwSensorParam()->vin_aaa_info.hdr_mode:0,hdr_expo_num:1
[m[0;32;32m23:16:44|[AEW] get from amba_img AeGain =1.0000, GlobalDGain =1.0000
[m[0;32;32m23:16:44|[AEW] curr WB Gain from amba_img =[1.3857 1.0000 2.0156]
[m[0;32;32m23:16:44|[AEW] get WB Gain [R B]=[1.3857 2.0156]
[m[0;32;32m23:16:44|[AEW] set awb mode is OK...
[m[0;32;32m23:16:44|[AEW] change tone
[m[0;32;32m23:16:44|[AEW] ../src/s3l/mw_sensor_param.c::chooseCurParam:80 curParamType=1
[m[0;32;32m23:16:44|[AEW] Set cfa£¬sc...adj params to 0 OK!
[m[0;32;32m23:16:44|[AEW] set adj prarms is OK...
[m[0;32;32m23:16:44|[AEW] set night color mode is OK...
[m[0;32;31m23:16:44|[AEW] saturation=50,pa_algColor->saturation=50
[m[0;32;32m23:16:44|[AEW] curr sat level =50
[m[0;32;32m23:16:44|[AEW] get curvParam is error...
[m[0;32;32m23:16:44|[AEW] curr gam level =50
[m[0;32;32m23:16:44|[AEW] shparEnb: 1,sharp_ratio: 1.200000,sharp_level: 50
[m[0;32;32m23:16:44|[AEW] set sharpness & 2dnr is OK...
[m[0;32;32m23:16:44|[AEW] set 3D.bin is OK && currGammaTable = 2
[m[0;32;32m23:16:44|[AEW] currWdrType=0,currAeFlag=8
[m[0;35m23:16:44|[libvsf] wdrType:0
[m[0;32;32m23:16:44|[AEW] OpSetWdr set wdr type to : 0
[m[0;32;31m23:16:44|[ICR] ERROR (ALG_icrAppSet|1000): The c2bSensitivityLevel =0 does not suppourted, use Mid Sensitivity!
[m[0;32;32m23:16:44|[libvsf] VSF_COM_SET_WDR_TYPE
[m[0;32;32m23:16:45|[ICR] sensitiveType=0,web c2bSensitivityLevel=0
[m[0;32;32m23:16:45|[ICR] c2bThrRatio =1.0000,c2bInterIndexMin=0,c2bInterIndexMax=1
[m[0;32;32m23:16:45|[ICR] b2cThrRatio =1.0000,b2cInterIndexMin=0,b2cInterIndexMax=1
[m[1;33m23:16:45|[ICR] WARN (ALG_icrAppSet|1073): ByGain: the param of day night cut is unsuitable
[m[0;32;32m23:16:45|[ICR] EvRatio=1.0000, EvRatioHdr=1.0000, aeTagRatio=1.0000, priorCutMethod=0
[m[0;32;32m23:16:45|[ICR] ByEv: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50
[m[0;32;32m23:16:45|[ICR] ByGain: c2bGainThr=0.0000, b2cGainThr=0.0000
[m[0;32;32m23:16:45|[ICR] ByHardware: c2bAdcThr=10000000, b2cAdcThr=2a000000
[m[0;32;32m23:16:45|[ICR] ByLum: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50, isIrThr=0.2500, maxIrRatio=0.1700,b2cLumRatio=0.7500
[m[0;32;32m23:16:45|[ICR] ByVolt: c2bEvThr=85, b2cEvThr=0, minc2bEvThr=10, minb2cEvThr=50, c2bVoltThr=10000000, b2cVoltThr=2a000000
[m[0;32;32m23:16:45|[ICR] ByVLE: c2bEvThr=60, b2cEvThr=0, minc2bEvThr=25, minb2cEvThr=50, irRGain=270, irBGain=273, maxIrRatio=0.8400,b2cLumRatio=0.7500
[m[0;32;32m23:16:45|[ICR] setColor: tagDncMode:0, irCutStatus:1, colorDelayFrames:1,
[m[0;32;32m23:16:45|[AEW] set awb mode is OK...
