Isolated cameras -- How do I pull the substream if they don't have internet?

tofu

Getting the hang of it
Joined
May 3, 2019
Messages
113
Reaction score
72
Location
NYC
Not sure what the proper lingo for this is, so i'm having difficulty searching.

My setup:
Camera -> Switch -> BI PC -> router (via wan)

With this setup, my cameras have no access to the internet. I'm not doing anything tricky with VLANS. I just have the cameras set to a static IP and left the gateway blank.


What i'm trying to accomplish is pull the mjpeg substream from the camera directly, instead of blue iris' mjpeg stream, so I can offload some CPU usage. Since the cameras have no access to the internet, how can I do this?

My reasoning for wanting a stream is so that i can have it displayed on my actiontiles dashboard. It requires mjpeg. I have it working fine right now pulling from BI, but that's bumping CPU usage up another 25%

Thank you
 

tofu

Getting the hang of it
Joined
May 3, 2019
Messages
113
Reaction score
72
Location
NYC
Thanks. I'll look into how that works
 
Top