DS-2CD4A26FWD-IZ with Onboard LPR/ANPR(License Plate Recognition)

Discussion in 'Hikvision' started by izzner, Mar 20, 2016.

Share This Page

  1. FrankMCN

    FrankMCN Getting the hang of it

    Joined:
    Apr 14, 2017
    Messages:
    139
    Likes Received:
    56
    'Third stream setting is normally under 'Maintence' -> 'System Service'

    From your description sounds like your just getting a notification and that LPR is active, have you tested it yet?
     
  2. slopolytech

    slopolytech n3wb

    Joined:
    Apr 9, 2018
    Messages:
    17
    Likes Received:
    4
    For anybody wondering, it is possible to upgrade a non /P camera with LPR firmware. I followed these instructions How to set up Hikvision ANPR to the letter using the firmware attached below. The camera shows the "old" style interface but comes up as firmware version 5.4.5.

    I am using this camera with a DS-7716NI-I4 NVR and the vehicle detection seems to work properly. I imported a license plate into the whitelist and was able to get the audible alarm on the NVR to activate when it picked up on the whitelisted plate. However, there is no notification in iVMS-4500 or Hik-Connect app like a line-crossing or alarm input event would trigger. I have a true DS-2CD4A26FWD-IZHS/P coming this week, I'll have to see if the push notifications for white/blacklisted plates work on that unit.

    Screen Shot 2018-04-18 at 8.38.42 PM.png Screen Shot 2018-04-18 at 8.39.07 PM.png
     

    Attached Files:

    john13200242 likes this.
  3. john13200242

    john13200242 n3wb

    Joined:
    Apr 19, 2018
    Messages:
    1
    Likes Received:
    0
    I would like to say thank you for the download link. Today I upgraded my ANPR camera's firmware from the Aus Hikvision site and my vehicle detection options disappeared! But the firmware you provided got it back :)
     
  4. slopolytech

    slopolytech n3wb

    Joined:
    Apr 9, 2018
    Messages:
    17
    Likes Received:
    4
    Glad it helped you!
     
  5. Prometheo

    Prometheo n3wb

    Joined:
    Jun 21, 2018
    Messages:
    1
    Likes Received:
    1
    Location:
    Around
    Just a note to back up and thanks to slopolytech that the 5.4.5 firmware he gave did upgrade to give alpr / anpr on a DS-2CD4A26FWD . It wasn't a Chinese serial number version
     
    Itsokey likes this.
  6. Jeremeyh

    Jeremeyh Young grasshopper

    Joined:
    Jun 22, 2018
    Messages:
    52
    Likes Received:
    1
    Location:
    New Zealand
    Can I ask where you found this firmware? Or is it best not to ask? I'm looking to buy a DS-2CD4A26FWD-IZS/P from aliexpress, the seller says no special firmware is needed, but I feel it probably is. Also I see your model had IHZS/P but the one I want is only IZS/P was the H a typo?
     
  7. GianniCar

    GianniCar n3wb

    Joined:
    Jan 25, 2018
    Messages:
    13
    Likes Received:
    0
    The firmware you posted works for ANPR and I appreciate you sharing it, however, it doesn't appear that it's actually v5.4.5 since it looks just like my previous 5.4.3 and still does not work with Google email since it doesn't allow for TLS encryption. Is there any way you could find a more recent one that supports both ANPR and TLS email encryption?
     
  8. Jeremeyh

    Jeremeyh Young grasshopper

    Joined:
    Jun 22, 2018
    Messages:
    52
    Likes Received:
    1
    Location:
    New Zealand
    That firmware downgrades the /P camera to 20fps. Only good for non /P version
     
  9. Jeremeyh

    Jeremeyh Young grasshopper

    Joined:
    Jun 22, 2018
    Messages:
    52
    Likes Received:
    1
    Location:
    New Zealand
    As for Gmail I found this fix to work. It's a Gmail problem not a firmware problem.
    [SOLVED] Hikvision Gmail Failure
     
  10. Derckie

    Derckie n3wb

    Joined:
    Nov 27, 2017
    Messages:
    6
    Likes Received:
    0

    Hi, did you ever solved this, because I have exact the same problem. I get the error and not able to save :(

    P.S. this firmware downgrade the unit from 60fps to max 30fps
     
  11. Jeremeyh

    Jeremeyh Young grasshopper

    Joined:
    Jun 22, 2018
    Messages:
    52
    Likes Received:
    1
    Location:
    New Zealand
    P.S. this firmware downgrade the unit from 60fps to max 30fps[/QUOTE]

    Do you have the /P model?
     
  12. Derckie

    Derckie n3wb

    Joined:
    Nov 27, 2017
    Messages:
    6
    Likes Received:
    0
    no the one without. It came with firmware without lpr and 60fps, installed the firmware in this thread and I am unable to select 60fps.
     
  13. Jeremeyh

    Jeremeyh Young grasshopper

    Joined:
    Jun 22, 2018
    Messages:
    52
    Likes Received:
    1
    Location:
    New Zealand
    I bought the P version camera and this firmware downgrades the fps to 20fps. I have replied in another thread with the proper P firmware which fixed the problem. Not sure if you can use it on non P version though
     
  14. Derckie

    Derckie n3wb

    Joined:
    Nov 27, 2017
    Messages:
    6
    Likes Received:
    0
    No, i don't think so, but the LPR isn't working as I get a error "Third Stream cannot be used after the vehicle detection function is enabled" and it's unable to save the settings page.

    this is my cam info:

    Model DS-2CD4A26FWD-IZS
    Serial No. DS-2CD4A26FWD-IZS20180306CCWR**
    Firmware Version V5.4.5 build 170302
    Encoding Version V7.0 build 160822
    Number of Channels 1
    Number of HDDs 0
    Number of Alarm Input 1
    Number of Alarm Output 1

    It's on the same versions as slopolytech, but i can't get LPR to work :(
     
    Last edited: Aug 29, 2018
  15. Derckie

    Derckie n3wb

    Joined:
    Nov 27, 2017
    Messages:
    6
    Likes Received:
    0
    OK. i solved my problem so if anyone get the error "Third Stream cannot be used after the vehicle detection function is enabled" do a factory default. Now I am able to set LPR settings and save them :)
     
  16. GianniCar

    GianniCar n3wb

    Joined:
    Jan 25, 2018
    Messages:
    13
    Likes Received:
    0
    Yeah I tried that before and tried it again with no luck after following all the steps on my Google account. Is that currently working for you?
     
  17. Jeremeyh

    Jeremeyh Young grasshopper

    Joined:
    Jun 22, 2018
    Messages:
    52
    Likes Received:
    1
    Location:
    New Zealand
    Yes but I set it up on my NVR not the camera. I'll get a photo of the settings when I'm home later
     
  18. Jeremeyh

    Jeremeyh Young grasshopper

    Joined:
    Jun 22, 2018
    Messages:
    52
    Likes Received:
    1
    Location:
    New Zealand
    I think it needs to be done from the NVR as the camera doesn't have connection to the internet directly. I could be wrong but I couldn't get it to send from camera either
     
  19. Jeremeyh

    Jeremeyh Young grasshopper

    Joined:
    Jun 22, 2018
    Messages:
    52
    Likes Received:
    1
    Location:
    New Zealand
    Here you go. Need to use the password you were given by google when setting up NVR access in your Gmail 2 step authentication. As you can see I'm using Gmail to send to my yahoo email
     
  20. Derckie

    Derckie n3wb

    Joined:
    Nov 27, 2017
    Messages:
    6
    Likes Received:
    0