in BI 4 video is only clear when you view camera full frame, help?

[adamfarber]

Hi all, I have an interesting dilemma, I have 8 cameras, one of which is a Reolink RLC-410. On the desktop in Blue Iris as you can see when I see all my 8 cameras in the one frame the Reolink one does not look good HOWEVER when I double click on it and open it full frame it is perfect (as you can see). It's a little annoying as when I look at all cameras it's not clear unless I view that camera alone.

Any help?

Thanks,

Adam Farber

 

[fenderman]

See this thread..Jagged downsizing with 2560x1440 camera
You should email support because in the past this generally was not an issue...
Side note, camera properties>general>event color...set each camera to a different color, now you can see them independently on the time line (for future recordings)

 

[adamfarber]

Hey Fenderman, I know I can usually count on you for help! I had already e-mail BI and I paid for Priority support but it takes a while still, usually a 2nd e-mail. I tried the scaling just now per your link and it worked perfectly BUT it raised the CPU from like 34% to 64% so that is no good, perhaps Ken at BI can let us scale individual cameras but let's see what he says. Thanks again, Adam

 

[fenderman]

Hey Fenderman, I know I can usually count on you for help! I had already e-mail BI and I paid for Priority support but it takes a while still, usually a 2nd e-mail. I tried the scaling just now per your link and it worked perfectly BUT it raised the CPU from like 34% to 64% so that is no good, perhaps Ken at BI can let us scale individual cameras but let's see what he says. Thanks again, Adam

i think its a bug that manifests with specific layouts and resolutions.....