Hikvision DS7604NI-E1 bricked. HELP!

[alastairstevenson]

hiktools will only change the language of the header in the firmware, not the language of the NVR.
If you are lucky you might have a device where the bootpara is not encoded, in which case this will work :

How to - Fix your 15-beep-bootloop Hikvision DS-76xxN-Ex NVR, or convert to EN and make it updatable

Here is a worked example of how to permanently change a Hikvision China language DS-76xxN-Ex NVR to an EN language device that will then take the stock EN/ML firmware. I've used a few Hikvision CN NVRs, bought at low cost off Aliexpress, and typically installed 'hacked to English' firmware to...

ipcamtalk.com

If not, it will need some ' hacked to English' firmware.

 

[bixpii]

Thanks for reply but Where i can find 'hacked to English' firmware?
I tried but not same, will it work?

 

[alastairstevenson]

Yes, that block is encoded unfortunately.
I'm away just now, will reply when I'm back, tonight.

 

[bixpii]

Yes, that block is encoded unfortunately.
I'm away just now, will reply when I'm back, tonight.

Thankyou.
Hope you can help me this problem! Thankyou

 

[alastairstevenson]

Check your 'conversations'.

 

[bixpii]

Check your 'conversations'.

Thankyou so much Ala!!! You is the best in forum!

 

[alastairstevenson]

Thankyou so much

You are welcome.
Glad that worked for you ...