I have a Dahua DH-SD59430U-HNI PTZ this is a great camera but one problem that has persisted since I got it almost 6 mo ago is that the PTZ interface in BI is extremely poor. It takes numerous attempts with the arrows to get the camera to move at all and when it finally does its very inconsistant....I have checked all connection and have even swapped out a Panasonic WV-SC385 on the same connection and the Panasonic has no problems at all...I have done everything that I can think of any help is appreciated....TKS
Dahua PTZ issues....
- Thread starter msp116
- Start date
nayr
IPCT Contributor
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408
With Smart PSS as well ast he camera UI no problems....Fenderman what "settings" are you referring to exactly? Camera or BI?
wantafastz28
Getting comfortable
What speed are you using for the movement on the ptz?
I have it set to 5 on both the camera UI, and ptz settings in BI and have no problems at all.
I have it set to 5 on both the camera UI, and ptz settings in BI and have no problems at all.
hmjgriffon
Known around here
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408
Using the ONVIF profile for PTZ.....have tried all the Dahau and none seem to work? Also I purchased 2 of these cameras and the other is on a completely different system/location/network and it also has the same problem....one thing I just noticed with PSS open/viewing if I use the arrows in BI the camera moves immediately in PSS but in BI there is a serious delay or it doesn't do anything at allI?
Last edited:
hmjgriffon
Known around here
Yes, same thing using UI2 sometimes PTZ control is immediate and sometimes delayed and sometimes not at all.....Im pretty sure It has something to do with the com protocol in BI because when using PSS or the camera UI no problems at all...and as stated above this also occurs on a completely different system/site running BI......Are you using this EXACT camera in BI? if so any problems? what setting are you using? and what is your software/firmware/ptz in the camera?...tks
Last edited:
hmjgriffon
Known around here
With the BI app on my phone I get no lag, in the web interface I get a very slight lag, not enough to matter really. I am running a SD59225U-HNI.
Firmware:
Software Version2.420.0000.9.R.2512, Build Date: 2016-07-12
WEB Version3.2.1.360570
ONVIF Version2.42
PTZ Version3.00.48.RHNT
Bi settings:
Firmware:
Software Version2.420.0000.9.R.2512, Build Date: 2016-07-12
WEB Version3.2.1.360570
ONVIF Version2.42
PTZ Version3.00.48.RHNT
Bi settings:
Tks .... it seems your PTZ ver is either newer of different than the one IM using. The delay seems even across all platforms...as I have been for the last 6mo Im still at a loss....tks
I have a purchased a Dahua IPC-HFW5830-E and tried PTZ but doesn't works at all. Using the ONVIF profile for PTZ, have tried all the Dahau and none seem to work.
Please can anyone help.
Thanks,
Jeet
Please can anyone help.
Thanks,
Jeet
looney2ns
IPCT Contributor
Just checked with Andy @ KingSecurity said this is the latest firmware/PTZ for the camera....this camera is running off a POE+ switch, but gonna pull it down and try it with the PS that came with to see if it makes difference....
