ds-7104sn in chinese to english

almemento

n3wb
Joined
May 15, 2015
Messages
17
Reaction score
6
hello,
i have a problem with firmware for DS-7104SN without PoE.
i Have download fw 3.0.13 from baidu forum - translate by Google and install it by tftp.
nvr was working, but everything is in chinese.
i try to modified language to 1 by hiktool but no Effect.
also there is no option to enable Telnet ;(
what else can i do?

thanks
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,966
Reaction score
6,795
Location
Scotland
The Hiktool program changes the language in the header of a firmware file - not the language setting in the flash of an NVR or camera - so that the device won't reject the firmware with a 'language mismatch' error.
Do you still have the original English version of the firmware, or a backup of the mtdblocks and configuration from before the update?
 

almemento

n3wb
Joined
May 15, 2015
Messages
17
Reaction score
6
Nothing before update
but 3.0.13 eng version from hikvision i have.
when i try update from usb - of courde 3.0.13 eng version there is probably error? ... i dont know Because in chinese ;(
 

almemento

n3wb
Joined
May 15, 2015
Messages
17
Reaction score
6
thank you a lot! :) it is now in multi-language!
and what is most important for me - in Polish :D

soft is: 3.0.10 build 141201

is it option to have newer soft with multi language?
 

Abc12379

n3wb
Joined
Jun 2, 2015
Messages
4
Reaction score
0
Hello, and there is a firmware that was Russian???
Device DS-7108N-SN/P
 

Abc12379

n3wb
Joined
Jun 2, 2015
Messages
4
Reaction score
0
Официально нет.
Мультиязычные прошивки для этого аппарата не имеют русского языка.
Ну эта прошивка откуда то взялась! Ее тоже не должно было бить! Сегодня поковыряю 1024x768.cfg, может там что найду!
 

Abc12379

n3wb
Joined
Jun 2, 2015
Messages
4
Reaction score
0
из комплекта сделай сам.
А где взять хотя бы 1024x768.cfg с русским или gui_value.cfg или где там русский хранится, не переводить же все вручную?
 
Top