[m[0;32;31m23:16:45|[AEW] saturation=50,pa_algColor->saturation=50
[m[0;32;32m23:16:45|[AEW] curr sat level =50
[m[0;32;32m23:16:45|[AEW] get curvParam is error...
[m[0;32;32m23:16:45|[AEW] curr gam level =50
[m[0;32;32m23:16:45|[AEW] shparEnb: 1,sharp_ratio: 1.200000,sharp_level: 50
[m[0;32;32m23:16:45|[AEW] set sharpness & 2dnr is OK...
[m[0;32;32m23:16:45|[ICR] setColor: tagDncMode:0, irCutStatus:1, colorDelayFrames:0,
[m[0;32;32m23:16:45|[AEW] set awb mode is OK...
[m[0;32;31m23:16:45|[AEW] saturation=50,pa_algColor->saturation=50
[m[0;32;32m23:16:45|[AEW] curr sat level =50
[m[0;32;32m23:16:45|[AEW] brt = 50, sat = 50, hue = 50, crt = 50
[m[0;32;32m23:16:45|[libvsf] Detection execute cmd:0x8
[m[0;32;32m23:16:45|[ICR] setColor: tagDncMode:0, irCutStatus:3, colorDelayFrames:0,
[m[0;32;32m23:16:45|[pdc] ....turn into NIGHT mode....
[m[0;32;32m23:16:45|[ICR] setFilter: driver:1, icrFilterType:0, icrCutMode:1
[m[0;32;32m23:16:45|[ICR] setFilter: tagDncMode:0, irCutStatus:0, filterDelayFrames:0
[m[0;32;32m23:16:45|[AEW] set awb mode is OK...
[m[0;32;32m23:16:45|[AEW] set awb mode is OK...
[m[0;32;32m23:16:45|[AEW] pa_algColor->contrast = 50, pa_autoClrPara->crtLevel = [50, 50],
pa_algColor->saturation = 50, pa_autoClrPara->satLevel = [50, 50],
pa_algColor->brightness = 50, pa_autoClrPara->brtLevel = [50, 50],
pa_algColor->gamLevel = 50, pa_autoClrPara->gamLevel = [50, 50],
, senGain:4.031,pa_autoClrPara->minSenGain:24.000,pa_autoClrPara->maxSenGain:30.000,
[m[0;32;32m23:16:46|[AEW] pa_algColor->contrast = 50, pa_autoClrPara->crtLevel = [50, 50],
pa_algColor->saturation = 50, pa_autoClrPara->satLevel = [50, 50],
pa_algColor->brightness = 50, pa_autoClrPara->brtLevel = [50, 50],
pa_algColor->gamLevel = 50, pa_autoClrPara->gamLevel = [50, 50],
, senGain:5.824,pa_autoClrPara->minSenGain:24.000,pa_autoClrPara->maxSenGain:30.000,
[m[0;32;32m23:16:46|[AEW] set night color mode is OK...
