I had to run the cable between 2 studs so I had to cut the Network jack. Unfortunately my wife trashed it so I have no reference to wire a connector to the cable. Anybody knows the wiring scheme for proper poe?
Thanks
Thanks
Dahua IPC-HDW5231R-Z network cable wiring.
- Thread starter rado stefano
- Start date
Orange-White, Orange, Green-White, Blue, Blue-White, Green, Brown-White, Brown
There are only solid colors no green...
I kind of know how they are going just don't know if orange and yellow are connected together
mat200
IPCT Contributor
- Jan 17, 2017
- 16,079
- 27,023
There are 2 standards... "A" and "B" please double check the other end if you can to confirm which one the cable is configured to.
NoloC
Getting comfortable
- Nov 24, 2014
- 684
- 460
I think You need the pinout for the Dahua wires not the EIA/TIA stuff.
I think I saw someone in one of the threads here recently posted it along with pics of a keystone punch down jack that replaced the original connector.
Might want to dig through those threads. I did a bit but came up with nothing. Someone here knows! Be sure as you can easily fry the cam with wrong POE.
I think I saw someone in one of the threads here recently posted it along with pics of a keystone punch down jack that replaced the original connector.
Might want to dig through those threads. I did a bit but came up with nothing. Someone here knows! Be sure as you can easily fry the cam with wrong POE.
tangent
IPCT Contributor
- May 12, 2016
- 4,641
- 3,995
So that means you cut off the connector on the camera and not the cable feeding the camera. Unfortunately they use their own color scheme and it changes sometimes. I know this has been posted before.
tangent
IPCT Contributor
- May 12, 2016
- 4,641
- 3,995
mat200
IPCT Contributor
- Jan 17, 2017
- 16,079
- 27,023
THIS WORKS.
I cant see this image. What did you get to work? I have the same problem; trashed the female end of my 5231r-z and need to re-wire it.
Thanks!