Hi guys/girls
Need some help.
I have bought a 4 channel 4K nvr. With 4x 5mp turent cameras.
I have set it all up and been asking on other forums for advice but not getting anywhere
I have this system attached to my 4K tv.
Now the problem is. I can only view all 4 cams at 1080p in a 4 screen split. If I choose to set them all to 5mp only 1 camera works in the 4 split screen at 5mp. I can then click the the other 3 cams to substream but quality is poor!
So options I have is set it all to 1080p this will record all 4 at 1080p and all can be viewed in split screen at 1080p and in single screen at 1080p.
Or I set them all at 5mp they will record at 5mp but 4 plit screen will be in substream! Very poor. But if I double click 1 of the cams to view in single screen it will be 5mp.
I am gutted as I payed extra for 5mp cams. But seems like they can only be viewed in 4 split screen in substream aka 720p.
So I hav replaced my old 2mp system with the exact same setup as I can’t get a better 4 split screen view than 720p unless setting all at 1080p but then it’s wasting the 5mp cams.
All I want is to view them all in 4 split screen at 1080p. But when double click a cam in single screen I want it to be 5mp And to record at 5mp is this possible ?
Any advice?
Thanks
Need some help.
I have bought a 4 channel 4K nvr. With 4x 5mp turent cameras.
I have set it all up and been asking on other forums for advice but not getting anywhere
I have this system attached to my 4K tv.
Now the problem is. I can only view all 4 cams at 1080p in a 4 screen split. If I choose to set them all to 5mp only 1 camera works in the 4 split screen at 5mp. I can then click the the other 3 cams to substream but quality is poor!
So options I have is set it all to 1080p this will record all 4 at 1080p and all can be viewed in split screen at 1080p and in single screen at 1080p.
Or I set them all at 5mp they will record at 5mp but 4 plit screen will be in substream! Very poor. But if I double click 1 of the cams to view in single screen it will be 5mp.
I am gutted as I payed extra for 5mp cams. But seems like they can only be viewed in 4 split screen in substream aka 720p.
So I hav replaced my old 2mp system with the exact same setup as I can’t get a better 4 split screen view than 720p unless setting all at 1080p but then it’s wasting the 5mp cams.
All I want is to view them all in 4 split screen at 1080p. But when double click a cam in single screen I want it to be 5mp And to record at 5mp is this possible ?
Any advice?
Thanks