I have DS-2CD2132F-I camera on v5.4.5 build 170123 firmware.
I have been using a BT SMTP server with SSL until now for email alerts.
I have to move away from BT as my ISP so I am preparing to lose my BT account.
On the v5.4.5 firmware I have options in the configuration for TLS, but cannot get any of my gmail accounts to work (they work via other clients and I have the less secure option enabled). The test fails. I have also tried an Outlook.com account and a Yandex account (which only needs SSL not TLS). The smtp credentials work fine, but not via the camera. With the Yandex account I get incorrect user name or password, even though I know it is correct.
Anyone know a free TLS or SSL smtp service that works with Hikvision 2xx2 devices on 5.4.5 fw?
I only use the alerts for any storage disconnection issues etc, it's not firing out motion detection alerts all day.
I've done a lot of testing over the last 48 hours and tried all I can think of. Variations of configs, reboot cams after config change etc. I remembered to temporarily relax my firewall rules on my router (cams are locked down to DNS IP address and NTP and SLL/TLS ports outbound only) to check I wasn't blocking myself, but it's not that. I've tried setting the config via IVMS-4200 and the browser interface. I've also read a lot of posts on the subject. Results and success seem very varied.
Any tips or ideas appreciated.
I have been using a BT SMTP server with SSL until now for email alerts.
I have to move away from BT as my ISP so I am preparing to lose my BT account.
On the v5.4.5 firmware I have options in the configuration for TLS, but cannot get any of my gmail accounts to work (they work via other clients and I have the less secure option enabled). The test fails. I have also tried an Outlook.com account and a Yandex account (which only needs SSL not TLS). The smtp credentials work fine, but not via the camera. With the Yandex account I get incorrect user name or password, even though I know it is correct.
Anyone know a free TLS or SSL smtp service that works with Hikvision 2xx2 devices on 5.4.5 fw?
I only use the alerts for any storage disconnection issues etc, it's not firing out motion detection alerts all day.
I've done a lot of testing over the last 48 hours and tried all I can think of. Variations of configs, reboot cams after config change etc. I remembered to temporarily relax my firewall rules on my router (cams are locked down to DNS IP address and NTP and SLL/TLS ports outbound only) to check I wasn't blocking myself, but it's not that. I've tried setting the config via IVMS-4200 and the browser interface. I've also read a lot of posts on the subject. Results and success seem very varied.
Any tips or ideas appreciated.