InkoVideo W-105 with BI

[BavariaBlue]

Guys,

I'm new to the IP Cam world and I'm currently helping a friend of mine to install his IP Cams under BI. He bought 4 Foscam Cam's, and installed them without any problems.
By mistake, he bought also aCam from InkoVideo, which is not in the list of supported cameras. :sad: (or at least we couldn't find it)

I was under the impression that this cam can be installed "manually" by using Information provided by IspyConnect (http://www.ispyconnect.com/man.aspx?n=Inkovideo) but is not 100% clear to me how to do this? How do I enter the Data into the Input Mask "Network Ip Camera Information"

PS: Will this camera work at all?

thanks in advance

 

[fenderman]

Welcome to the forum. From the camera drop down...select rawh.264/mpeg.mpeg4
The enter the info...

 

[BavariaBlue]

Welcome to the forum. From the camera drop down...select rawh.264/mpeg.mpeg4
The enter the info...

Thx... not sure if there is a general Issue with InkoVideo, but the camara never workd in BI.

Finally we gave up, returned the InkoVideo and purchased a Foscam.

 

[fenderman]

Those look like rebranded foscams anyways....Just so you know, there are much better options than foscam....Look at hikvision and dahua.