I got 10 of my 14 cameras installed (still waiting on 4 in the mail). However, only 7 cameras are recognized and showing on the NVR. The other 3 don't even show up as online. And then one of them shows a green screen over the image. All the connected lan cables are flashing yellow and green so there is data. Any ideas how to get the three that don't show up to connect and then how to get the green screen one to work? If it helps, the three that don't show are the 4mp cameras, and the one with the green screen is the 4th 4mp camera.
- I tested all the cables and cameras on the NVR prior to install and they all were recognized and showed a feed (one at a time).
NVR: 7716N-E4/16P
Cameras: (6) 2032i / (4) 2042wd-I
- I tested all the cables and cameras on the NVR prior to install and they all were recognized and showed a feed (one at a time).
NVR: 7716N-E4/16P
Cameras: (6) 2032i / (4) 2042wd-I