Go to the Day/Night option (3 down from shutter/exposure setting) and change it from auto to color.
I have the Loryta IPC-B54IR-ZE and having noise issues at night
- Thread starter Terri Underhill
- Start date
I don't have a COLOR option. Everything under the drop down is grayed out in every setting.
Attachments
You are looking at the profile - look at MODE on that page - it is set to auto - change it to COLOR
Under Profile Management, change Day/Night to Full Time and then you should get access to it.
Parley
Known around here
To me it looks like you clicked on Profile and the list dropped down and covered Mode. Click on profile again and see if Mode comes into view. However, wittaj could well be right.
I got the color back along with a shitty image
Attachments
The faster the shutter, the more light is needed.
The slower the shutter, the less light is needed, but more chance for motion blur.
That is why the camera went into B/W because it believed for the shutter speed and available light that there wasn't enough for color.
So if you can live with some blur, slow the shutter down. Try 1/60
The slower the shutter, the less light is needed, but more chance for motion blur.
That is why the camera went into B/W because it believed for the shutter speed and available light that there wasn't enough for color.
So if you can live with some blur, slow the shutter down. Try 1/60
bigredfish
Known around here
If this is a live stream the quslity hasnt changed in 2 days. Almost as if none of your changes are being applied to the stream
Nest Cam – Okie Bird Cam
Nest Cam – Okie Bird Cam
It seems crazy that I have to do anything. Two weeks ago I didn't have issues with noise. The only thing that has changed is the weather. It went from 65 to 6 degrees. All this noise came up when the weather turned cold. I'll see about 1/60... There is really quite a bit of light on the barrel. Enough to cause a shadow on the ground and the barrel is 16' off the ground. This is frustrating.
If it is LED lighting, some cheap LEDs don't get as bright when it is cold.
Look at this from last year. I don't mess with the settings. The video isn't as good now as it was last April. Let me know what you think...thank you! And look at how much more you can see below the barrel in the video. And I actually raised the barrel about 6" Thanksgiving day so the barrel is a tad closer to the light.
Even my platform feeder cam looks better than this cam and it's a IP5M-T1179E It's here under bird cam tab- Okie Bird Cam – My WordPress Blog I'm going to see what it's settings look like...
Attachments
3dNR wasn't on. I know I selected it but I must have not hit apply. I think that fixed it. YAY Thank you!
So these are my final settings. Can I apply these settings to my 360 cam so it will be in color? I will add a screen capture showing my settings before I do anything. And BTW I don't receive an email when someone posts to this thread. I checked my email address and it is correct. I did a screen capture. Thank you everyone for your help. I appreciate your time. I will let you know when Carol lays her first egg. That is when it gets busy around here 
Attachments
I just added a video of Jack coming in this morning and evening. I'm thinking there might be too much blur when my owl moves in low light. These are the settings for this cam in the web UI Please let me know if there is anything you suggest to improve my video. Thanks again for all your help.
Attachments
You now have the exposure on auto so the shutter could drop as low as 1/3s, thus causing the blur.
You need a min 1/30 shutter but preferably 1/60s or faster.
You need a min 1/30 shutter but preferably 1/60s or faster.
MikeLud1
IPCT Contributor
Also you need to turn on 3D NR and set it to about 40-50