Help Surv Co Owner Design his home system?

looney2ns said:
What exact Model of PTZ?
Why did you mount your other cameras so high?
Click to expand...

The high cameras are only overwatch cameras on the sides of the house with no lower windows. There’s only two that are high.

Dahua SD59925U-HNI is the PTZ.
 
Cameraguy said:


Read instructions in the videos description
Click to expand...


@Cameraguy my backend is different than yours. For example, once I go to settings tab - there is no PTZ.

there isn’t even a settings tab - it’s setup.

seems Dahua has updated this since you’ve done your video?

see attached photo for my screen.
 

Attachments

  • 35F71204-2D7D-42C9-8F5A-DF65FAB49E11.jpeg
    35F71204-2D7D-42C9-8F5A-DF65FAB49E11.jpeg
    292.6 KB · Views: 6
Last edited:
CastleSurveillance said:
@Cameraguy my backend is different than yours. For example, once I go to settings tab - there is no PTZ.

there isn’t even a settings tab - it’s setup.

seems Dahua has updated this since you’ve done your video?
Click to expand...

Additionally, @Cameraguy - I've been able to figure out most steps - but once I get to add a rule, intrusion - when I go to draw the rule, it will not allow me to draw on the screen.
 
@looney2ns Do you have experience with these active deterrence cameras from Dahua? I have model IPC-HDW5541HP-AS-PV at the front door - and no matter what I do - once I turn a tripwire on to send me a push notification to my phone that someones at the front door - and someone crosses that tripline, it sounds the alarm. I can't even figure out where to turn the alarm on and off? I do not want the alarm - only the trip wire for push notifications.

when I try to log into each cameras IP address - it will not allow me. It will only allow me to login into the NVRs IP address through the chrome extension.
 
Last edited:
You need to paint your cameras to match your house... It will help on the WAF issues
 
Ckb3 said:
You need to paint your cameras to match your house... It will help on the WAF issues
Click to expand...

meh I like them to stand out a little. I think the best avoidance to theft is blatant cameras directly in your face.
 
CastleSurveillance said:
@looney2ns Do you have experience with these active deterrence cameras from Dahua? I have model IPC-HDW5541HP-AS-PV at the front door - and no matter what I do - once I turn a tripwire on to send me a push notification to my phone that someones at the front door - and someone crosses that tripline, it sounds the alarm. I can't even figure out where to turn the alarm on and off? I do not want the alarm - only the trip wire for push notifications.

when I try to log into each cameras IP address - it will not allow me. It will only allow me to login into the NVRs IP address through the chrome extension.
Click to expand...
Again, you need to login directly through the cams own web gui.
 
  • Like
Reactions: Cameraguy
looney2ns said:
Using broswer, Log into the NVR via it's web interface. Open cam registration in the NVR, In the cam list, there should be an IE symbol in that list. Click it and it should connect to the cam directly in your broswer
Click to expand...

tried that. if I click that it does nothing.
 
looney2ns said:
Using broswer, Log into the NVR via it's web interface. Open cam registration in the NVR, In the cam list, there should be an IE symbol in that list. Click it and it should connect to the cam directly in your broswer
Click to expand...

actually, take that back. If I click that IE symbol - this is where it takes me. If I click connect it does nothing.
 

Attachments

  • image.jpg
    image.jpg
    6.1 MB · Views: 7
You must log in or register to reply here.
Top Bottom