Extending CAT6 Cable - Accidentally Cut

[h901]

Hi

I've installed CAT6 cable around my home in preparation for installing my IP cameras.

One of the cable accidentally got cut and I don't want run a new cable as it's fitted through the walls. What would be the best solution to ensure that my cameras will work fine? Could I use a coupler? Or would that hinder the cameras performance.

If needed, I could run a new cable but it will be a lot of work.

Thanks

 

[badmannen]

Just use one of good quality and you should be fine.

Sent from my One Plus X using tapatalk

 

[fenderman]

A coupler will increase attenuation which can be an issue in a long run...depending on where it is located it can degrade and oxidize (i would wrap it in coax seal)...cant hurt to try it..

 

[whoslooking]

Use gel crimps connectors they make the best repair.

 

[pal251]

Coupler , they make a punch down coupler that I've seen on amazon before but never used it

 

[Schmark]

On 2 of my cameras, the path is tricky and required he use of two couplers per line. I bought metal-case Cat6 couplers from Amazon and they work fine.

-S

 

[copex]

you can use a Cat6 joint box Like this

 

[h901]

Thanks everyone. I'll try use a coupler and see how it goes.