[m[37;40m[23:16:47 trace Unknown 320 Unknown:0]main( /usr/bin/sonia AEWB DSP EX2)
[0m[32;40m[23:16:47 info Unknown 320 Unknown:0]Pack Environment
URL: http://yfsvn.dahuatech.com/svnpl/Renascence/Projects/HDCameraS2L/Branches/P_2019.06.17_Project_HDCameraS2L_TLS1.3 @ 887241M
[0m[37;40m[23:16:47 trace Unknown 320 Unknown:0]******************app lib info******************
[0m[32;40m[23:16:47 info Infra 320 Unknown:0][*] Function 1.1.0.682039 Built in 2020/ 2/19 [*]
[0m[32;40m[23:16:47 info Infra 320 Unknown:0][*] Manager 1.1.0.799761 Built in 2020/ 2/19 [*]
[0m[32;40m[23:16:47 info Infra 320 Unknown:0][*] NetApp 3.0.0.660628 Built in 2020/ 2/19 [*]
[0m[32;40m[23:16:47 info Infra 320 Unknown:0][*] Storage 1.0.1.665788 Built in 2020/ 2/19 [*]
[0m[32;40m[23:16:47 info Infra 320 Unknown:0][*] Function 1.1.0.682039 Built in 2020/ 2/19 [*]
[0m[37;40m[23:16:47 trace Unknown 320 Unknown:0]******************app lib info******************
[0m|23:16:47|[StreamApp@660460][StreamApp.cpp:18]|INFO [StreamAppComponent] initStreamAppServerComponent
|23:16:47|[StreamApp@660460][InitStreamAppComponentLibrary.cpp:40]|INFO [StreamAppComponent] register all Component
|23:16:47|[StreamApp@660460][StreamApp.cpp:18]|INFO [StreamAppComponent] initStreamAppServerComponent
|23:16:47|[StreamApp@660460][DHEncrypt.cpp:11]|INFO [StreamAppComponent] initStreamAppPrivateFrameEncryptComponent
|23:16:47|[StreamApp@660460][RtspRealStream.cpp:36]|INFO [StreamAppComponent] initStreamAppRtspStreamSourceComponent
real stream factory, Src/Rtsp/Client/RtspRealStream.h:190, iid=StreamSource
|23:16:47|[StreamApp@660460][QuickMulticast.cpp:17]|INFO [StreamAppComponent] initStreamAppQuickMulticastComponent
|23:16:47|[StreamApp@660460][TalkbackClient.cpp:15]|INFO [StreamAppComponent] initStreamAppHttpTalkClientComponent
|23:16:47|[StreamApp@660460][TsMulticastService.cpp:10]|INFO [StreamAppComponent] initStreamAppTsMulticastServiceComponent
|23:16:47|[StreamApp@660460][UdpMulticastService.cpp:7]|INFO [StreamAppComponent] initStreamAppUdpMulticastServiceComponent
|23:16:47|[StreamApp@660460][TalkbackSvr.cpp:22]|INFO [StreamAppComponent] initStreamAppHttpTalkbackSvrComponent
|23:16:47|[StreamSvr@660470][TransformatBase.cpp:9]|INFO [StreamAppComponent] initStreamSvrParseCreaterComponent
|23:16:47|[StreamApp@660460][MikeyAdapter.cpp:21]|INFO [StreamAppComponent] initStreamAppDHEncryptClientComponent
|23:16:47|[StreamApp@660460][SslSvr.cpp:9]|INFO [StreamAppComponent] initStreamAppSSlSvrComponent
|23:16:47|[StreamApp@660460][RtmpSvr.cpp:9]|INFO [StreamAppComponent] initStreamAppRtmpServerComponent
|23:16:47|[StreamApp@660460][StreamUrlService.cpp:8]|INFO [StreamAppComponent] initStreamUrlServiceComponent
|23:16:47|[StreamApp@660460][QuickMulticast.cpp:17]|INFO [StreamAppComponent] initStreamAppQuickMulticastComponent
|23:16:47|[StreamApp@660460][TsMulticastService.cpp:10]|INFO [StreamAppComponent] initStreamAppTsMulticastServiceComponent
|23:16:47|[StreamApp@660460][TalkbackSvr.cpp:22]|INFO [StreamAppComponent] initStreamAppHttpTalkbackSvrComponent
|23:16:47|[StreamSvr@660470][TransformatBase.cpp:9]|INFO [StreamAppComponent] initStreamSvrParseCreaterComponent
|23:16:47|[StreamApp@660460][RtspWebsocketSession.cpp:12]|INFO [StreamAppComponent] initStreamAppRtspWebSocketComponent
|23:16:47|[StreamApp@660460][RtmpPushClientImpl.cpp:11]|INFO [StreamAppComponent] initStreamAppRtmpPushClientComponent
|23:16:47|[StreamApp@660460][DHEncrypt.cpp:11]|INFO [StreamAppComponent] initStreamAppPrivateFrameEncryptComponent
ethNum = 1
[37;40m[23:16:47 trace NetProt-639927M 320 Unknown:0][tid:0320] initNetProtocolArpComponentLibrary! [Src/arp.cpp:38]
[0m[37;40m[23:16:47 trace NetProt-639927M 320 Unknown:0][tid:0320] initNetProtocolArpComponentLibrary! [Src/arp.cpp:38]
[0m[37;40m[23:16:47 trace NetProt-639927M 320 Unknown:0][tid:0320] initNetProtocolIpv6ConflictCheckNewComponentLibrary! [Src/IPv6ConflictCheckNew.cpp:1045]
[0minitOnvifMetaStreamComponentLibrary called!
i called
Storage this = 0x13a1cb0
i called
109 I register FileManager Factory in storage clsid=Local ret=1
[37;40m[23:16:47 trace libStoragePosix 320 UserConfig.cpp:30]insight@CUserConfig setConfig table:{
"EventsMap" : {
"AlarmLocal" : "A",
"Card" : "C",
"Manual" : "F",
"Marked" : "K",
"Timing" : "R"
}
}
[0m[37;40m[23:16:47 trace Manager 320 Unknown:0]CConsole::registerCmd had been register!!
[0m[37;40m[23:16:47 trace Infra 320 Unknown:0]CThreadManager::CThreadManager()>>>>>>>>>
[0;32;32m23:16:47|[pdc] pCbparams->OpSetBeep = null
[m[0;32;32m23:16:47|[libpdi] pWrapper->beep = NULL
[m[0;32;32m23:16:47|[libpdi] >-------System3_getSystemInfo------->
[m[0mFail to get env dvname!
Fail to get env devOEM!
Fail to get env authcode!
[0;32;32m23:16:47|[libpdi] Get authcode error
[mFail to get env productDate!
[0;32;32m23:16:47|[libpdi] cameraID: 4B01737PAQ01099
[m[0;36m23:16:47|[libpdi] SeriNumBuf = ND011803008704
[mFail to get env peripheral!
[0;32;31m23:16:47|[libpdi] ERROR (PDI_fingerInit|335): Can't open /dev/pdcFinger
[m[0;32;32m23:16:47|[libpdi] deviceChannel[0]: IPC
[m[0;32;32m23:16:47|[libpdi] deviceType: N253EA8
[m[0;32;32m23:16:47|[libpdi] processorType: 33
[m[0;32;32m23:16:47|[libpdi] hardwareVersion: 1.00
[m[0;32;32m23:16:47|[libpdi] appAutoStart: 1
[m[0;32;32m23:16:47|[libpdi] serialNumber: ND011803008704
[m[0;32;32m23:16:47|[libpdi] deviceClass: IPC
[m[0;32;32m23:16:47|[libpdi] noPtz: 1
[m[0;32;32m23:16:47|[libpdi] noSdCard: 0
[m[0;32;32m23:16:47|[libpdi] noRTC: 0
[m[0;32;32m23:16:47|[libpdi] bandWidth: 80
[m[0;32;32m23:16:47|[libpdi] channelNum: 1
[m[0;32;32m23:16:47|[libpdi] fingerPrintCnt 0
[m[0;32;32m23:16:47|[libpdi] frontFaceRecognition 0
[m[0;32;32m23:16:47|[libpdi] <-------System3_getSystemInfo-------<
[m[37;40m[23:16:48 trace SecurityUnit-746138M 320 CipherManager.cpp:45]the input num:3.
[0m[37;40m[23:16:48 trace Infra:791859M 349 Thread.cpp:115]ThreadBody Enter name:MemoryUsage, id:349, prior:N64, stack:0x3aa33c44
[0m***************************************************
Program Build at :Apr 30 2020 07:15:29
***************************************************
[32;40m[23:16:48 info NetFramework:716529M 320 Debug.cpp:44]-------------------------------------------------------------------------------
[0m[32;40m[23:16:48 info NetFramework:716529M 320 Debug.cpp:45]- NetFrameWork Build:2020-02-19-12:01:11, Version:716529M -
[0m[32;40m[23:16:48 info NetFramework:716529M 320 Debug.cpp:46]-------------------------------------------------------------------------------
[0m[37;40m[23:16:48 trace Infra:791859M 352 Thread.cpp:115]ThreadBody Enter name:NetFramework0 daemon, id:352, prior:N64, stack:0x39233c44
[0m[31;40m[23:16:48 error NetFramework:716529M 352 ThreadPool.cpp:230][Src/Core/ThreadPool.cpp:230] tid:352, InitConsoleDebug ok! run happy.
