Dahua NVR5216-4KS2 / NVR5216-16P-4KS2

mmdb said:
Thx crazykiller i will try it ..just 1 question what is GUI and do i acdes it
Click to expand...

In this case i mean the OSD (On Screen Display), which is accessible locally at the NVR, with monitor and mouse.
 
tigerwillow1 said:
I've had the same issue with some (not all) chinese market dahua cameras. I have to set up the motion and ivs settings directly on the camera. Even after that, it can be a messy job to set the dvr to record on the trigger. Fortunately, once that's set up on the nvr it sticks, and when I want to adjust the motion or ivs settings I just log onto the camera.
Click to expand...

Me too. I changed most of my cams to cams from @EMPIRETECANDY. The few Chinese domestic market ones I still have are configured through their individual GUI and recording on IVS events is activated in the NVR, so it works for me and even IVS rules are shown correct in the NVR.
 
  • Like
Reactions: EMPIRETECANDY
How do i know what stores has the Orginal English FW NVR5216-4KS2 ? Some write it but can i trust that ?

Will this NVR do 16x8MP cameras ?
 
Last edited:
@Myllerman get it from @EMPIRETECANDY and you are save. You get it with the general English oem firmware and will be able to changed it to the original branded Dahua one, if you like their logo like me
Regarding to the tech spec it will do 4K for all channels, but I have no experience with that, because I’m using the 2MP Starlight cams.
 
Crazykiller said:
@Myllerman get it from @EMPIRETECANDY and you are save. You get it with the general English oem firmware and will be able to changed it to the original branded Dahua one, if you like their logo like me
Regarding to the tech spec it will do 4K for all channels, but I have no experience with that, because I’m using the 2MP Starlight cams.
Click to expand...

Thats good. I didnt find it in the shop i think but i guess he can order in stuff. Wont be needing it quite yet thought, my system is a build in progress so to speak hehe.
 
Myllerman said:
Thats good. I didnt find it in the shop i think but i guess he can order in stuff. Wont be needing it quite yet thought, my system is a build in progress so to speak hehe.
Click to expand...
JUST Contact me is easy, lol...
 
mat200 said:
Hi Myllerman,

Yes it can handle 16x 4K/8MP - note though at lot of the NVRs will have issues displaying all of those 4K streams, recording gets priority - so no worries on recording.

Ref:
Over Decode Ability Explained for NVRs
Click to expand...

Sounds good. I dont have that many now but for the future its good to know it works. Need to build the system a little at the time as the cameras aint excactly cheap hehe :)

The NVR will be hidden and only watching the NVR is somthing happens. Atm i am using smartPSS to watch the streams.
 
i have 5416 p and when i try to set ivs tripwire i got this message cameras are 5231 bullets,what is the problem ?
 

Attachments

  • IMG_20180115_103915.jpg
    IMG_20180115_103915.jpg
    1.2 MB · Views: 67
@mmdb which firmware is yours?
 
Mine is from September 2017. Looks a little different.
Same failure, but I’m able to configure the rules anyway. Are you able to add a rule? After adding the rule I didn’t see the tripwire on the screen. After checking the cameras WebGUI I could see the rule was added there correctly. I recently did a factory reset to the cam so I had to enable IVS in the smart plan section first. Then the line appeared in the NVR GUI as well.
2D4A753D-F28F-4367-8AF6-495F637ED07E.jpeg
E4D47F4B-6BB8-4487-8280-0CA1BB9EEA3E.jpeg
D9EF6423-EBD7-4704-80C2-3CA0DF59214D.jpeg
 
Last edited:
big thx crazzykiller ...yes it looks different ...
i was not able to add the rule,will check this again today if find some time i(its 130km drive to nvr)
when i connect to nvr trough smartpss i got this offered options cant see where to add the rule IMG_20180117_152754.jpg IMG_20180117_152754.jpg
and i dont remember to see smart plan ,dont think there is that option on mine firmware ,but will double check that to...
 

Smart Plan is the option in the cameras GUI. where you have to decide between face detection and IVS. With defaults, nothing was checked at mine.
In SmartPSS your Screenshots are from the live view. You can’t configure IVS from live view. You have to go to the device config.
You should also be able to configure it with the NVR WebGUI or SmartPSS, so no 130km turn would be necessary.
 
big thx crazykiller... i have other nvr 5216p and 8 5231 turrets and 49 ptz and i just tried to see settings for nvr and everything works and its there .. will have to check some settings in i presume on 5416p nvr will do it tommorow .. here is pics from 5216 from my work place IMG_20180119_141053.jpg
 
  • Like
Reactions: Crazykiller
Ive read through the first couple pages and the last few pages of this 26page thread. Sorry its been a long day of reading...but is there a general consensus on the viability or performance of the Dahua NVR5216-4KS2?
Should I get this model? Or keep looking?
 
I would recommend it. I was quite happy with this and and it’s performance. I only,changed to the 5224 because of the amount of PoE ports.
 
  • Like
Reactions: 2ndA
i did trip wire successfully on my other nvr 5216 and install gdmss plus + gdmsshd on my tab ...how do i get picture snap to my tablet when tripwire is activated ?
 
You must log in or register to reply here.
Top Bottom