Hikvision 2032's time not syncing with computer/bvr

Chust

Chust

Getting the hang of it
Nov 10, 2014
428
38
This has been an on going problem for me.
I am using the d2d feature in bi for recording. So I really need to get this working properly.
First off I know it's not bi.
Second this computer/bvr is not hooked into the internet (not using net for time sync).
Third the device time never syncs to computer/bvr time.
Forth all cams times always will vary from perfect to being 2-3 seconds off of each other.
Fifth I have tried all the options in the firmware.
Sixth I'm frustrated!

Guy's please throw me a list of things to try or let me know if this is a known issue with Hikvisions.
 
Last edited by a moderator:
2-3 seconds is nothing to be concerned about..if you want you can run you own time server on that computer
 
  • Like
Reactions: Chust
ok i thought you could do that. How do i do it? A link to a site is fine. plus I will goog it.
 
I found a fix!!!
No matter what I did I couldn't get the time for all my 2032's to synchronize together. Even the http://www.timesynctool.com/ didn't nail it perfect.
So, I said heck with it.
Then tonight I thought lets try ivms 4200 station that Hikvision offers for free to view the cams. (pretty good software)
Ivms lets you go directly into settings for the cams right there. (no ie needed)
Here's what fixed it. I right clicked each cam in the viewer, went down to synchronize clicked it. Boom! All was synchronized!
Closed ivms opened bi and all is perfect!

I hope this helps you all that have this issue.
 
Last edited by a moderator:
  • Like
Reactions: Zxel
You must log in or register to reply here.
Top Bottom