DS-2CD2132F-IS not recognizing local mircoSD card

Ok now it's reading:
[TABLE="class: deviceinfotable"]
[TR]
[TD="class: rowheader deviceinfotd"]Model[/TD]
[TD="class: deviceinfotd"]DS-2CD2132F-IS[/TD]
[/TR]
[TR]
[TD="class: rowheader deviceinfotd"]Serial No.[/TD]
[TD="class: deviceinfotd"]DS-2CD2132F-IS20150221CCWR659834416[/TD]
[/TR]
[TR]
[TD="class: rowheader deviceinfotd"]Firmware Version[/TD]
[TD="class: deviceinfotd"]V5.3.0 build 150513[/TD]
[/TR]
[TR]
[TD="class: rowheader deviceinfotd"]Encoding Version[/TD]
[TD="class: deviceinfotd"]V5.0 build 150327

[/TD]
[/TR]
[/TABLE]

Still not reading any cards. :(
What is the command to get the bootup log? looks like normal Linux commands are not here in this version.
 
As far as messing with firmware.. nah, lol, I'll mess something up.
I'd rather return this while I can.
Click to expand...
I was going to say - sensible choice. But I see things have moved on.

It was odd that it has CCWR (World Region) yet an installed firmware of 5.2.5 with 5.2.8 on the label (box) - usually an indicator of 'seller modified firmware'.
If you want to spend some more time messing around with the tftp updater - there are various choices here: http://www.hikvisioneurope.com/portal/index.php?dir=Product Firmware/Cameras/DS-2CD2xx2/
Browser cache?
 
That version of firmware has a crippled version of the shell known as 'protect shell', or psh, with which you can do very little, even via the serial console.
But by changing the firmware to a known official Hikvision release which should work OK, you have proven that the hardware is not operating as advertised for the model.
Out of curiosity - in the Configuration | Video/audio | Video menu do you have a Video/audio Video type selection and an Audio tab?
 
alastairstevenson said:
That version of firmware has a crippled version of the shell known as 'protect shell', or psh, with which you can do very little, even via the serial console.
But by changing the firmware to a known official Hikvision release which should work OK, you have proven that the hardware is not operating as advertised for the model.
Out of curiosity - in the Configuration | Video/audio | Video menu do you have a Video/audio Video type selection and an Audio tab?
Click to expand...

There is a Video tab only and it has:
Stream Type Main Stream(Normal) Sub Stream
Video Type Video Stream
Resolution 1280*720P1920*1080P2048*1536
Bitrate Type Variable Constant
Video Quality LowestLowerLowMediumHigherHighest
Frame Rate 251/161/81/41/21246810121516182022 fps
Max. Bitrate Kbps
Video Encoding H.264
Profile Main Profile
Frame Type BBP P
I Frame Interval
Correction Mode Software Hardware
Mount type Wall Ceiling Table
SVC ON OFF Auto
 
Well, just applied for an RMA. Would have loved to keep these things but without 2 key functional pieces that I actually need might as well bought a bricked camera and mounted it. lol
Lets see what the vendor will say as they never replied to my last weeks question regarding microSD slot.
 
Alrighty then.
Just got my refund. :)
Any suggestions on what should I get in US? I just need something similar to DS-2CD2132F-IS where I need 2.8mm + audio recording.
Thanks
 
You must log in or register to reply here.
Top Bottom