Dynamic analysis disable

[papucica62]

Hello guys, hope everyone is doing great. I would like to ask a question regarding HikVision IP cameras. Is it possible to disable motion detection / dynamic analysis / that green square showing on the live view even if the line crossing detection is enabled?
The reason for this question is because that green square is very annoying and showing all movements on camera even the line crossing was not triggered. I would appreciate any help ! Thanks

 

[Chicago_2]

All I have found is it's either all or nothing.

 

[papucica62]

Same here we've been trying to kill it for quiet some time now, but its still there. It seems like mission impossible

 

[wmsr734]

It's funny in the 7 years that I have been using Hikvision, I have never been able to get it to turn on. I've always wanted to use it for a few days to help identify what is causing some false positives.

 

[alastairstevenson]

Is it possible to disable motion detection / dynamic analysis / that green square showing on the live view even if the line crossing detection is enabled?

On the camera or on the NVR?
In the web GUI, under Local | Live View Parameters, disable or enable the 'Rules' radio button as needed.

 

[papucica62]

On the camera or on the NVR?
In the web GUI, under Local | Live View Parameters, disable or enable the 'Rules' radio button as needed.

We can do over the camera or over the NVR.
Can you clarify local live view parameters. Is this under configuration? Thank you in advance.

 

[papucica62]

It's funny in the 7 years that I have been using Hikvision, I have never been able to get it to turn on. I've always wanted to use it for a few days to help identify what is causing some false positives.

To turn it on or turn it off ?

 

[alastairstevenson]

Enable to show the rules.
Disable to hide them.

 

[wmsr734]

To turn it on or turn it off ?

To turn it on, Enable Dynamic Analysis for Motion is selected but non of my cameras ever show the green squares. Following what was posted above and selecting Enable to show the rules has fixed it sorry for sort of hijaclking
papucica62s thread. Thanks for the help, this as bothered me for years.

 

[alastairstevenson]

Can you clarify local live view parameters. Is this under configuration? Thank you in advance.

 

[papucica62]

View attachment 87751

Thank you for clarifying. It seems that i dont have that option in my settings....

 

[papucica62]

To turn it on, Enable Dynamic Analysis for Motion is selected but non of my cameras ever show the green squares. Following what was posted above and selecting Enable to show the rules has fixed it sorry for sort of hijaclking
papucica62s thread. Thanks for the help, this as bothered me for years.

Hey, lickily someone was able to get things working

 

[papucica62]

View attachment 87751

Ok, so I have actually managed to find 'local' configuration. It only took a plug in to be installed on the web browser.
However, what I found is that the rules are already disabled.
I tried to enable it and disable again, but nothing changes. I still get those green squares on the live view.
Any other ideas folks?

 

[alastairstevenson]

I tried to enable it and disable again, but nothing changes. I still get those green squares on the live view.

Are you viewing on the camera web GUI, or via an NVR web GUI?
Both types of Hikvision device have the same ability to show the events on-screen, and the same configuration settings to enable or disable the facility.

 

[papucica62]

Are you viewing on the camera web GUI, or via an NVR web GUI?
Both types of Hikvision device have the same ability to show the events on-screen, and the same configuration settings to enable or disable the facility.

I tried it both on the NVR and camera itself. It was already disabled in both cases.

 

[busterboy]

View attachment 87751

WOW an old thread but after a Google search which pointed me here (thanks again Alastair) I found out how to enable - disable the green "Dynamic" squares on my screen.
Another school day.

 

[Inter]

I tried it both on the NVR and camera itself. It was already disabled in both cases.

The same for me. Whatever I do, the green "Dynamic" squares never show on my screen! Arrgh.