[0m[37;40m[23:16:48 trace Infra:791859M 353 Thread.cpp:115]ThreadBody Enter name:NetFramework0, id:353, prior:N64, stack:0x38a33c44
[0m[37;40m[23:16:48 trace Infra:791859M 354 Thread.cpp:115]ThreadBody Enter name:NetFramework0, id:354, prior:N64, stack:0x38233c44
[0m[37;40m[23:16:48 trace Infra:791859M 351 Thread.cpp:115]ThreadBody Enter name:Timer_Thread, id:351, prior:N64, stack:0x39a33c44
[0m[37;40m[23:16:48 trace Infra:791859M 355 Thread.cpp:115]ThreadBody Enter name:NetFramework0, id:355, prior:N64, stack:0x37a33c44
[0m[37;40m[23:16:48 trace Infra:791859M 356 Thread.cpp:115]ThreadBody Enter name:NetFramework0, id:356, prior:N64, stack:0x37233c44
[0m[37;40m[23:16:48 trace Infra:791859M 350 Thread.cpp:115]ThreadBody Enter name:Sock_Timer_Thread, id:350, prior:N64, stack:0x3a233c44
[0m[32;40m[23:16:48 info NetFramework:716529M 320 NetThread.cpp:92][Src/Core/NetThread.cpp:92] tid:320, Create NetFramework thread pool success!
[0m[37;40m[23:16:48 trace Infra:791859M 357 Thread.cpp:115]ThreadBody Enter name:RedirServer, id:357, prior:N64, stack:0x36a33c44
[0m[32;40m[23:16:48 info Unknown 320 Unknown:0]CPacketManager: malloc total:26214400 pagesize:1024blockCount:25600 ManagermentSize:512300
[0m[32;40m[23:16:48 info Unknown 320 Unknown:0]AddrRange:0x34934400/0x36234400)
[0m[31;40m[23:16:48 error Manager 320 CommonConfigManager.cpp:1554]CCommonConfigManager::readFileSec /var/tmp/pd/CustomConfig is not exist!
[0m[33;40m[23:16:48 warn Manager 320 CommonConfigManager.cpp:255]CCommonConfigManager::CCommonConfigManager() read customConfig file failed.
[0m[31;40m[23:16:48 error Manager 320 CommonConfigManager.cpp:1554]CCommonConfigManager::readFileSec /var/tmp/pd/CustomPathSensitive is not exist!
[0m[31;40m[23:16:48 error Manager 320 CommonConfigManager.cpp:263]CCommonConfigManager::CCommonConfigManager() read customConfigEncrypt file failed.
[0m[37;40m[23:16:48 trace Manager 320 CommonConfigManager.cpp:1505]tracepoint:
[0m[33;40m[23:16:48 warn Manager 320 CommonConfigManager.cpp:274]CCommonConfigManager::CCommonConfigManager() read sensitive config file failed.
[0m[33;40m[23:16:48 warn Manager 320 FileLog.cpp:175]CFileLog::config,get logs from file(/mnt/mtd/Log/log0.zip) failed
[0m[31;40m[23:16:48 error Manager 320 FileLog.cpp:178]CFileLog::config,get logs from bak file(/mnt/mtd/Log/logbackup0.zip) failed
[0;32;32m23:16:48|[libpdi] >-------System3_getSystemInfo------->
[m[0mFail to get env dvname!
Fail to get env devOEM!
Fail to get env authcode!
[0;32;32m23:16:48|[libpdi] Get authcode error
[mFail to get env productDate!
[0;32;32m23:16:48|[libpdi] cameraID: [0;32;32m23:16:48|[prc] Set WdtTimeout To WdtTimeoutMax:47721, instead !
