There is a new firmware from Hikvision itself where the 'white light trigger on detections' option is added so no need for custom firmwares, V5.5.160 -> DOWNLOAD EU PORTAL
After testing custom firmware from Perth my advice is if you don’t need the white light trigger don’t upgrade pass 5.5.150_200927.There is a new firmware from Hikvision itself where the 'white light trigger on detections' option is added so no need for custom firmwares, V5.5.160 -> DOWNLOAD EU PORTAL
????There is a new firmware from Hikvision itself where the 'white light trigger on detections' option is added so no need for custom firmwares, V5.5.160 -> DOWNLOAD EU PORTAL
They are official Hikvision OEM models - it may come with or without a logo, but will have the most recent firmware on it.Hey All,
I'm new to the forum, but came across this while searching for reviews on the new unit.
I have a question more around Empiretecandy models - a bit confused.
Are these original Hikvision units (They arent branded as such) and just need to be flashed with HV SW?
Do they hae any physical/technical differences and anything to look out for?
They are significantly cheaper, so just trying to understand.
Thank you
Thank you clarifying, so just the logo may be missing?They are official Hikvision OEM models - it may come with or without a logo, but will have the most recent firmware on it.
Removed from the portals, maybe considered a bit too bugged, but still available via the product page :????
Interesting,Removed from the portals, maybe considered a bit too bugged, but still available via the product page :
DS-2CD2087G2-L(U)
Hikvision DS-2CD2087G2-L(U) 4 K ColorVu Fixed Bullet Network Camerawww.hikvision.com
Type | 2xx6G2/2xx7G2(V5.5.150) | 2xx6G2(C)/2xx7(C)(V5.5.112) |
OSD | Support custom colors | Does not support custom colors |
Monitoring Mode | Only 8MP models support monitoring mode, Face Capture and Smart Event mode. For details about the functions supported by each mode, please refer to Note. | All models of the 2 series support monitoring mode, Face Capture and Smart Event mode. For details about the functions supported by each mode, please refer to Note. |
WDR | Edge flaws are obvious | Perfect performance |
Coding | Compliant with configuration, low bitrate at night | The night bitrate is 2 times larger than 2xx6G2/2xx7G2, and the overall configuration is in line with the configuration |
Resolution | The third stream supports up to 720P@30fps | Remove the resolution 2592*1944 from 2x46G2 models; Remove the resolution 2304*1296 from 2x46G2 and 2x47G2 models; The third stream supports up to 1080P@10pfs; |
Yes, I had seen this as well, and puzzled over what the 'C' might mean.I have no idea what the 'C' behind the product name means? In the release notes, they list the difference between:
2xx6G2/2xx7G2(V5.5.150)
2xx6G2(C)/2xx7(C)(V5.5.112)
Where 5.5.150 is the G3 firmware and 5.5.112 the G5 firmware, so G5 firmware only for 'C' models? Very unclear..
I still have 3 in the box waiting for installation, maybe I try that G5 firmware on one of them soon.Very Interesting read about the G5 Firmware , I am not brave enough to try this on mine.
Are these the (C) model variant?I still have 3 in the box waiting for installation,
No, like you I also have no idea what the 'C' variant is, I will contact Hikvision for that.Are these the (C) model variant?