I just bricked my camera trying to upgrade to the firmware
Can someone with the same camera telnet to it and retrieve the devtype (using prtHardInfo, similar to the screen shot bellow) so I can unbrick it with BrickfixV2?
Can someone with the same camera telnet to it and retrieve the devtype (using prtHardInfo, similar to the screen shot bellow) so I can unbrick it with BrickfixV2?
The devtype is as shown in your screenshot above - it's not changed by the stock firmware.
BrickfixV2 can only be used on R0 series cameras - not G2 series cameras.
To recover the camera, it will probably be easiest to connect to the serial console and aapply the stock firmware there.
I was going by the title of your thread - and didn't look at the model number in the prtHardInfo screenshot. Which shows it's an R0 series device, contrary to what I'd thought.
Looks like the camera got plugged into an NVR PoE port.
I was going by the title of your thread - and didn't look at the model number in the prtHardInfo screenshot. Which shows it's an R0 series device, contrary to what I'd thought.
Looks like the camera got plugged into an NVR PoE port.