Hikvision DS-KV8213-WME1 ONVIF not working

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
Ok, not much added there in the spoiler section, :). Don't think those added lined at the top of extensions are important for the working video?

I thought you had a lot more config for the endpoints, pjsip contains a lot more lines it seems then chan_sip
 

hiklinux

n3wb
Joined
Jan 11, 2021
Messages
19
Reaction score
2
Location
Aruba
All other [10x] sections in the sip.conf are the same, as [101] one from spoiler. Total file length is 647 bytes.
 

hiklinux

n3wb
Joined
Jan 11, 2021
Messages
19
Reaction score
2
Location
Aruba
The rest lines in extentions.conf are like
Code:
exten => 101,1,Dial(SIP/101,60)
and there are some specific call forwarding numbers/rules, access to the voicemail etc.
This file is also not large ~2kbytes.
 
Last edited:

misho

n3wb
Joined
Oct 12, 2015
Messages
8
Reaction score
3
Location
Bulgaria
Thanks to all who answered. I will check the configurations and write further. What version of asterisk are you using? I am using asterisk-18.14.0. PJSIP
 

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
tested with chansip now
indeed, calling linphone directly now works witout a trunk :)

anyway
early media still not possible when calling 2 extensions simultanously (testing with 3 linphone users registered as 6000,6001,6002

pff :-(

i have send you a PM
 

Aus_fas

Young grasshopper
Joined
Aug 24, 2019
Messages
59
Reaction score
2
Location
Australia
Hello,

I am trying to connect Hikvision DS-KV8213-WME1 to DAHUA NVR5208-4KS2 V4.002.0000000.4.R (ONVIF protocol), but without success.
DS-KV8213-WME1 firmware is V2.2.53 build 220816.
I don't see any option on DS-KV8213-WME1 about configuring a separated ONVIF account.
I am trying to access the camera (intercom) via RSTP but it's also does not working rtsp:/admin:XXXXXXXXXXXXXX@192.168.1.22:554/Streaming/Channels/101/
VLC asking for password... (password is correct, but still asking.
I have enable SSH and try to connect via SSH (root and admin password, but it says... wrong password).
Any ideas ?

I have another problem too. I am trying to connect this intercom to asterisk PBX but it wants to work.
Register Status is: Registered but when push the button says: Calling failed.
I configured the PBX and intercom according to the instructions I found.

Thanks in advance!
Did you end up finding a way to get video on Dahua NVR ?
I have the same setup and I can view the video in VLC using the following strings
rtsp:/admin: password@192.168.1.51:554/Streaming/Channels/101
rtsp:/admin: password@192.168.1.51:554/onvif1
But getting the error "The login return time is up" in Dahua NVR
 

misho

n3wb
Joined
Oct 12, 2015
Messages
8
Reaction score
3
Location
Bulgaria
Did you end up finding a way to get video on Dahua NVR ?
I have the same setup and I can view the video in VLC using the following strings
rtsp:/admin: password@192.168.1.51:554/Streaming/Channels/101
rtsp:/admin: password@192.168.1.51:554/onvif1
But getting the error "The login return time is up" in Dahua NVR
Couldn't get it to connect to the dahua nvr. And I haven't tried again. I may take to look for a solution... Or if there is another firmware that gives access to the operating system of the camera itself.
 
Last edited:
Top