[m 4B01737PAQ01099
[m[0;36m23:16:48|[libpdi] SeriNumBuf = ND011803008704
[mFail to get env peripheral!
[0;32;31m23:16:48|[libpdi] ERROR (PDI_fingerInit|335): Can't open /dev/pdcFinger
[m[0;32;32m23:16:48|[libpdi] deviceChannel[0]: IPC
[m[0;32;32m23:16:48|[libpdi] deviceType: N253EA8
[m[0;32;32m23:16:48|[libpdi] processorType: 33
[m[0;32;32m23:16:48|[libpdi] hardwareVersion: 1.00
[m[0;32;32m23:16:48|[libpdi] appAutoStart: 1
[m[0;32;32m23:16:48|[libpdi] serialNumber: ND011803008704
[m[0;32;32m23:16:48|[libpdi] deviceClass: IPC
[m[0;32;32m23:16:48|[libpdi] noPtz: 1
[m[0;32;32m23:16:48|[libpdi] noSdCard: 0
[m[0;32;32m23:16:48|[libpdi] noRTC: 0
[m[0;32;32m23:16:48|[libpdi] bandWidth: 80
[m[0;32;32m23:16:48|[libpdi] channelNum: 1
[m[0;32;32m23:16:48|[libpdi] fingerPrintCnt 0
[m[0;32;32m23:16:48|[libpdi] frontFaceRecognition 0
[m[0;32;32m23:16:48|[libpdi] <-------System3_getSystemInfo-------<
[m[33;40m[23:16:48 warn Manager 320 Unknown:0]init:91 use default cmos def path!
[0m[32;40m[23:16:48 info Manager 320 Unknown:0]use default CMOS definition!
[0m[32;40m[23:16:48 info Manager 320 Unknown:0]Src/MagicBox.cpp:CMagicBox:381 m_realDeviceType(IPC-HDW4830EM)
[0;32;32m23:16:48|[libpdi] read RTC_SRAM_REBOOT = 1
[m[0;36m23:16:48|[libpdi] PDI_getStartUpFlag: 2
[m[0m[32;40m[23:16:48 info Manager 320 Unknown:0]CMagicBox::CMagicBox() getStartUpFlag 2
[0m[33;40m[23:16:48 warn Manager 320 Unknown:0]CMagicBox::setSubModuleInfo fail!
[0m[32;40m[23:16:48 info Manager 320 Unknown:0]CMagicBox::onConfigAutoMaintain day = [2], hour = [2], min = [0], enable = [true]
[0m[32;40m[23:16:48 info Manager 320 Unknown:0]CMagicBox::startDstTune readCMOS DstTune flag is 0.
[0m[31;40m[23:16:48 error Manager 320 Unknown:0]CMagicBox::readFileSec /var/tmp/pd/ProductDefinition is not exist!
[0m[31;40m[23:16:48 error Manager 320 Unknown:0]CMagicBox::config read productDefinition file failed.
[0m[31;40m[23:16:48 error Manager 320 Unknown:0]CMagicBox::readFileSec /var/tmp/pd/ProductPathSensitive is not exist!
[0m[31;40m[23:16:48 error Manager 320 Unknown:0]CMagicBox::config read productDefinitionEncrypt file failed.
[0m[33;40m[23:16:48 warn Manager 320 Unknown:0]CMagicBox::CMagicBox() load product definition Resolution file failed.
[0m[33;40m[23:16:48 warn Manager 320 Unknown:0]CMagicBox::CMagicBox() load product definition language file failed.
[0m[32;40m[23:16:48 info Manager 320 Unknown:0]CMagicBox::m_systemInfo.noPtz == [1]
[0m[32;40m[23:16:48 info Manager 320 Unknown:0]CMagicBox::m_systemInfo.noSdCard == [0]
[0m[32;40m[23:16:48 info Manager 320 Unknown:0]CMagicBox::m_systemInfo.bandWidth == [80]
[0m[32;40m[23:16:48 info Manager 320 Unknown:0]Src/MagicBox.cpp:config:2237 set PD Device to IPC-HDW4830EM
[0m[31;40m[23:16:48 error Manager 320 LanguageShorthand.cpp:50]CLanguageShorthand file is not exist!
