Hi,
I use IPtv system which consist of one IPtv network Hikvision camera connected to 4 poe ports Hikvision nvr
Existing camera Is on nvr poe port 1 (D1) and Is working OK with status In green - It Is connected using plug and play method and IP Is 192.168.254.2
Hikvision nvr has 192.168.0.160 local address
I am trying to add a second Hikvision Ip cam to d2 poe port
I am using poe connection
the Hikvision camera I want to add was activated prior to be plugged Into poe port 2 of nvr
camera Ip address was changed from default one (192.168.1.64) to 192.168.0.60, also camera password Is changed to use same pass as admin pass of nvr
In NVR pool In online devices ready to be added I see new camera (192.168.0.60) Is with OK online (green ) status - It Is with correct model and firmware version
when I try to add camera using plug and play method the cam moves upstairs to D2 , try to detect, then get user or password Is wrong error, and status Is In red
when I try to add camera using manual method I get network error
please advise what Is wrong and how can I add successful second camera
I use IPtv system which consist of one IPtv network Hikvision camera connected to 4 poe ports Hikvision nvr
Existing camera Is on nvr poe port 1 (D1) and Is working OK with status In green - It Is connected using plug and play method and IP Is 192.168.254.2
Hikvision nvr has 192.168.0.160 local address
I am trying to add a second Hikvision Ip cam to d2 poe port
I am using poe connection
the Hikvision camera I want to add was activated prior to be plugged Into poe port 2 of nvr
camera Ip address was changed from default one (192.168.1.64) to 192.168.0.60, also camera password Is changed to use same pass as admin pass of nvr
In NVR pool In online devices ready to be added I see new camera (192.168.0.60) Is with OK online (green ) status - It Is with correct model and firmware version
when I try to add camera using plug and play method the cam moves upstairs to D2 , try to detect, then get user or password Is wrong error, and status Is In red
when I try to add camera using manual method I get network error
please advise what Is wrong and how can I add successful second camera
Last edited: