Hi All,
Have a DS-7716N-E4/16P Chinese model trying to restore after a failed firmware up date tried the steps listed but no luck
Pressing any keys results in this being displayed
(SysRq : HELP : show-ps-info(0) hik_thread_info_dump(1) hik_show_interrupts-info(2) kill-tasks-with PID(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W))
Can't seem to get the command prompt to come up like in the video 0:48
Any thoughts?
Thanks in advance
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
U-Boot 2010.06-svn (Aug 15 2015 - 15:18:43)
Protected at offset:0,size:20000 Protection status:[0xf88]=>[0xf8b].
Hit ctrl+u to stop autoboot: 0
### CRAMFS load complete: 3182048 bytes loaded to 0x80400000
timeout for link [4999]!
## Booting kernel from Legacy Image at 80400000 ...
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
init started: BusyBox v1.16.1 (2016-06-29 13:49:45 CST)
Starting udev: [ OK ]
Thu Jan 1 05:44:27 UTC 1970
----------<1> tar guir webs ----------
----------<2> show logo ----------
show logo Thu Jan 1 05:44:37 UTC 1970
mv: can't rename '/home/app/exec/pppd': No such file or directory
mv: can't rename '/home/app/exec/pppoe': No such file or directory
mv: can't rename '/home/app/exec/ss': No such file or directory
mv: can't rename '/home/app/exec/dropbear': No such file or directory
mv: can't rename '/home/app/exec/dropbearkey': No such file or directory
/home/start.sh: line 29: dropbearkey: not found
chmod: /usr/bin/dvrCmd/dvrtools: No such file or directory
----------<3> load hisi sdk ----------
The system mem size is 0x0
/
load 3535 ok
----------<4> del no use res ----------
mv: can't rename '/home/app/res/adAudio.jpg': No such file or directory
/home/start.sh: line 79: ./pppoed: not found
iSCSI daemon with pid=976 started!!!! the device is not toe !!!
BusyBox v1.16.1 (2016-06-29 13:49:45 CST) built-in shell (ash)
Enter 'help' for a list of built-in commands.
BusyBox v1.2.1 Protect Shell (psh)
Enter 'help' for a list of davinci system commands.
# DDR cpld.sys.bits.ddr_bitw : 0
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
SysRq : Emergency Remount R/O
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device is illegal, Please call factory!!!!!!
!!!!!!!you Device buy in cn, you firmware is en err!!!!!!
SysRq : HELP : show-ps-info(0) hik_thread_info_dump(1) hik_show_interrupts-info(2) kill-tasks-with PID(I) saK show-backtrace-all-active-cpus(L) show-memory-usage(M) nice-all-RT-tasks(N) powerOff show-registers(P) show-all-timers(Q) unRaw Sync show-task-states(T) Unmount show-blocked-tasks(W)
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------