[0m[31;40m[23:16:48 error Intelli-665923 320 Unknown:0]Please use initIntelliComponentLibrary() instead of function (initIntelliComponentLibraryIPC)!
[0m[32;40m[23:16:48 info Intelli-665923 320 Unknown:0]enter initIntelliComponentLibrary .......
[0m[32;40m[23:16:48 info Intelli-665923 320 Unknown:0]Dh3InitSD configLib
[0m[32;40m[23:16:48 info Intelli-665923 320 Unknown:0]Dh3InitSD configLib2
[0m[37;40m[23:16:48 trace Intelli-665923 320 Unknown:0]isSupportHeatMap: bSupport[0]
[0m[33;40m[23:16:48 warn Manager 320 CommonConfigManager.cpp:400]CCommonConfigManager::getConfig FishEyeMode is Json::nullValue!
[0m[31;40m[23:16:48 error Manager 320 AlarmManager.cpp:142]CAlarmManager::onConfigSafetyAbnormalAlarm, 142, m_wraper or m_wrapper->setSafetyAbnormalMonitorParam is NULL!
[0m[37;40m[23:16:48 trace Infra:791859M 358 Thread.cpp:115]ThreadBody Enter name:WatchDog, id:358, prior:N1, stack:0x348b4c44
[0m[31;40m[23:16:48 error Manager 320 UserManager.cpp:87]Src/Compat/UserManager.cpp:87 param format error
[0m[37;40m[23:16:49 trace Manager 320 Unknown:0]CConsole::registerCmd had been register!!
[0m[37;40m[23:16:49 trace Manager 320 Unknown:0]CConsole::registerCmd had been register!!
[0m[33;40m[23:16:49 warn Infra:791859M 320 Thread.cpp:411]this:0x34ab510 too small stack size, StackSize:1024, adjust to 16k
[0m[37;40m[23:16:49 trace Manager 320 FileLog.cpp:186]CFileLog::attachFilter
[0m[33;40m[23:16:49 warn Manager 320 CommonConfigManager.cpp:400]CCommonConfigManager::getConfig Network is Json::nullValue!
[0m[33;40m[23:16:49 warn Manager 320 Unknown:0]CMagicBox::getDeviceSubClass DeviceSubClass empty !
[0m[37;40m[23:16:49 trace Manager 320 TelnetHelper.cpp:77]CTelnetConfigHelper::onConfigTelnet(), m_cfgtelnet: null
[0m[37;40m[23:16:49 trace Manager 320 TelnetHelper.cpp:83]ConfigTelnet={
"Enable" : false
}
[0m[37;40m[23:16:49 trace Infra:791859M 359 Thread.cpp:115]ThreadBody Enter name:Console, id:359, prior:N1, stack:0x340b4c44
[0m[37;40m[23:16:49 trace Manager 320 TelnetHelper.cpp:110]setTelnet interface ok!!!!!!!!,110,Src/Helper/TelnetHelper.cpp
[0m[31;40m[23:16:49 error Manager 320 SSHDHelper.cpp:72]CSShConfigHelper::start, get ProductDefinition[SupportSSH] Failed || SupportSSH is false.
[1;33m23:16:49|[libpdi] WARN : Device has no crypt chip!
[m[0;32;32m23:16:49|[libpdi] English
[m[0m[31;40m[23:16:49 error Manager 320 Locales.cpp:153]Src/Locales.cpp:153 system has no supportLanguages.
[0m====================== assert failed ==========================
backtrace f is NULL
Assert(0) failed
File <---> Src/Locales.cpp
Function <---> virtual bool Dahua::Manager::CLocales::config(const Json::Value&)
backtrace f is NULL
====================== assert failed ==========================
backtrace f is NULL
Time : Tue Oct 4 23:16:49 2022
=========================== TRACE START ===================================
Tid:320, Exception type : Assert failed
ARM_lr:76dbe57d, ARM_pc:76dbdf96 ARM_sp:7eb56ec0.
