DH_NVR5XXX-4KS2_MultiLang_V4.001.0000000.1.R.200319.zip

I am running the 200319 version and it works on my older 5432-16P-4ks2 hardware v1.0. There are still problems because the firmware is not very compatible with Dahua AI cameras. I was hoping that a new firmware release would fix the issues however the two new versions just listed will not load on my NVR. It starts but then gives a failed to update message. At least the attempt didn't brick anything.
 
EMPIRETECANDY said:
1

NVR5xxx-4KS2 POE/NONE POE Serial port update guide

Hey guys Lots of guys use V2 version firmware to update the V1 NVR, bricked a lot of NVR. For the firmware details, please ask your supplier with the package files. If can't find, can contact me for further details. I am testing on a new firmware for V1 and V2 for the NVR5XXX-4KS2, tested on a...
ipcamtalk.com ipcamtalk.com

This is the link for the guide, thank you!
Click to expand...


Andy, isnt this for when you NVR is bricked?

Mine is just fine I just want to find out if i Got a V1 of V2 version.
 
Bl4ckviper said:
Andy, isnt this for when you NVR is bricked?

Mine is just fine I just want to find out if i Got a V1 of V2 version.
Click to expand...
I test on the V1 model, it works, so the V2 one still not test, let's wait some days, i already asked @Wildcat_1 making some testing this week
 
Guys, I found interesting comparisons, according to the manufacturer's information v2.0 has a reset button, can you check how it looks on version v1.0?
I have 5208-4KS2 bought in 2018 (2018-04 on box) is V2.0 and 5816-16P-4KS2E bought in 2020 - on the box date 2018-04
Reset button is probably K1 on the board
 

Attachments

  • compare.jpg
    compare.jpg
    114.4 KB · Views: 64
Last edited:
  • Like
Reactions: igorrasic
Will release the latest new one soon, we test on the V1 and V2 version, looks all ok. But for V1 version, still be careful before update it.
 
mazut said:
Guys, I found interesting comparisons, according to the manufacturer's information v2.0 has a reset button, can you check how it looks on version v1.0?
I have 5208-4KS2 bought in 2018 (2018-04 on box) is V2.0 and 5816-16P-4KS2E bought in 2020 - on the box date 2018-04
Reset button is probably K1 on the board
Click to expand...

I have a DHI-NVR5216-16P-4KS2E box date 2018-09 and it also has a small button "K1 next the cooling.

Also says Hardware V1.0 in menu
 
Last edited:
Mine says V2 on sticker on bottom, has k1 reset button BUT says Hardware V1.0 in the on screen information tab.

Not a clue >>>>>>>>

M

IMG_4152.JPG
 
Just wanted to add to the thread for future readers, I have an NVR5216-16P-4KS2E (hardware v1.0 per the info tab haven't checked the physical board) and used the firmware file "DH_NVR5XXX-4KS2_MultiLang_V4.001.0000000.1.R.200319.bin" directly from Dahua's website and it upgraded fine from version 3.216. LOTS of new features and a MUCH nicer GUI. So far no issues. We'll see though. I'm considering doing a system restore just to give it a clean slate to start with on the new major firmware update.
 
  • Like
Reactions: Arjun
ben_r_ said:
Just wanted to add to the thread for future readers, I have an NVR5216-16P-4KS2E (hardware v1.0 per the info tab haven't checked the physical board) and used the firmware file "DH_NVR5XXX-4KS2_MultiLang_V4.001.0000000.1.R.200319.bin" directly from Dahua's website and it upgraded fine from version 3.216. LOTS of new features and a MUCH nicer GUI. So far no issues. We'll see though. I'm considering doing a system restore just to give it a clean slate to start with on the new major firmware update.
Click to expand...

Be interested in what version of hardware you have when verified.

m
 
  • Like
Reactions: Arjun
ben_r_ said:
Hmm, well I dont see a sticker anywhere, but there is a switch. Though my board looks different from yours due to the POE ports.
Click to expand...

Welcome to the confused world of NVR5216-16P-4KS2(E). I hope Andy stops by and helps us out. I am not going to be much help because of the POEs obviously are going to be different. Does the new software report Ver 1 or Ver 2. I am assuming ver 1.

M
 
Gadget -X said:
Welcome to the confused world of NVR5216-16P-4KS2(E). I hope Andy stops by and helps us out. I am not going to be much help because of the POEs obviously are going to be different. Does the new software report Ver 1 or Ver 2. I am assuming ver 1.

M
Click to expand...
Latest firmware does state Hardware Version V1.0.
 
You must log in or register to reply here.
Top Bottom