Moved our DS-7608NI-K1 to a different location and installed a DS-7616NI-K2/16P (FW version: 4.74.205_230712) at my parents house for their HikVision PoE cameras. Used to have 6x 4MP cameras, recently added two more to cover some blind spots. Everything is being recorded to a 6TB WD Purple HDD inside the NVR.
So far:
1x DS-2CD2T43G2-4I (FW version: 5.7.14_231213)
2x DS-2CD2043G2-IU (the two recent additions) (FW version: 5.7.14_231213)
2x DS-2CD1043G0-I (FW version: 5.7.21_231213)
3x DS-2CD1043G0-IUF (FW version: 5.7.21_231213)
All eight are recording 4MP @ 15 fps with 8192 bitrate, H264.
The two new cameras are incredibly laggy, both with Live View and playing back a recording. If I run the RTSP stream from any of the two new cameras in a VLC window, I can see the time in the top left corner jumping all over the place. It's 8:50 PM as I'm writing this, and in front of me the stream showed a time of 20:50:34 and the seconds went up as I was watching it, then suddenly the stream froze for a second and it skipped back to 20:50:15 and started from there. This happens multiple times if you keep watching the stream for a few minutes.
Recordings from the cameras are no better, they're very choppy and the audio constantly cuts in and out.
If I watch the live stream of any of the remaining six cameras or even recordings from them, they're as clear as they've always been and the audio doesn't cut out every few seconds.
I thought perhaps they needed a firmware update, so I sat down and updated everything. All eight cameras and the NVR. Nothing changed.
Is my NVR maxed out or are the cameras faulty?
So far:
1x DS-2CD2T43G2-4I (FW version: 5.7.14_231213)
2x DS-2CD2043G2-IU (the two recent additions) (FW version: 5.7.14_231213)
2x DS-2CD1043G0-I (FW version: 5.7.21_231213)
3x DS-2CD1043G0-IUF (FW version: 5.7.21_231213)
All eight are recording 4MP @ 15 fps with 8192 bitrate, H264.
The two new cameras are incredibly laggy, both with Live View and playing back a recording. If I run the RTSP stream from any of the two new cameras in a VLC window, I can see the time in the top left corner jumping all over the place. It's 8:50 PM as I'm writing this, and in front of me the stream showed a time of 20:50:34 and the seconds went up as I was watching it, then suddenly the stream froze for a second and it skipped back to 20:50:15 and started from there. This happens multiple times if you keep watching the stream for a few minutes.
Recordings from the cameras are no better, they're very choppy and the audio constantly cuts in and out.
If I watch the live stream of any of the remaining six cameras or even recordings from them, they're as clear as they've always been and the audio doesn't cut out every few seconds.
I thought perhaps they needed a firmware update, so I sat down and updated everything. All eight cameras and the NVR. Nothing changed.
Is my NVR maxed out or are the cameras faulty?