[00010000-0106d000] sonia,0000018f 00000875
[0107d000-01346000] sonia,0000038f 00100873
[7637c000-7637d000] libutils.so.0,0000018f 00000075
[7638c000-7638d000] libutils.so.0,0000038f 00100073
[7638d000-763a5000] libgcc_s.so.1,0000018f 00000075
[763b5000-763b6000] libgcc_s.so.1,0000038f 00100073
[763b6000-7641b000] libm.so.6,0000018f 00000075
[7642a000-7642b000] libm.so.6,0000038f 00100071
[7642b000-7642c000] libm.so.6,0000038f 00100073
[7642c000-7651b000] libstdc++.so.6,0000018f 00000075
[7652b000-76530000] libstdc++.so.6,0000038f 00100071
[76530000-76532000] libstdc++.so.6,0000038f 00100073
[76534000-765b3000] libimg_dsp_s3l_hf.so,0000018f 00000075
[765c2000-765c4000] libimg_dsp_s3l_hf.so,0000038f
[1;30m23:16:49|[DH_Binder] Process sonia(pid:320) close binder !
[m 00100073
[765f9000-766b5000] libimg_algo_s3l.so,0000018f 00000075
[766c4000-766cd000] libimg_algo_s3l.so,0000[0;32;32m23:16:49|[pdc] Adc_release
[m038f 00100073
[76a53000-76a5d000] libalgicr.so,0000018f 00000075
[76a6c000-76a6f000] libalgicr.so,0000038f 00100073
[76a6f000-76a72000] libalgh3a.so,0000018f 00000075
[76a81000-76a82000] libalgh3a.so,0000038f 00100073
[76a82000-76ac3000] libalgae.so,0000018f 00000075
[76ad2000-76ad7000] libalgae.so,0000038f 00100073
[76ad7000-76adb000] libaewdrv.so,0000018f 00000075
[76aea000-76aeb000] libaewdrv.so,0000038f 00100073
[76aeb000-76aee000] libpdbt.so,0000018f 00000075
[76afd000-76afe000] libpdbt.so,0000038f 00100073
[76afe000-76b18000] libamp.so,0000018f 00000075
[76b27000-76b29000] libamp.so,0000038f 00100073
[76b2f000-76b84000] libaew.so,0000018f 00000075
[76b93000-76bb6000] libaew.so,0000038f 00100073
[76c14000-76c26000] libz.so.1,0000018f 00000075
[76c2e000-76c2f000] libz.so.1,0000038f 00100073
[76c2f000-76d0b000] libc.so.6,0000018f 00000075
[76d1a000-76d1c000] libc.so.6,0000038f 00100071
[76d1c000-76d1d000] libc.so.6,0000038f 00100073
[76d20000-76d25000] librt.so.1,0000018f 00000075
[76d34000-76d35000] librt.so.1,0000038f 00100071
[76d35000-76d36000] librt.so.1,0000038f 00100073
[76d36000-76d4a000] libdewarp.so.1,0000018f 00000075
[76d59000-76d5a000] libdewarp.so.1,0000038f 00100071
[76d5a000-76d5b000] libdewarp.so.1,0000038f 00100073
[76d5b000-76d62000] libivf.so,0000018f 00000075
[76d6a000-76d6b000] libivf.so,0000038f 00100073
[76d6c000-76d6f000] libstp.so,0000018f 00000075
[76dbdf96]
[006dc200] [006cc200] sonia
[006dc588] [006cc588] sonia
[00564a36] [00554a36] sonia
[005573da] [005473da] sonia
[0003c498] [0002c498] sonia
[034c3a18]
[00000098]
signr=11
Segmentation fault
####application exit:139, system will reboot!
upgrade forbidden
BusyBox v1.18.4 (2018-10-15 17:12:13 CST) built-in shell (ash)
Revision: 46870
Enter 'help' for a list of built-in commands.
~ #
….I’m pretty positive it just needs a re-flash of firmware
