Today I tried all day to configure a kit of 4 IP cameras (Dahua IPC-HFW1230S) and NVR (Dahua NVR2104). I managed to do the wiring and connect all 4 cameras to the NVR. After I configured the NVR (Quick Start Guide, with date and time, network, etc.), all the cameras displayed the message "Incorrect password" on the monitor. I searched a lot on google, forums, user manuals, videos, but none helped me. I read that I should initialize the cameras using the ConfigTool application, but they do not appear in my application (only the NVR appears, with its IP) and the cameras appear for a very short time, only after a factory reset to the NVR and then they disappear (moment when I tried to initialize them, but I get a connection error, maybe timeout). I mention that I use a Huawei router provided by the ISP whose gateway address is 192.168.100.1, and the NVR connection address is 192.168.100.1. It also has one more IP (10.1.1.1) -im 100% confused- and the cameras have 10.1.1.64 - 68 or something. Their IP address (10.1.1.64 - 68) is visible above the invalid password message.
Please help me with correct and complete initialization tips and steps.
Please help me with correct and complete initialization tips and steps.