Hi everyone,
I installed two Hikvision DS-2CD2142FWD-IS cameras this weekend, but the only image adjustment settings I have are 'Brightness', 'Contrast' and 'Saturation'. From what I've seen online there should be a heap more adjustments available, such as gain, sharpness, day/night switch and, most importantly, WDR on/off.
I've tried changing it by going through the NVR (DS-7604NI-E1-4P), website login and the latest version of the iVMS-4200 software but the settings are still the same boring 3. I bought them locally from a guy who didn't use them on a project, so I'm not sure if they were originally from AliExpress etc but everything is in English and there's no Chinese writing on the box or menus. I tried updating the firmware from the Hikvision website but it didn't work, though I would have assumed these sort of adjustments would be standard straight out of the box.
Please see the image attached below. If anyone has any ideas I'd be very grateful.
I installed two Hikvision DS-2CD2142FWD-IS cameras this weekend, but the only image adjustment settings I have are 'Brightness', 'Contrast' and 'Saturation'. From what I've seen online there should be a heap more adjustments available, such as gain, sharpness, day/night switch and, most importantly, WDR on/off.
I've tried changing it by going through the NVR (DS-7604NI-E1-4P), website login and the latest version of the iVMS-4200 software but the settings are still the same boring 3. I bought them locally from a guy who didn't use them on a project, so I'm not sure if they were originally from AliExpress etc but everything is in English and there's no Chinese writing on the box or menus. I tried updating the firmware from the Hikvision website but it didn't work, though I would have assumed these sort of adjustments would be standard straight out of the box.
Please see the image attached below. If anyone has any ideas I'd be very grateful.